IBM Storwize V5000 User manual

IBM Storwize V5000
Quick Installation Guide
GI13-2861-00


Note
Before using this information and the product it supports, read the general information in “Notices” on page 37, the
information in the “Safety and environmental notices” on page ix, as well as the information in the IBM Environmental
Notices and User Guide , which is provided on a DVD.
This edition applies to IBM Storwize V5000 and is valid until replaced by new editions.
© Copyright IBM Corporation 2013.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
Figures ...............v
Tables ...............vii
Safety and environmental notices . . . ix
Safety notices and labels ..........ix
Caution notices for the Storwize V5000 ....x
Danger notices for Storwize V5000 .....xiii
Special caution and safety notices .......xv
General safety ............xv
Handling static-sensitive devices ......xvi
Power and cabling information for NEBS
(Network Equipment-Building System)
GR-1089-CORE............xvii
Environmental notices ..........xvii
About this guide ..........xix
Who should use this guide .........xix
Storwize V5000 library and related publications . . xix
How to order IBM publications .......xxi
Related websites ............xxi
Sending your comments..........xxii
How to get information, help, and technical
assistance ..............xxii
What's new..............xxiv
Chapter 1. Before you begin the
installation .............1
Reviewing your packing slip .........5
Identifying the hardware components ......6
Verifying environmental requirements .....10
Reviewing enclosure location guidelines .....10
Chapter 2. Installing the hardware . . . 11
Installing the support rails .........11
Installing the enclosures ..........16
Connecting SAS cables to expansion enclosures . . 17
Connecting Ethernet cables for system management 19
Connecting fibre cables to a 10 Gbps iSCSI-FCoE
2-port host interface card ..........19
Connecting Fibre Channel cables to an 8 Gbps Fibre
Channel 4-port host interface card .......21
Connecting SAS cables to a host .......22
Powering on the system ..........24
Chapter 3. Configuring the system. . . 27
Web browser requirements to access the
management GUI ............27
User name and password for system initialization 28
Initializing the system with a Microsoft Windows
computer ...............29
Initializing the system with an Apple Macintosh
computer ...............31
Initializing the system with a Linux computer . . . 33
Adding an expansion enclosure to an existing
system ................34
Adding a control enclosure to an existing system . . 34
Notices ..............37
Trademarks ..............39
Homologation statement ..........39
Electronic emission notices .........39
Federal Communications Commission (FCC)
statement ..............39
Industry Canada compliance statement ....40
Australia and New Zealand Class A Statement 40
European Union Electromagnetic Compatibility
Directive ..............40
Germany Electromagnetic Compatibility Directive 41
People's Republic of China Class A Statement . . 42
Taiwan Class A compliance statement ....42
Taiwan Contact Information ........42
Japan VCCI Council Class A statement ....42
Japan Electronics and Information Technology
Industries Association Statement ......42
Korean Communications Commission Class A
Statement ..............43
Russia Electromagnetic Interference Class A
Statement ..............43
Index ...............45
© Copyright IBM Corp. 2013 iii
|
|
||
|
|
||
|
||
|
||
||

iv Storwize V5000: Quick Installation Guide

Figures
1. Rear view of a Storwize V5000 control enclosure 6
2. Data ports in the rear of the control enclosure 7
3. Rear view of a Storwize V5000 expansion
enclosure..............8
4. SAS ports and LEDs in rear of expansion
canister ..............8
5. USB flash drive ...........8
6. Rack mounting rails and screws......11
7. Installing the rail spring ........12
8. Hole locations in the front of the rack....13
9. Opening the hinge brackets .......14
10. Closing hinge brackets and installing rear
screw ..............15
11. Inserting the enclosure .........16
12. SAS cable connectors .........17
13. Connecting the SAS cables .......18
14. Connecting the Ethernet cables ......19
15. Example configuration with two pairs of
Ethernet cables connected to 10 Gbps
iSCSI-FCoE 2-port host interface cards . . . 20
16. Example configuration with two Fibre Channel
cables per canister ..........21
17. Example configuration with four Fibre
Channel cables per canister .......21
18. Mini SAS HD to Mini SAS HD cable ....22
19. Mini SAS HD to Mini SAS cable .....22
20. Example configuration with two SAS cables
per canister ............23
21. Expansion canister LEDs ........24
22. Node canister LEDs ..........25
© Copyright IBM Corp. 2013 v
||
|
|
||
||
||
|
||

