IBM S822LC User manual

IBM
Power System S822LC for
Big Data (8001-22C) Quick
Install
Guide IBM
IBM Power®System S822LC for Big Data (8001-22C) Quick
Install Guide
The IBM Knowledge Center is available online from: http://www.ibm.com/support/knowledgecenter/
POWER8/p8hdx/8001_22c_landing.htm.
vRead all precautions and instructions before you start working on key parts.
vUse normal electrostatic discharge (ESD) procedures when working on the system and parts. IBM
recommends wearing gloves and an anti-static wrist strap to avoid possible damage to the equipment.
8001-22C information: https://ibm.biz/8001-22CQR
8001-22C or 8005-22N parts
Use this information to find the field-replaceable unit (FRU) part number.
After you identify the part number of the part that you want to order, go to Advanced Part Exchange
Warranty Service. Registration is required. If you are not able to identify the part number, go to
Contacting IBM®service and support.

Rack final assembly
Table 1. Rack final assembly part numbers
Index number Part number
Units per
assembly Description
1 MCP-290-
00057-0N
1 Slide rail kit - contains left and right slide rails and
attaching screws
2 MCP-290-
00057-0N
1 Slide rail kit - contains left and right slide rails and
attaching screws
Figure 1. Rack final assembly
2

System parts
Figure 2. System parts
3

Table 2. System parts
Index
number Part number Units per assembly Description
1 1 Top cover assembly
2 Screws
2 MCP-310-82914-0B 1 CPU air baffle (8001-22C)
2 MCP-310-82908-0B 1 CPU air baffle (8005-22N)
3 SNK-P0053P-IB001 2 Heat sink kit (includes heat sink and thermal interface
material)
4 CPU-KIT-01EM062-
IB001
2 8 core 3.325 GHz system processor module kit (includes
system processor, tray, and vacuum pen) (8001-22C)
CPU-KIT-01EM063-
IB001
2 10 core 2.926 GHz system processor module kit (includes
system processor, tray, and vacuum pen) (8001-22C)
PP8-MP00UL010-
11C,
MCP-74Y4912-IB001,
and
MCP-01AF132-IB001
2 11 core 2.893 GHz system processor module kit (includes
system processor, tray, and vacuum pen)
Note: You must order all three part numbers to receive all of
the kit contents.
5 MTA9ASF51272PZ-
2G3B1
16 4 GB, 2400 MHz 1RX8 DDR4 RDIMM (Micron Technology,
Inc.)* (8001-22C)
5 MTA9ASF1G72PZ-
2G3B1
16 8 GB, 2400 MHz 1RX8 DDR4 RDIMM (Micron Technology,
Inc.)* (8001-22C)
5 MTA18ASF2G72PZ-
2G3B1
16 16 GB, 2400 MHz 1RX4 DDR4 RDIMM (Micron Technology,
Inc.)* (8001-22C)
5 MTA36ASF4G72PZ-
2G3A1
16 32 GB, 2400 MHz 2RX4 DDR4 RDIMM (Micron Technology,
Inc.)* (8001-22C)
5 M393A1G40DB0-
CPB
16 8 GB, 2133 MHz 1RX4 DDR4 RDIMM (Samsung Electronics
Co., Ltd.)* (8001-22C)
5 M393A2G40DB0-
CPB
16 16 GB, 2133 MHz 2RX4 DDR4 RDIMM (Samsung Electronics
Co., Ltd.)* (8001-22C)
5 M393A4K40BB0-CPB 16 32 GB, 2133 MHz 2RX4 DDR4 RDIMM (Samsung Electronics
Co., Ltd.)* (8001-22C)
5 HMA41GR7AFR4N-
TF
16 8 GB, 2133 MHz 1RX4 DDR4 RDIMM (SK hynix, Inc.)*
(8001-22C)
5 HMA42GR7AFR4N-
TF
16 16 GB, 2133 MHz 2RX4 DDR4 RDIMM (SK hynix, Inc.)*
(8001-22C)
5 HMA84GR7MFR4N-
TFT1
16 32 GB, 2133 MHz 2RX4 DDR4 RDIMM (SK hynix, Inc.)*
(8001-22C)
5 MEM-DR416L-CL03-
ER24,
MEM-DR416L-SL01-
ER21, or
MEM-DR416L-HL02-
ER21
16 16 GB, 2133 MHz 2RX4 DDR4 ISRDIMM (Super Micro
Computer, Inc.)*
5 MEM-DR432L-SL01-
ER21,
MEM-DR432L-CL01-
ER24,
MEM-DR432L-HL01-
ER21
16 32 GB, 2133 MHz 2RX4 DDR4 ISRDIMM (Super Micro
Computer, Inc.)*
4

