i5 Industries Kai D2448 User manual

D3048
D3060
D3066
D3071
D3671
Assembly: Desk Shell
30x48 Desk Shell
MODELS: D2448 24x48 Desk Shell
30x60 Desk Shell
30x66 Desk Shell
30x71 Desk Shell
36x71 Desk Shell
Scan Me
to watch
Assembly
Instructions

Place all laminated parts on a clean and smooth surface such as •
a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware. •
Remove all wrapping materials, including staples & packing •
straps before you start to assemble.
Line up holes for cam locks. •
Put on sticker caps last. •
Keep all hardware parts out of reach of children. •
Inspect all holes to ensure their isn't any debris. •
TWO PEOPLE ARE
REQUIRED TO
ASSEMBLE AND MOVE
THIS MODEL
Required tools:
Recommended tools:
DESK SHELL INFORMATION
Flathead or Philips
#2 Screwdriver
#2
Highly recommended when
assembling: L-shape
configuration or
attaching pedestals
4mm

PART QTY.
MODESTY PANEL 1
RIGHT SIDE END PANEL 1
LEFT SIDE END PANEL 1
TOP 1
PART QTY.
Metal Pin 15
Cam Lock 15
Set Screw 15
Cap Sticker 15
Adjustable Glide 4
Wood Dowel 15
Grommet Hole Cover 2
PARTS & HARDWARE
DESK SHELL
B
C
D
E
F
G
A

3X (A)
3X (F)
1. HARDWARE INSTALLATION
Insert by hand only
Complete this step for both the left and right end support.
DESK SHELL
F

9X (F)
2. HARDWARE INSTALLATION
Insert by hand only
9X (A)
DESK SHELL

6X (B)
6X (C)
3. ASSEMBLE END SUPPORTS TO MODESTY
DESK SHELL

4.
PLACE TOP ON ASSEMBLED MODESTY AND END SUPPORTS
DESK SHELL
(E)

2X (G)
5. PUT IN GROMMETS & PUT ON CAP STICKERS
Note: Place cap stickers (D) on any exposed holes.
DESK SHELL