vi Storwize V5000: Quick Installation Guide

Tables
1. IBM websites for help, services, and
information ............xix
2. Storwize V5000 library .........xx
3. IBM documentation and related websites xxi
4. IBM websites for help, services, and
information ............xxii
5. Steps for different installation scenarios . . . 2
6. Storwize V5000 model numbers ......5
7. Default user name and password for the
management GUI ..........28
© Copyright IBM Corp. 2013 vii
||

viii Storwize V5000: Quick Installation Guide

Safety and environmental notices
Review the safety notices, environmental notices, and electronic emission notices
for IBM®Storwize®V5000 before you install and use the product.
Suitability for telecommunication environment: This product is not intended to
connect directly or indirectly by any means whatsoever to interfaces of public
telecommunications networks. See “Homologation statement” on page 39 for more
information.
Here are examples of a caution and a danger notice:
CAUTION:
A caution notice indicates the presence of a hazard that has the potential of
causing moderate or minor personal injury. (C001)
DANGER
A danger notice indicates the presence of a hazard that has the potential of
causing death or serious personal injury. (D002)
To find the translated text for a caution or danger notice:
1. Look for the identification number at the end of each caution notice or each
danger notice. In the preceding examples, the numbers (C001) and (D002) are
the identification numbers.
2. Locate IBM Systems Safety Notices with the user publications that were provided
with the Storwize V5000 hardware.
3. Find the matching identification number in the IBM Systems Safety Notices. Then
review the topics concerning the safety notices to ensure that you are in
compliance.
4. Optionally, read the multilingual safety instructions on the Storwize V5000
website. Go to www.ibm.com/storage/support/storwize/v5000 and click the
documentation link.
Safety notices and labels
Review the safety notices and safety information labels before using this product.
To view a PDF file, you need Adobe Acrobat Reader. You can download it at no
charge from the Adobe website:
www.adobe.com/support/downloads/main.html
IBM Systems Safety Notices
This publication contains the safety notices for the IBM Systems products in
English and other languages. Anyone who plans, installs, operates, or services the
system must be familiar with and understand the safety notices. Read the related
safety notices before you begin work.
© Copyright IBM Corp. 2013 ix
|
|

Note: The IBM Systems Safety Notices document is organized into two sections.
The danger and caution notices without labels are organized alphabetically by
language in the “Danger and caution notices by language” section. The danger and
caution notices that are accompanied with a label are organized by label reference
number in the “Labels” section.
The following notices and statements are used in IBM documents. They are listed
in order of decreasing severity of potential hazards.
Danger notice definition
A special note that emphasize a situation that is potentially lethal or
extremely hazardous to people.
Caution notice definition
A special note that emphasize a situation that is potentially hazardous to
people because of some existing condition, or to a potentially dangerous
situation that might develop because of some unsafe practice.
Note: In addition to these notices, labels might be attached to the product to warn
of potential hazards.
Finding translated notices
Each safety notice contains an identification number. You can use this identification
number to check the safety notice in each language.
To find the translated text for a caution or danger notice:
1. In the product documentation, look for the identification number at the end of
each caution notice or each danger notice. In the following examples, the
numbers (D002) and (C001) are the identification numbers.
DANGER
A danger notice indicates the presence of a hazard that has the potential
of causing death or serious personal injury. (D002)
CAUTION:
A caution notice indicates the presence of a hazard that has the potential of
causing moderate or minor personal injury. (C001)
2. Open the IBM Systems Safety Notices.
3. Under the language, find the matching identification number. Review the topics
about the safety notices to ensure that you are in compliance.
Note: This product was designed, tested, and manufactured to comply with IEC
60950-1, and where required, to relevant national standards that are based on IEC
60950-1.
Caution notices for the Storwize V5000
Ensure that you understand the caution notices for Storwize V5000.
Use the reference numbers in parentheses at the end of each notice, such as (C003)
for example, to find the matching translated notice in IBM Systems Safety Notices.
xStorwize V5000: Quick Installation Guide

CAUTION:
The battery contains lithium. To avoid possible explosion, do not burn or charge
the battery.
Do not: Throw or immerse into water, heat to more than 100°C (212°F), repair or
disassemble. (C003)
CAUTION:
Use safe practices when lifting.
svc00146
18-32 kg (39.7-70.5 lbs) 32-55 kg (70.5-121.2 lbs) 55 kg ( 121.2 lbs)
(27)
Safety and environmental notices xi