Table 2. System parts (continued)
Index
number Part number Units per assembly Description
6 SSD-DM064-PHI 2 64 GB SATA drive on module (DOM) (8001-22C)
6 SSD-DM064-
SMCMVN1
2 64 GB SATA drive on module (DOM) (8005-22N)
6 SSD-DM128-
SMCMVN1
2 128 GB SATA drive on module (DOM) (8001-22C)
7 MBD-P8DTU-1U-
IB001,
MCP-74Y4912-IB001,
and
MCP-01AF132-IB001
1 System backplane kit (includes system backplane, tray, and
vacuum pen)
Note: You must order all three part numbers to receive all of
the kit contents.
8 10 Screws
9 FAN-0166L4 4 Fan
10 BPN-SAS3-826A 1 Disk drive backplane (supports 12 SAS or SATA drives)
BPN-SAS3-826EL1-
N4
1 Disk drive backplane (supports 8 SAS or SATA drives and 4
SAS, SATA, or NVMe drives) (8001-22C)
11 7 Screws
12 HDD-A2000-
ST2000NM003401
12 2 TB 3.5 inch SAS disk drive (8001-22C)
12 HDD-A4000-
ST4000NM003401 or
HDD-A4TB-
HUS726040AL5210
12 4 TB 3.5 inch SAS disk drive (8001-22C)
12 HDD-A6000-
ST6000NM003401
12 6 TB 3.5 inch SAS disk drive (8001-22C)
12 HDD-A8000-
ST8000NM0075
12 8 TB 3.5 inch SAS disk drive (8001-22C)
12 HDD-A4000-
ST4000NM0075
12 4 TB 3.5 inch self-encrypting SAS disk drive (8001-22C)
12 HDD-A8000-
ST8000NM0095
12 8 TB 3.5 inch self-encrypting SAS disk drive (8001-22C)
12 HDD-T2000-
ST2000NM002401
12 2 TB 3.5 inch SATA disk drive (8001-22C)
12 HDD-T4000-
ST4000NM002401
12 4 TB 3.5 inch SATA disk drive (8001-22C)
12 HDD-T6000-
ST6000NM002401
12 6 TB 3.5 inch SATA disk drive (8001-22C)
12 HDD-T8000-
ST8000NM0055
12 8 TB 3.5 inch SATA disk drive (8001-22C)
12 HDS-KIT-2A-1920-
IB001
12 1.9 TB small form factor SAS solid-state drive (1 drive write
per day) (8001-22C)
12 HDS-KIT-2A-3840-
IB001
12 3.8 TB small form factor SAS solid-state drive (1 drive write
per day) (8001-22C)
12 HDS-KIT-2T-160-
IB001
12 160 GB 2.5 inch small form factor SATA solid-state drive
(8001-22C)
12 HDS-KIT-2T-240-
IB001
12 240 GB 2.5 inch small form factor SATA solid-state drive
(8001-22C)
5

Table 2. System parts (continued)
Index
number Part number Units per assembly Description
12 HDS-KIT-2T-960-
IB001
12 960 GB 2.5 inch small form factor SATA solid-state drive
(8001-22C)
12 HDS-KIT-2T-1900-
IB001
12 1.9 TB 2.5 inch small form factor SATA solid-state drive
(8001-22C)
12 HDS-KIT-2T-3800-
IB001
12 3.8 TB 2.5 inch small form factor SATA solid-state drive
(8001-22C)
12 HDS-KIT-3N-800-
IB001
4 800 GB 2.5 inch small form factor NVMe drive (3 drive
writes per day) (8001-22C)
12 HDS-KIT-3N-1200-
IB001
4 1.2 TB 2.5 inch small form factor NVMe drive (3 drive writes
per day) (8001-22C)
12 HDS-KIT-3N-1600-
IB001
4 1.6 TB 2.5 inch small form factor NVMe drive (3 drive writes
per day) (8001-22C)
12 HDS-KIT-3N-2000-
IB001
4 2.0 TB 2.5 inch small form factor NVMe drive (3 drive writes
per day) (8001-22C)
12 HDS-KIT-5N-800-
IB001
4 800 GB 2.5 inch small form factor NVMe drive (5 drive
writes per day) (8001-22C)
12 HDS-KIT-5N-3200-
IB001
4 3.2 TB 2.5 inch small form factor NVMe drive (5 drive writes
per day) (8001-22C)
12 HDS-KIT-2T-480-
IB001
4 480 GB 2.5 inch SATA solid-state drive (3.5 drive writes per
day) (8005-22N)
12 HDS-KIT-2T-960S-
IB001
4 960 GB 2.5 inch SATA solid-state drive (3.5 drive writes per
day) (8005-22N)
12 HDS-KIT-2T-1920-
IB001
4 1.92 TB 2.5 inch SATA solid-state drive (3.5 drive writes per
day) (8005-22N)
13 PWS-1K62A-1R 2 Power supply
14 RSC-R1UW-E8R 1 PCIe riser for PCIe adapter 3 (PLX Slot1)
15 1 PCI adapter. Use the feature type of the adapter to find the
FRU number in PCIe adapter information by feature type for
the 8001-22C or 8005-22N.
16 1 GPU. Use the feature type of the GPU to find the FRU
number in PCIe adapter information by feature type for the
8001-22C or 8005-22N.
Note: 8005-22N systems do not support GPUs.
17 1 PCI adapter. Use the feature type of the adapter to find the
FRU number in PCIe adapter information by feature type for
the 8001-22C or 8005-22N.
Note: 8005-22N systems do not support this PCIe adapter.
18 AOC-2UR66-i4XTF 1 2U UIO NIC PCIe adapter with integrated 4-port 10 GbE
Base-T, Intel XL710, and CAPI
Note: This PCIe adapter is also a PCIe riser.
19 1 PCIe cage
20 1 GPU. Use the feature type of the GPU to find the FRU
number in PCIe adapter information by feature type for the
8001-22C or 8005-22N.
Note: 8005-22N systems do not support GPUs.
6

