IBM T750 User manual

T750
User's Guide
Color Monitor
English

First Edition (June/2002)
Note: For important information, refer to the Monitor Safety and Warranty manual that comes with
this monitor.
T750_Sep.fm Page 2 Wednesday, May 22, 2002 10:13 AM

1
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Contents
Safety (Read first) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Handling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Workplace Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting the Monitor Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Working Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Caring for your Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting your Monitor for Analog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting your Monitor for Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching on your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Device Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Windows Millennium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Windows 98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Windows 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Auto Setup (Analog Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Auto Setup for DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Auto Setup for Windows 3.1, Windows 95, Windows 98, Windows 2000
Windows NT, Windows Me or Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Manual Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
User controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
On-screen display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Display modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Product Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Further Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Notices and Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
T750_ETOC.fm Page 1 Monday, June 3, 2002 3:51 PM

2
í í í
T750_E.fm Page 2 Monday, June 3, 2002 3:05 PM

3
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Setting up the monitor
Product Description
The IBM T750 Color Monitor works with a computer with a suitable on-board
sub-system or Video Adapter card that can support SXGA 1280 x 1024, XGA
1024 x 768, SVGA 800 x 600, or VGA 640 x 480 at 60 Hz.
In addition to your monitor, your option package includes the followings:
• User's Guide and Installation Files CD
• Monitor Warranty and Safety manual
• T750 Color Monitor Quick Setup Guide
• Power Cord
• AC Adapter
• T750 Color Monitor
• Analog Interface Cable - Attached to Monitor
Handling Instructions
Do not support the monitor
within the screen area. The
Liquid Crystal Display is
glass and can be damaged
by rough handling or
excessive pressure.
1. Lift the monitor by placing your hands where indicated below.
2. Before using your monitor for the first time, remove the clear protective
film from the front of the screen.
T750_E.fm Page 3 Monday, June 3, 2002 3:05 PM

4
Workplace Preparation
This section gives advice
on what you should
consider before you set up your
monitor.
Height
Position the monitor so that the top of the screen is slightly below your eye
level when you sit at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows,
usually at a right angle to any windows. Position the monitor directly in front of
you so that you do not have to twist your body to use it. Tilt the monitor to a
comfortable viewing angle.
Adjusting the Monitor Position
Viewing Angle
You can tilt the screen backward and forward and swivel left or right as shown
below.
Working Practices
This section gives
advice on how you can
work comfortably and reduce
fatigue.
Rest
Take regular breaks. Vary your posture, stand up and stretch occasionally as
prolonged use of computer workstations can be tiring.
T750_E.fm Page 4 Monday, June 3, 2002 3:05 PM

5
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Back
Sit back in your chair and use the backrest.
Hands
Adjust the seat height so that your forearms are approximately horizontal and
your wrists are straight when using the keyboard. Your upper arms should be
relaxed with your elbows near your body.
Use a light touch on the keyboard, keeping your hands and fingers relaxed.
Allow a space in front of the keyboard to rest your wrists when not typing.
Consider using a wristpad.
Eyesight
Working with monitors, in common with any prolonged close work, can be
visually demanding. Look away from the screen periodically and have your
eyesight checked regularly.
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have
to adjust this as the lighting changes during the day. Many application
programs let you select color combinations which can help you to view in
comfort. See the User controls section on page 18 for more information.
Caring for your Monitor
Be sure to turn off the power before you perform any maintenance on the
monitor. Clean your monitor as follows:
• Gently wipe the device covers and the screen with a soft cloth.
• Remove finger marks and grease with a damp cloth and mild detergent;
do not use solvents or abrasives
• Never use flammable cleaning material to clean your IBM monitor or any
other electrical apparatus.
T750_E.fm Page 5 Monday, June 3, 2002 3:05 PM

6
Connecting your Monitor for Analog
Be sure to read the ‘Safety
Information’ at the front of
this User Guide before
carrying out this procedure.
1. Turn off your computer and all attached devices.
2. Connect the signal cable to the video port on the back of your computer.
This port might be directly attached to your computer (figure A), or it
might be part of a video adapter card (figure B). The video port on your
computer or video adapter card might be colored blue to match the blue
connector on your monitor’s video cable.
The AC adapter and signal
cable are connected to your
monitor. If you wish to change
these or to fit a different stand, see
Further Help on page 29
3. Connect the power cord to the power adapter first, then insert the plug
into a properly grounded electrical outlet.
T750_E.fm Page 6 Monday, June 3, 2002 3:05 PM