CAUTION:
Removing components from the upper positions in the rack cabinet improves
rack stability during a relocation. Follow these general guidelines whenever you
relocate a populated rack cabinet within a room or building.
vReduce the weight of the rack cabinet by removing equipment starting at the
top of the rack cabinet. When possible, restore the rack cabinet to the
configuration of the rack cabinet as you received it. If this configuration is not
known, you must observe the following precautions.
– Remove all devices in the 32U position and above.
– Ensure that the heaviest devices are installed in the bottom of the rack
cabinet.
– Ensure that there are no empty U-levels between devices installed in the
rack cabinet below the 32U level.
vIf the rack cabinet you are relocating is part of a suite of rack cabinets, detach
the rack cabinet from the suite.
vIf the rack cabinet you are relocating was supplied with removable outriggers
they must be reinstalled before the cabinet is relocated.
vInspect the route that you plan to take to eliminate potential hazards.
vVerify that the route that you choose can support the weight of the loaded
rack cabinet. Refer to the documentation that comes with your rack cabinet for
the weight of a loaded rack cabinet.
vVerify that all door openings are at least 760 x 230 mm (30 x 80 in.).
vEnsure that all devices, shelves, drawers, doors, and cables are secure.
vEnsure that the four leveling pads are raised to their highest position.
vEnsure that there is no stabilizer bracket installed on the rack cabinet during
movement.
vDo not use a ramp inclined at more than 10 degrees.
vWhen the rack cabinet is in the new location, complete the following steps:
– Lower the four leveling pads.
– Install stabilizer brackets on the rack cabinet.
– If you removed any devices from the rack cabinet, repopulate the rack
cabinet from the lowest position to the highest position.
vIf a long-distance relocation is required, restore the rack cabinet to the
configuration of the rack cabinet as you received it. Pack the rack cabinet in
the original packaging material, or equivalent. Also lower the leveling pads to
raise the casters off the pallet and bolt the rack cabinet to the pallet.
(R002)
CAUTION:
vRack is not intended to serve as an enclosure and does not provide any
degrees of protection required of enclosures.
vIt is intended that equipment installed within this rack will have its own
enclosure. (R005).
CAUTION:
Tighten the stabilizer brackets until they are flush against the rack. (R006)
CAUTION:
Use safe practices when lifting. (R007)
xii Storwize V5000: Quick Installation Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

CAUTION:
Do not place any object on top of a rack-mounted device unless that
rack-mounted device is intended for use as a shelf. (R008)
CAUTION:
If the rack is designed to be coupled to another rack only the same model rack
should be coupled together with another same model rack. (R009)
Danger notices for Storwize V5000
Ensure that you are familiar with the danger notices for Storwize V5000.
Use the reference numbers in parentheses at the end of each notice, such as (C003)
for example, to find the matching translated notice in IBM Systems Safety Notices.
Safety and environmental notices xiii
|
|
|
|

DANGER
When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication
cables are hazardous. To avoid a shock hazard:
vIf IBM supplied a power cord(s), connect power to this unit only with the
IBM provided power cord. Do not use the IBM provided power cord for
any other product.
vDo not open or service any power supply assembly.
vDo not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical storm.
vThe product might be equipped with multiple power cords. To remove all
hazardous voltages, disconnect all power cords.
vConnect all power cords to a properly wired and grounded electrical outlet.
Ensure that the outlet supplies proper voltage and phase rotation according
to the system rating plate.
vConnect any equipment that will be attached to this product to properly
wired outlets.
vWhen possible, use one hand only to connect or disconnect signal cables.
vNever turn on any equipment when there is evidence of fire, water, or
structural damage.
vDisconnect the attached power cords, telecommunications systems,
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.
vConnect and disconnect cables as described in the following procedures
when installing, moving, or opening covers on this product or attached
devices.
To disconnect:
1. Turn off everything (unless instructed otherwise).
2. Remove the power cords from the outlets.
3. Remove the signal cables from the connectors.
4. Remove all cables from the devices.
To connect:
1. Turn off everything (unless instructed otherwise).
2. Attach all cables to the devices.
3. Attach the signal cables to the connectors.
4. Attach the power cords to the outlets.
5. Turn on the devices.
vSharp edges, corners and joints may be present in and around the system.
Use care when handling equipment to avoid cuts, scrapes and pinching.
(D005)
DANGER
Heavy equipment–personal injury or equipment damage might result if
mishandled. (D006)
DANGER
xiv Storwize V5000: Quick Installation Guide

