i5 Industries Kai R2040 User manual

R2436
Assembly: Return Shell
24x36 Reversible Return
R2442 24x42 Reversible Return
R2448 24x48 Reversible Return
MODELS: R2040 20x40 Reversible Return
Scan Me
to watch
Assembly
Instructions

Required tools:
Recommended tools:
REVERSIBLE RETURN
INFORMATION
Flathead or Philips
#2 Screwdriver
#2
Highly recommended when
assembling: L-shape
configuration or
attaching pedestals
4mm
• Metal brackets and screws can be used for additional strength.
• Place all laminated parts on a clean and smooth surface such as
a rug or carpet to avoid
the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples & packing straps
before you start to assemble.
• Line up holes for cam locks.
• Put on sticker caps last.
• Keep all hardware parts out of reach of children.

PART QTY.
MODESTY PANEL 1
END PANEL 1
TOP 1
PART QTY.
Metal Pin 8
Cam Lock 8
Set Screw 8
Cap Sticker 15
Adjustable Glide 4
Wood Dowel 8
Grommet Hole Cover 2
Screw 28
Flat Bracket 2
PARTS & HARDWARE
REVERSIBLE RETURN
B
C
D
E
F
G
K
S
A
12

1. HARDWARE INSTALLATION
REVERSIBLE RETURN
These instructions detail if the return is to be positioned on the left side if you are
sitting at the desk. If you wish for the return to be postioned on the right, you need
to reverse the postion of the items accordingly.
Insert three additional cam
locks and cams in the addi-
tional positions provided. (Two
in the underside of the work-
surface and back panel and
one additional in the side and
back panels).
Insert the four adjustable
glides in the back panel and
side leg panel as shown.
It is easier to install two of the
flat brackets to the assembled
desk unit first rather than the
return unit. This allows for
easier installation of the return
unit to the desk unit top. Secure
all brackets with 6 screws each.
Recommended tools:
(A)
(F)
(D) (C)
(B)
(I)
(J)
(E)
For Left Return For Right Return
(A)
(F)
(A)
(F)

2. PUT IN GROMMETS & PUT ON CAP STICKERS
REVERSIBLE RETURN
Note: Place cap stickers on any exposed holes.
(G)
(D)