7
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Connecting your Monitor for Digital
1. Purchase an industry standard DVI-D cable from your local computer
supply store.
2. Turn off your computer and all attached devices.
3. Tilt monitor all the way forward.
4. Squeeze the sides of the hinge cover (b) and pull it off. The cable cover
(a) will also come off.
5. Gently lift the stand cover (c) along the top and then slide it backwards
and off the stand.
6. Connect the DVI connector at the end of the signal cable to the DVI port
located on the back of the Monitor. See picture below.
Connecting DVI Cable
b
c
a
forward tilt
DVI
Cable
T750_E.fm Page 7 Monday, June 3, 2002 3:05 PM

8
7. Connect the DVI connector at the other end of the signal cable to the
DVI port located on the back of the graphics adapter. See picture below.
8. Replace the rear covers.
9. Connect the power cord to the power adapter first, then insert the plug
into a properly grounded electrical outlet.
10. Switch on the power source and your computer. To turn on the monitor,
push and release the power switch . To switch it off, push and release
the power switch again.
Switching on your Monitor
1. Switch on the power source and your computer.
2. Switch on your monitor by pushing and releasing the power switch
marked .
To switch off your monitor, push and release the power switch again.
3. Turn on the monitor and then the computer.
4. Run AUTO SETUP by following the instructions in the Device Driver
Installation section on page 9.
DVI
Signal Cable
graphics adapter
T750_E.fm Page 8 Monday, June 3, 2002 3:05 PM

9
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Device Driver Installation
Use the User's Guide and Installation Files CD that comes with your monitor
to install the appropriate device driver for your operating system.
Installing the Windows XP device driver
To manually install or update the device driver for the Microsoft Windows XP
operating system, perform the following steps:
1. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive.
2. Click Start Control Panel Appearance & Themes and then click
the Display icon.
3. In the Display Properties window, click the Settings tab, and then click
Advanced.
4. Click the Monitor tab, and then click Properties Driver tab Update
Driver.
5. When the Hardware Update Wizard window opens, select “Install the
software automatically,” click Next> and then Finish to complete the
installation.
6. Close the Display Properties window.
7. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows Me device driver
To manually install or update the device driver for the Microsoft Windows
Millennium Edition operating system, perform the following steps:
1. Click Start Settings Control Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab, and then click
Advanced.
3. Click the Monitor tab, and then click Change Specify the location of
the driver Next.
4. When the Update Device Driver Wizard window opens, select "Display
a list of all the drivers in a specific location, so you can select the driver
you want," and click Next>.
5. Insert the the User’s Guide and Installation Files CD into the computer
CD-ROM drive, then click Have Disk.
6. Type d:\ (change the drive letter to match your CD-ROM drive if it is not
drive D) in the Copy manufacturer's files from: box, then click OK.
T750_E.fm Page 9 Monday, June 3, 2002 3:05 PM

10
7. Click Next>, Next>, and then Finish to complete the installation.
8. Close the Display Properties window.
9. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows 2000 device driver
To manually install or update the device driver for the Microsoft Windows
2000 Professional operating system, perform the following steps:
1. Click Start Settings Control Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab, and then click
Advanced.
3. Click the Monitor tab, and then click Properties Driver Update
Driver.
4. When the Update Device Driver Wizard window opens, select "Search
for a suitable driver for my device," and click Next>.
5. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive, type d:\ (change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer's files from: box,
click Next> and then Finish to complete the installation.
6. Close the Display Properties window.
7. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows 98 device driver
Windows 98 automatically detects the new monitor and displays the Add New
Hardware Wizard window if the device driver is not already installed.
1. Insert the Device Driver and User’s Guide CD into the computer CD-
ROM drive, and click Next> twice when the Add New Hardware Wizard
window opens.
2. Click the CD-ROM drive box to install the device drivers from the CD
and then click Next>.
3. Confirm that the device driver was found on the CD, and click Next>
twice to install the device driver.
4. Click Finish to close the Add New Hardware Wizard window.
To manually install or update the device driver for the Microsoft Windows 98
operating system, perform the following steps:
T750_E.fm Page 10 Monday, June 3, 2002 3:05 PM

11
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
1. Click Start Settings Control Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab, and then click
Advanced.
3. Click the Monitor tab, and then click Change.
4. When the Update Device Driver Wizard window opens, follow the steps
in the previous paragraph.
5. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
Installing the Windows 95 device driver
Right-click the My Computer icon on the computer desktop and then select
Properties System to view the version number listed in the System
window. Perform the steps below for the appropriate version.
If you have Windows 95 Version 4.00.950A, use the following steps to
manually install or update the device driver:
1. Click Start Settings Control Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab and then click
Change Display Type.
3. In the Change Display Type window, click Change and then click Have
Disk.
4. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive, type d:\ (change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer's files from: box,
and click OK.
5. In the Select Device window, click the appropriate monitor model and
then click OK.
6. In the Change Display Type window, click Close.
7. In the Display Properties window, click OK.
8. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
If you have Windows 95 Version 4.00.950B, use the following steps to
manually install or update the device driver:
1. Click Start Settings Control Panel and then double-click Display.
2. In the Display Properties window, click the Settings tab and then click
Advanced Properties.
3. In the Advanced Display Properties window, click the Monitor tab and
then click Change.
T750_E.fm Page 11 Monday, June 3, 2002 3:05 PM