Racks with a total weight of > 227 kg (500 lb.), Use Only Professional Movers!
(R003)
DANGER
Do not transport the rack via fork truck unless it is properly packaged,
secured on top of the supplied pallet. (R004)
DANGER
Main Protective Earth (Ground):
This symbol is marked on the frame of the rack.
The PROTECTIVE EARTHING CONDUCTORS should be terminated at that
point. A recognized or certified closed loop connector (ring terminal) should
be used and secured to the frame with a lock washer using a bolt or stud.
The connector should be properly sized to be suitable for the bold or stud,
the locking washer, the rating for the conducting wire used, and the
considered rating of the breaker. The intent is to ensure the frame is
electrically bonded to the PROTECTIVE EARTHING CONDUCTORS. The
hole that the bolt or stud goes into where the terminal conductor and the lock
washer contact should be free of any non-conductive material to allow for
metal to metal contact. All PROTECTIVE EARTHING CONDUCTORS
should terminate at this main protective earthing terminal or at points
marked with . (R010)
Special caution and safety notices
This information describes special safety notices that apply to the Storwize V5000.
These notices are in addition to the standard safety notices supplied and address
specific issues relevant to the equipment provided.
General safety
When you service the Storwize V5000, follow general safety guidelines.
Use the following general rules to ensure safety to yourself and others:
vObserve good housekeeping in the area where the devices are kept during and
after maintenance.
vFollow the guidelines when lifting any heavy object:
1. Ensure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt to
lift.
4. Lift by standing or by pushing up with your leg muscles; this action removes
the strain from the muscles in your back. Do not attempt to lift any objects that
weigh more than 18 kg (40 lb) or objects that you think are too heavy for you.
Safety and environmental notices xv
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

vDo not perform any action that causes a hazard or that makes the equipment
unsafe.
vBefore you start the device, ensure that other personnel are not in a hazardous
position.
vPlace removed covers and other parts in a safe place, away from all personnel,
while you are servicing the unit.
vKeep your tool case away from walk areas so that other people will not trip over
it.
vDo not wear loose clothing that can be trapped in the moving parts of a device.
Ensure that your sleeves are fastened or rolled up above your elbows. If your
hair is long, fasten it.
vInsert the ends of your necktie or scarf inside clothing or fasten it with a
nonconducting clip, approximately 8 cm (3 in.) from the end.
vDo not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your
clothing.
Remember: Metal objects are good electrical conductors.
vWear safety glasses when you are: hammering, drilling, soldering, cutting wire,
attaching springs, using solvents, or working in any other conditions that might
be hazardous to your eyes.
vAfter service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
vReinstall all covers correctly after you have finished servicing the unit.
Handling static-sensitive devices
Ensure that you understand how to handle devices that are sensitive to static
electricity.
Attention: Static electricity can damage electronic devices and your system. To
avoid damage, keep static-sensitive devices in their static-protective bags until you
are ready to install them.
To reduce the possibility of electrostatic discharge, observe the following
precautions:
vLimit your movement. Movement can cause static electricity to build up around
you.
vHandle the device carefully, holding it by its edges or frame.
vDo not touch solder joints, pins, or exposed printed circuitry.
vDo not leave the device where others can handle and possibly damage the
device.
vWhile the device is still in its antistatic bag, touch it to an unpainted metal part
of the system unit for at least two seconds. (This action removes static electricity
from the package and from your body.)
vRemove the device from its package and install it directly into your Storwize
V5000, without putting it down. If it is necessary to put the device down, place
it onto its static-protective bag. (If your device is an adapter, place it
component-side up.) Do not place the device onto the cover of the Storwize
V5000 or onto a metal table.
vTake additional care when you handle devices during cold weather because
heating reduces indoor humidity and increases static electricity.
xvi Storwize V5000: Quick Installation Guide

