Icom MR-1010RII User manual

MR-1010R OPERATING GUIDE
Fixed ring range readout
Screen range readout
Reference indicator
Trail indicator
Vector indicator
Rain control icon
SEA icon
AIS icon*2
Long pulse icon
North mark
Cross-line cursor
Fixed range rings
EBL/ VRM1
readouts
Own ship
information*3, *4Cursor
information*5, *6
Target Information box*5, *6
EBL/ VRM2
readouts
EBL1 line
ARPAicon*4,5
EBL2 line
VRM1 marker
VRM2 marker
Own ship vector
indicator
Waypoint marker
Heading line
Echo Stretch icon
Zoom icon
IR icon
Alarm icons
Tuning mode
indicator
Mode indicator*1Heading indicator*7, *8
Alarm zone
■Display information
*1North-up and Course-up screens can be used only when a bearing input (NMEA, N+1 or AUX) is connected.
*2AIS data is required.
*3Your position data is required.
*4GPS data is required.
COG (Course Over Ground), SOG (Speed Over Ground)
*5Bearing data and position data are required.
*6R: Relative bearing, T:True bearing, M: Magnetic bearing
*7 T: True bearing, M: Magnetic bearing
*8COG (Course Over Ground) is displayed when the “Bearing Input” item in the Initial menu is set to “GPS” or “GPS-L.”
When using COG instead of HDG, the heading indicator may differ from the vessel’s actual bow direction.
Refer to the Instruction Manual for details about the ARPA, the AIS receiver, and DSC functions,
© 2017 Icom Inc. A7361-5EX

to enter the Menu screen.
/
/
qPush
to exit the Menu screen.uPush
to enter the option selection mode.
rPush
to save the setting and exit the option
selection mode.
yPush
to select the menu.wPush
to select an item.ePush
to select an option.tPush
Item
Item
■MENU list
■MENU screen operation
Color
Echo Color Steps
Heading Line Brill
Ring Brill
ARPA/AIS Brill
EBL/VRM/PI Brill
Other symbol Brill
Character Brill
Day Color Setting
Night Color Setting
User Color Setting
Trail
Reset
Reference
Time
Color
Level
Display
Own Vector
PPI Area
AUTO Hide Information
WPT Display
Mark Display
DSC Display
Cursor Information
Target
Vector Mode
Vector Time
Track Interval
CPA Limit
TCPA Limit
CPA/TCPAAlarm
ARPA
Function
Auto Acquire
Track
No. Display
All Clear Target
AIS
Display
Track
Name Display
Auto Activate
Auto Activate - Distance
Auto Activate - Angle
New Target Warning
Display Range
Number of AIS
Slow Warn
Slow Warn Speed
Erase Lost Target
Safety Message
Favorite AIS
Favorite AIS Range
Favorite AIS Target 1/2/3
System
Key Beep
Sync Backlight
HL OFF Mode
Zone Alarm 1/2
Zone Alarm Level
OFF Center Mode
Save Time
Bearing Mode
Variation
Manual Variation
Bearing Reference
Speed Input
Manual Speed
Manual SET
Manual Drift
TLL Mode
STBY Mode
Rev.
Video
TUNE
Manual Tune
Dynamic Range
IR
Echo Stretch
Pulse Width
SEA Curve
Antenna Height
Initial
Distance Unit
Speed Unit
Date Display
Language
Bearing Input
TX Inhibit
TX Inhibit Start
TX Inhibit Angle
Timing Adjust
Heading Adjust
Antenna Rotation Speed
Range Ring
Range
Save Settings 1/2/3
Load Settings 1/2/3
Setting Reset
Factory Reset
AIS Own
Status
Port Monitor
NMEA1 RX
NMEA2 RX
NMEA2 TX
AIS RX
DSC RX
Scanner Monitor