12
4. In the Select Device window, click Have Disk.
5. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive, type d:\ (change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer's files from: box,
and click OK.
6. In the Select Device window, click the appropriate monitor model and
then click OK.
7. In the Advanced Display Properties window, click Close.
8. In the Display Properties window, click OK.
9. Remove the User’s Guide and Installation Files CD from the computer
CD-ROM drive.
T750_E.fm Page 12 Monday, June 3, 2002 3:05 PM

13
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Auto Setup (Analog Only)
Auto Setup
The Setup Utility
included on the setup
diskette is for displaying dot
patterns. They do not replace or
modify the display dirver.
The Auto Setup instructions
require the monitor to be
warmed up for 15 minutes. This
is not required for normal
operation.
By pressing the
 and 
keys simultaneously allows
direct access to the auto set-up
controls.
When you first use your monitor you must perform Auto Setup. This
procedure sets up your monitor to process the video signals from your
computer without image discoloration or smearing. After you perform Auto
Setup, the settings are stored and used each time you turn on the monitor.
To optimise the displayed image a set-up utility is provided on the CD.
Operation of the utility is dependent on the operating system on your
computer. For correct operation locate the operating system on your
computer from the table below and follow the appropriate instructions. You
can choose to run AUTO SETUP for each operating system that you use. This
means that if you sometimes use your monitor while running any version of
Windows and sometimes also use it from within DOS (not a DOS window),
you must run AUTO SETUP for both Windows and DOS. You can run versions of
AUTO SETUP in any order.
Before you begin AUTO SETUP for your computer:
1. Make sure the computer’s video mode is set in the range of the
supported screen resolution shown in the Table on page 24.
The AUTO SETUP process
only applies to the current
screen mode. When a new
mode is selected, repeat this
section to reset the monitor
You should perform AUTO SETUP for each screen mode you use.
Operating System Corresponding Auto Setup procedure
DOS Auto Setup for DOS on page 14
Windows 3.1, Windows 95,
Windows 98, Windows 2000,
Windows NT, Windows Me or
Windows XP
Auto Setup for Windows 3.1, Windows 95,
Windows 98, Windows NT, Windows 2000,
Windows Me or Windows XP on page 15
T750_E.fm Page 13 Monday, June 3, 2002 3:05 PM

14
Auto Setup for DOS
If the monitor is in standby
mode (STANDBY ON), it
may automatically turn off while
you are waiting for it to warm up.
If this happens, switch off the
monitor and switch it on again
after a few seconds.
1. Turn on the monitor first; then turn on the computer.
If the message CHECK SIGNAL CABLE is displayed, or if nothing is
displayed, check:
• that the video interface cable is connected properly.
• the correct video adapter card is installed.
• the correct supported display mode is selected for your computer.
If you are using PC-DOS/
V, change to U.S. mode by
typing ‘CHEV US’ and pressing
ENTER at the command
prompt.
2. Wait approximately 15 minutes, until the monitor warms up.
3. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive.
4. Display the command prompt screen of the DOS full-screen display.
5. Type d:\ (change the drive letter to match your CD-ROM drive if it is not
drive D).
6. Type TESTPATD and press ENTER.
7. Select from the screen the number for the color or text mode you want to
set up.
8. Select from the screen the number for the video mode you want to set
up. You can repeat this process for as many of the color and video
modes as you need.
The size and diversity of
the dot pattern varies with
the screen resolution.
9. When the dot pattern appears, press the OSD Enter button at the
bottom of the monitor to display the initial OSD menu.
10. Use an Arrow button ( or ) to select the IMAGE LOCK icon
then press the OSD Enter button to access the function.
11. Using an Arrow button ( or ), select AUTOMATIC and press the
OSD Enter button . This activates the AUTO SETUP procedure, which
will optimize the display settings with the provided dot-patterns.
The screen will flash off several times and you might notice small
changes to the test pattern.
12. When finished, the OSD main menu returns. Press the Exit button
to exit from the OSD.
13. Press the ESCAPE key to exit the test pattern program.
14. Type Exit at the command prompt to return to Windows.
If you use other operating systems, perform the appropriate Auto Setup for
those systems using instructions given in "Auto Setup for Windows 3.1,
Windows 95, Windows 98, Windows NT, Windows 2000, Windows Me or
Windows XP on page 15”.
T750_E.fm Page 14 Monday, June 3, 2002 3:05 PM