Power and cabling information for NEBS (Network
Equipment-Building System) GR-1089-CORE
The following comments apply to IBM storage devices that have been designated
as conforming to NEBS (Network Equipment-Building System) GR-1089-CORE.
The equipment is suitable for installation at:
vNetwork telecommunications facilities
vLocations where the NEC (National Electrical Code) applies
Note:
vThis product is not intended to connect directly or indirectly by any means
whatsoever to interfaces of public telecommunications networks.
vThe ac-powered system does not require the use of an external surge protection
device (SPD).
vThe dc-powered system employs an isolated DC return (DC-I) design. The DC
battery return terminal shall not be connected to the chassis or frame ground.
vThe storage device (dc power) is intended to be installed in a Common Bonding
Network (or mesh network) as described in GR-1089-CORE, Issue 5 or latest
revision.
Environmental notices
This publication contains all the required environmental notices for IBM Systems
products in English and other languages.
The IBM Systems Environmental Notices and User Guide (ftp://
public.dhe.ibm.com/systems/support/warranty/envnotices/
environmental_notices_and_user_guide.pdf), Z125-5823 document includes
statements on limitations, product information, product recycling and disposal,
battery information, flat panel display, refrigeration, and water-cooling systems,
external power supplies, and safety data sheets.
To view a PDF file, you need Adobe Reader. You can download it at no charge
from the Adobe web site (get.adobe.com/reader/).
Safety and environmental notices xvii
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

xviii Storwize V5000: Quick Installation Guide

About this guide
This publication provides information that helps you install and initialize IBM
Storwize V5000.
Who should use this guide
This guide is intended for installers of Storwize V5000.
Before configuring your system, ensure that you follow the procedures as listed. Be
sure to gather IP addresses that you will need before you begin the installation.
Storwize V5000 library and related publications
Product manuals, other publications, and websites contain information that relates
to Storwize V5000.
Storwize V5000 Information Center
The IBM Storwize V5000 Information Center contains all of the information that is
required to install, configure, and manage the Storwize V5000. The information
center is updated between Storwize V5000 product releases to provide the most
current documentation. The information center is available at the following
website:
http://pic.dhe.ibm.com/infocenter/storwize/v5000_ic/index.jsp
Storwize V5000 library
Unless otherwise noted, the publications in the Storwize V5000 library are
available in Adobe portable document format (PDF) from the following website:
www.ibm.com/e-business/linkweb/publications/servlet/pbi.wss
The following table lists websites where you can find help, services, and more
information:
Table 1. IBM websites for help, services, and information
Website Address
Directory of worldwide contacts http://www.ibm.com/planetwide
Support for Storwize V5000 (2077
or 2078)
www.ibm.com/storage/support/storwize/v5000
Support for IBM System Storage®
and IBM TotalStorage products
www.ibm.com/storage/support/
Each of the PDF publications in the Table 2 on page xx is also available in the
information center by clicking the number in the “Order number” column:
© Copyright IBM Corp. 2013 xix

Table 2. Storwize V5000 library
Title Description Order number
IBM Storwize V5000 Quick
Installation Guide
This guide provides
instructions for unpacking
your shipping order and
installing your system. The
first of three chapters
describes verifying your
order, becoming familiar
with the hardware
components, and meeting
environmental requirements.
The second chapter describes
installing the hardware and
attaching data cables and
power cords. The last
chapter describes accessing
the management GUI to
initially configure your
system.
GC27-4219
IBM Systems Safety Notices This guide contains
translated caution and
danger statements. Each
caution and danger
statement in the Storwize
V5000 documentation has a
number that you can use to
locate the corresponding
statement in your language
in the IBM Systems Safety
Notices document.
G229-9054
IBM Storwize V5000 Read
First Flyer
This document introduces
the major components of the
Storwize V5000 system and
describes how to get started
with the IBM Storwize V5000
Quick Installation Guide.
Part number: 00Y2619
IBM Statement of Limited
Warranty (2078)
This multilingual document
provides information about
the IBM warranty for
machine type 2078.
Part number: 00Y2617
IBM License Agreement for
Machine Code
This multilingual guide
contains the License
Agreement for Machine
Code for the Storwize V5000
product.
SC28-6872 (contains
Z125-5468)
IBM documentation and related websites
Table 3 on page xxi lists websites that provide publications and other information
about the Storwize V5000 or related products or technologies.
xx Storwize V5000: Quick Installation Guide
|
|
|
|