i5 Industries Kai CT71 User manual

Assembly: Conference Table
MODELS: CT71 71” Conference Table
Scan Me
to watch
Assembly
Instructions

Place all laminated parts on a clean and smooth surface such as •
a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware. •
Remove all wrapping materials, including staples & packing •
straps before you start to assemble.
Line up holes for cam locks. •
Put on sticker caps last. •
Keep all hardware parts out of reach of children. •
Inspect all holes to ensure their isn't any debris. •
TWO PEOPLE ARE
REQUIRED TO
ASSEMBLE AND MOVE
THIS MODEL
Required tools:
Recommended tools:
71” CONFERENCE TABLE
INFORMATION
Flathead or Philips
#2 Screwdriver
#2
Highly recommended when
assembling: L-shape
configuration or
attaching pedestals

PART QTY.
MODESTY PANEL 1
RIGHT SIDE END PANEL 1
LEFT SIDE END PANEL 1
TOP 1
PART QTY.
Metal Pin
11
11
11
11
11
Cam Lock
Set Screw
Cap Sticker
Adjustable Glide 4
Wood Dowel
PARTS & HARDWARE
B
C
D
E
F
A
71” CONFERENCE TABLE

1. HARDWARE INSTALLATION
Assemble modesty panel with end panels.
(F)
2X (A)2X (F)
(E)
(A)
Insert by
hand only
71” CONFERENCE TABLE
7x (B)

2. HARDWARE INSTALLATION
7X (A)7X (F)
(A)(F)
Insert by hand only
71” CONFERENCE TABLE
Place all hardware in correct holes. Once that is complete line the holes up and
place the base onto the top. Use set screw (C) to lock all cams and metal pins in
place.
7x (C) 7x (B)

(D)
3. PUT ON CAP STICKERS
Note: Place cap stickers on any exposed holes.
71” CONFERENCE TABLE
11X (D)
TWO PEOPLE ARE
REQUIRED TO
FLIP AND MOVE
THIS MODEL