15
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Auto Setup for Windows 3.1, Windows 95, Windows 98, Windows NT,
Windows 2000, Windows Me or Windows XP
If the monitor is in standby
mode (STANDBY ON), it
may automatically turn off while
you are waiting for it to warm up.
1. Turn on the monitor first; then the computer.
If the message CHECK SIGNAL CABLE is displayed, or if nothing is
displayed, check:
• that the video interface cable is connected properly.
• the correct video adapter card is installed.
• the correct supported display mode is selected for your computer.
2. Wait approximately 15 minutes, until the monitor warms up.
3. Drag the icon bar and tool bar, if they are displayed, to the bottom of the
screen.
4. Insert the User’s Guide and Installation Files CD into the computer CD-
ROM drive.
The size and diversity of
the dot pattern varies with
the screen resolution.
5. Check the operating system installed on your computer and follow the
instructions from the table below.
Operating system installation steps
6. When the test pattern appears, press the OSD Enter button at the
bottom of the monitor to display the initial OSD menu.
Position the mouse pointer
at the bottom center of the
screen. This allows AUTO
SETUP to run properly
7. Use an Arrow button ( or ) to select the IMAGE LOCK icon
and press the OSD Enter button to access the function.
8. Using an Arrow button ( or ), select AUTOMATIC and press the
OSD Enter button . This activates the AUTO SETUP procedure, which
will optimize the display settings with the provided test pattern.
The screen will dim, blink on and off several times, and you might notice
small changes to the test pattern.
To abort the AUTO SETUP function, press the ESC key.
Operating
System Step1 Step2 Step3 Step4
Windows 3.1 Open
PROGRAM
MANAGER
Select
FILE
Select
RUN
Type
D:\TESTPAT
(change the
drive letter to
match your CD-
ROM drive if it
is not drive D)
and press
ENTER
Windows NT 3.5
Windows 95,
Windows 98,
Windows 2000,
Windows NT,
Windows Me or
Windows XP
Select
START Select RUN
T750_E.fm Page 15 Monday, June 3, 2002 3:05 PM

16
9. When finished, the OSD main menu returns. Press the Exit button
once to exit from the OSD.
10. Press the ESC key to return to Windows.
You have completed the monitor setup for Windows. If you are using the DOS
operating system, go to Auto Setup for DOS on page 14.
T750_E.fm Page 16 Monday, June 3, 2002 3:05 PM

17
DEUTSCH ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Manual Setup
Normally, you can complete the setup procedure using AUTO SETUP; however,
if your screen image is still distorted after you perform AUTO SETUP or the
Installation CD does not run on your system, perform MANUAL SETUP.
If the monitor is in standby
mode (STANDBY ON), it
might automatically turn off
while you are waiting for it to
warm up.
1. Have your monitor turned on for about 15 minutes, until the monitor
warms up.
2. Display the image you most frequently use on the screen.
3. Press the OSD Enter button at the bottom of the monitor to display
the initial OSD menu.
4. Use an Arrow button ( or ) to select the IMAGE LOCK icon
and press the OSD Enter button to access the function.
5. Using an Arrow button ( or ), select MANUAL, press and then
press once to select COARSE. Left and right arrow adjustment
indicators become illuminated (see page 21).
6. Use the Arrow buttons to manually adjust to correct (as much as
possible) for noise in the video signal then press to save the
changes.
7. Use an Arrow button to select FINE and press the button.
8. Use the Arrow buttons again to tune the image to your liking.
9. When finished, press the Exit button four times to exit from the
OSD.
You have completed the monitor setup.
T750_E.fm Page 17 Monday, June 3, 2002 3:05 PM

18
Adjusting Your LCD Monitor
User controls
User control features
Operation
The image is already
optimized for many display
modes; however the user
controls can be used to adjust
the image to your liking.
• Press the OSD Enter button to display the main OSD menu.
Icon Control Description OSD
Input Change Switches the video input source. Inactive
Exit Exits from menus and sub-menus
Exits the OSD. Active
Auto Setup Activates automatic setup and
adjustment. Inactive
Left Arrow Moves the cursor to highlight icons
and other options. Active
Brightness Directly accesses to Brightness on the
OSD main menu. Inactive
Right Arrow Moves the cursor to highlight icons
and other options. Active
OSD Enter
Displays the OSD main menu.
Enters menus and sub-menus and
selects the highlighted option.
Inctive
Active
Power Switch Switches the monitor on and off. -
T750_E.fm Page 18 Monday, June 3, 2002 3:19 PM