Icop VEX2-6454 User manual

ICOP Technology Inc.
User Manual
VEX2-6454
with
DM&P Vortex86EX2
600MHz processor
Version 1.0

VEX2-6454 User Manual
ICOP Technology Inc. I
Copyright
The information in this manual is subject to change without notice for
continues improvement in the product. All rights are reserved. The manufacturer
assumes no reasonability for any inaccuracies that may be contained in this
document and makes no commitment to update or to keep current the
information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted,
in whole or in part, in any form or by any means without the prior to written
permission of ICOP Technology Inc.
Copyright ⓒ 2019 ICOP Technology Inc
Trademarks Acknowledgement
Vortex86EX2TM is the registered trademark of DM&P Electronics Inc.
Other brand names and product names that appear in this document are the
properties and registered trademarks of their respective owners. All names
mentioned herewith are served for identification purpose only.

VEX2-6454 User Manual
ICOP Technology Inc. II
Revision History
Revision Date Remark
1.0 August, 2019 First version release

VEX2-6454 User Manual
ICOP Technology Inc. III
Table of Contents
Copyright ...................................................................................................................... I
Trademarks Acknowledgement ................................................................................ I
Revision History ......................................................................................................... II
Table of Contents ..................................................................................................... III
1 General Information ........................................................................................... 1
1.1 Overview .................................................................................................................................... 1
1.2 Block diagram ............................................................................................................................. 3
1.3 Specifications .............................................................................................................................. 5
1.4 Ordering Information ................................................................................................................. 7
2 Hardware Information ....................................................................................... 8
2.1 Dimension .................................................................................................................................. 8
2.2 Board Outline ............................................................................................................................. 9
VEX2-6454-2C4IEE/VEX2-6454-2C4INE .................................................................................... 9
VEX2-6454-4C4EE/VEX2-6454-4C4NE ....................................................................................... 9
VEX2-6450-2C3INE ..................................................................................................................... 10
2.3 Connector Location .................................................................................................................. 11
2.4 Connector and Jumper Summary .............................................................................................. 12
2.5 Pin Assignments & Jumper Settings .......................................................................................... 13
J2: LAN ......................................................................................................................................... 13
J3: USB .......................................................................................................................................... 13
J4: Mini PCIe ................................................................................................................................. 14
J5: VGA ......................................................................................................................................... 15
J6: 18-bit/24-bit LCD .................................................................................................................... 15
J7: LVDS ....................................................................................................................................... 16

VEX2-6454 User Manual
ICOP Technology Inc. IV
J8: Resistive Touch Screen (Option) ............................................................................................... 17
J9: Buzzer ....................................................................................................................................... 17
J10: PS/2 KBD (For VEX2-6454-4C4NE/VEX2-6454-4C4EE) ................................................... 17
J11: PS/2 Mouse (For VEX2-6454-4C4NE/VEX2-6454-4C4EE) ................................................. 17
J12: COM1 RS232/485 .................................................................................................................. 17
J13: RS232/485 Jumper Switch for COM1 ..................................................................................... 18
J14: COM2 RS232/485 .................................................................................................................. 18
J15: RS232/485 Jumper Switch for COM2 ..................................................................................... 18
J16: COM3 RS232 (For VEX2-6454-4C4NE/VEX2-6454-4C4EE) .............................................. 18
J17: COM4 RS232 (For VEX2-6454-4C4NE/VEX2-6454-4C4EE) .............................................. 19
J18: GPIO Port 0/1 (For VEX2-6454-4C4NE/VEX2-6454-4C4EE) ............................................ 19
J19: Print ........................................................................................................................................ 20
J20: Line-OUT ............................................................................................................................... 20
J21: MIC-IN ................................................................................................................................... 20
J22A: PC/104 Connector – 64 pin (For VEX2-6454-2C4IEE/VEX2-6450-2C3INE) ................... 21
J22A: PC/104 Connector – 64 pin (For VEX2-6454-4C4NE/VEX2-6454-4C4EE) ...................... 22
J22B: PC/104 Connector – 40 pin (For VEX2-6454-2C4IEE/VEX2-6450-2C3INE).................... 23
J23: 4P Power Source (Interconnect to J22: PC/104) ..................................................................... 23
J24: Power CONN. ........................................................................................................................ 23
J25: RESET ................................................................................................................................... 24
2.6 System Mapping ........................................................................................................................ 25
3 Software Resources ........................................................................................... 28
3.1 ICOP Technical Resource Website.......................................................................................... 28
Appendix ..................................................................................................................... 29
MINIPCIE-8111F ............................................................................................................................. 29
MicroSD slot location ........................................................................................................................ 30
Technical support ...................................................................................................... 31

VEX2-6454 User Manual
ICOP Technology Inc. V
Warranty ...................................................................................................................... 32

VEX2-6454 User Manual
ICOP Technology Inc. 1
1 General Information
1.1 Overview
The Vortex86EX2 series is the new generation heterogeneous two-core CPU
which utilizes the Master and Slave cores to simultaneously run two different
BIOSs or Operating Systems without affecting each other; equipped with various
programmable I/O; it's designed for real-time desired industrial/automation
applications.
Perfect Replacement Solution for Vortex86DX Platform.
1. CPU instruction upgrade
2. DRAM from DDR2 to DDR3
3. Manufacturing process from 90nm to 65nm

VEX2-6454 User Manual
ICOP Technology Inc. 2
VEX2-6454 is a solution of PC/104 based on VEX2-DIP168 CPU module
with PC/104 carrier board, which has lower power consumption and multiple I/O
selections.
Features of VEX2-6454:
 DM&P SoC Vortex86EX2 - 600 MHz
 512MB/1GB DDR3 onboard
 4S/2U/VGA/LCD/LVDS/LAN/LPT/Audio/16-bit GPIO
 Temperature: -20 ~ +70°C/-40 ~ +85°C(Option)
 16-bit x-ISA interface
 Touch Controller (Option)
 Micro SD socket /eMMC Onboard (Option)

VEX2-6454 User Manual
ICOP Technology Inc. 3
1.2 Block diagram
VEX2-6454-2C4IEE/VEX2-6454-2C4INE
VEX2-6454-4C4EE/VEX2-6454-4C4NE

VEX2-6454 User Manual
ICOP Technology Inc. 4
VEX2-6450-2C3INE