Table 2. System parts (continued)
Index
number Part number Units per assembly Description
21 3 PCIe adapters. Use the feature type of the adapter to find the
FRU number in PCIe adapter information by feature type for
the 8001-22C or 8005-22N.
Note: 8005-22N systems do not support this PCIe adapter.
22 1 PCIe riser
23 RSC-W2-688P 1 PCIe riser PCIe adapter 4 or GPU 2 (WIO Slot1), PCIe
adapter 5 (WIO Slot2), and PCIe adapter 6 (WIO Slot3)
Note: 8005-22N systems do not support GPUs.
24 1 PCI adapter. Use the feature type of the adapter to find the
FRU number in PCIe adapter information by feature type for
the 8001-22C or 8005-22N.
*All of the memory in a 8001-22C system must be the same size and from the same supplier. The
8001-22C system does not support mixing different sizes of memory or mixing memory from different
suppliers. All of the memory in a 8005-22N system must be the same size and from the same supplier.
The 8005-22N system does not support mixing different sizes of memory or mixing memory from
different suppliers.
Rear ports
Table 3. Input and output ports
Identifier Description
1 USB 2.0 used for keyboard and mouse.
Certain USB drives might be too wide to fit properly into
the USB ports on the rear of the system. Test the fit your
USB drive before proceeding.
2 Ethernet Intelligent Platform Management Interface
(IPMI)
3 Serial IPMI
Figure 3. Rear ports
7

Table 3. Input and output ports (continued)
Identifier Description
4 Video Graphics Array (VGA) used for monitor. Only the
1024 x 768 at 60 Hz VGA setting is supported. Only up
to a 3-meter cable is supported. Text based capability is
only supported at this time.
Installing and Removing
Figure 4. Removing a power supply from the system
Figure 5. Releasing and opening the cover
Figure 6. Removing a drive Figure 7. Removing the 3.5-inch drive from the tray
8

Figure 8. Removing the 2.5-inch drive from the tray Figure 9. Removing the disk drive backplane and screws
Figure 10. Removing the disk drive backplane cables
Figure 11. Removing a fan
9

Figure 12. Removing the memory DIMM
Figure 13. Memory slot locations and plugging sequence
Figure 14. 8001-22C PCIe adapter positions
Figure 15. Removing the PCIe riser
Figure 16. Removing a position 2 adapter from the riser
10

Figure 17. Removing a position 3 adapter from the riser
Figure 18. Removing position 1 riser card
Figure 19. Removing the PCIe riser Figure 20. Removing the GPU from the riser
Figure 21. Removing position 5, 6, 7, and 8 riser card
Figure 22. Releasing the tail-stock
11

Figure 23. Screw locations Figure 24. Lifting out the system backplane
Figure 25. Opening the system processor module
packaging
Figure 26. Loosening the load arm screw of the heat sink
12

Figure 27. Lifting the heat sink from the load arm
Figure 28. Locking the vacuum pen to the system
processor module
Figure 29. Placing the processor at an angle on the top
cover of the packaging Figure 30. Lowering the removal tool onto the system
processor module
13

Figure 31. Lowering the processor into the socket
Figure 32. Installing the heat sink
Figure 33. Tightening the load arm screw
14

Figure 34. Time-of-day battery location
This May 10, 2018 edition applies to IBM Power Systems servers that contain the POWER8 processor and to all
associated models.
© Copyright IBM Corporation 2015, 2017.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.