i5 Industries Kai DT3071 User manual

Assembly: D-Top Desk
MODELS: DT3071 30x71 D-Top Desk
DT3671 36x71 D-Top Desk

Place all laminated parts on a clean and smooth surface such as •
a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware. •
Remove all wrapping materials, including staples & packing •
straps before you start to assemble.
Line up holes for cam locks. •
Put on sticker caps last. •
Keep all hardware parts out of reach of children. •
Inspect all holes to ensure their isn't any debris. •
TWO PEOPLE ARE
REQUIRED TO
ASSEMBLE AND MOVE
THIS MODEL
Required tools:
INFORMATION
Flathead or Philips
#2 Screwdriver
#2
4mm
D-TOP DESK
*Drill Required

PART QTY.
LARGE END PANEL 1
SMALL END PANEL 1
LEG 1
TOP 1
PART QTY.
Metal Pin
11
11
11
11
Cam Lock
Set Screw
Cap Sticker
Adjustable Glide 4
6
Wood Dowel
Screw #4 15
PARTS & HARDWARE
D-TOP DESK
B
C
D
E
F
G
A
Screw #5 5
H

1. HARDWARE INSTALLATION
Complete this step for both the left and right end support.
D-TOP DESK
3X (A)
3X (F)
Insert by hand only
F

2. HARDWARE INSTALLATION
D-TOP DESK
6X (B)
6X (C)

3. ATTACH LEGS TO D-TOP
Tightening
Tightening
F
E
A
IG
H
D-TOP DESK
Required tools:

5. PUT ON CAP STICKERS
Note: Place cap stickers (D) on any exposed holes.
D-TOP DESK