Icop VSX-6115-V2 User manual

VSX-6115-V2
DM&P Vortex86SX 300MHz
Tiny CPU Module
with 4S/2USB/LAN/2GPIO
128MB DDR2 Onboard
User’s Manual
(Revision 1.1 A)

Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2007 ICOPTechnology Inc.
Manual No. IUM6115-V2000-01 Ver.1.0A October, 2009
Manual No. IUM6115-V2000-01 Ver.1.1A May, 2010
Trademarks Acknowledgment
Vortex86SXis the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.

T a b l e o f C o n t e n t s
T ab l e o f C o n t e nt s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................1
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................4
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline.........................................................5
2.2 Connectors & Jumpers Location............................6
2.3 Connectors & Jumpers Summary...........................8
2.4 PinAssignments & Jumper Settings.......................9
2.5 System Mapping...................................................15
2.6 Watchdog Timer...................................................18
2.7 GPIO....................................................................19
2.8 SPI flash...............................................................20
C h a p t e r 3 Driver Installation……………………………………21
Appendix ………………………………………………………………..22
A. TCP/IPlibrary for DOS real mode.............................22
B. BIOS Default Setting.................................................23
Warranty............................................................................................24

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VSX-6115-V2
Embedded Vortex86SX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
PRINT cable x1
IDE cable x 1
USB cable x 1 (USB port x 2)
GPIO cable x 2
PS/2 Keyboard cable x 1
(Note1: VGAfunction support (ICOP-2720) via x-ISA Interface)
ICOP-2720:http://www.icop.com.tw/DB/upload/manual/ICOP-2720_Manual%20.pdf

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 2
1.2 Product Description
The VSX-6115-V2 family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
300MHz Vortex86SX System-On-Chip
128 / 256MB DDR2 system memory
Enhanced IDE
10/100Mbps Ethernet
2 USB 2.0 (host)
Up to 4 serial ports
Parallel port
16-bit GPIO x2
x-ISAbus
RS-485 withAuto Direction
2 watchdog timer
SRAM support (Optional)
JTAG interface
AMI BIOS
2MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VSX-6115-V2 Tiny family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Tiny controller. The VSX-6115-V2 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VSX-6115-V2 is suitable for broad range of data-acquisition, Industrial automation, Process
control,Automotive controller,AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery controlAnd more…application that required
small footprint, low-power and low-cost hardware with open industry standard such as Tiny.

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 3
1.3 Specifications
Features VSX-6115-V2
CPU DM&P SoC CPU Vortex86SX- 300MHz
Real Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache
BIOS AMI BIOS
Bus Interface 16-bit x-ISA interface
System Memory 128 / 256MB DDR2 Onboard
Watchdog Timer Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
LAN Integrated 10/100M Ethernet
I /O Interface Enhanced IDE port x1
RS-232 port x3
RS-232/422/485 port x1 (RS485 with Auto Direction)
Parallel port x1
USB port x2 (USB 2.0 version)
16-bit GPIO port x2
10/100Mbps Ethernet port x1
Connectors 2.00 mm 44-pin box header for IDE x1
2.00 mm 26-pin box header for Print x1
2.00 mm 20-pin box header for 16-bit GPIO x2
2.00 mm 10-pin box header for RS-232 x4
2.00 mm 10-pin box header for USB x1
2.00 mm 2-pin header for Reset x1
2.00 mm 2-pin header for Console Redirection x1
2.54 mm 3-pin header for RS-485 x1
2.54 mm 5-pin box header for keyboard x1
2.54 mm 2-pin header for LINK LED x1
2.54 mm 2-pin header for TX/RX LED x1
1.25mm 6-pin Wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 2MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
SRAM support 512KB (Optional)
Power Requirement Single Voltage +5V @ 380mA
Dimension 100mm X 66mm (3.94 x2.6 inches)
Weight 63g
Operating
Temperature -20oC ~ +70oC
-40°C ~ +85°C (Optional)

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 4
1.4 Board Dimension

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 5
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: VGAfunction support (ICOP-2720) via x-ISA Interface)
ICOP-2720:http://www.icop.com.tw/DB/upload/manual/ICOP-2720_Manual%20.pdf
(Note2: COM2 RS232/422/485 is selected by BIOS setting)
(Note3: J21: Default setting of JTAG Has to be Disable: Pin 1 & Pin 2 short)
(Note4: VSX-6115-V2-256 is optional)

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 6
2.2 Connectors & Jumpers Location
Connectors

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 7
Jumpers & LEDs

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 8
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections Pin
nbrs.
J1 IDE Box Header, 2.0,22x2 44-pin
J2 USB Box Header,2.0, 5x2 10-pin
J3 10/100Base-TEthernet LAN RJ45 Connector 8-pin
J4 JTAG Wafer, 1.25, 6x1 6-pin
J5 Reset Pin Header, 2,54,1x2 2-pin
J6 PS/2 Keyboard Box Header, 2,54,1x5 5-pin
J8 COM1 Box Header, 2.05x2 10-pin
J9 GPIO ( Port 0 / 1) Box Header, 2.0,10x2 20-pin
J10 COM2(RS232/RS422/RS485)
Box Header, 2.545x2 10-pin
J12 GPIO ( Port 2 / 3) Box Header, 2.0,10x2 20-pin
J13 RS-485 Molex Header,2.54,3x1 3-pin
J14 Power Connector Terminal Block 5.0,2x1 2-pin
J15 COM3 Box Header, 2.05x2 10-pin
J16 PRINT Box Header, 2.0,13x2 26-pin
J17 COM4 Box Header, 2.05x2 10-pin
J18 x-ISAConnector – 64 pin Box Header, 2.5432x2 64-pin
J20 Console Redirection Pin Header, 2.0,1x2 2-pin
J21 JTAG Disable (Default setting)
Pin Header, 2,54,1x2 2-pin
J22 LAN LED Pin Header, 2,54,2x2 4-pin
PWR-LED
PowerActive LED (Red) LED-SMD
IDE- LED IDEActive LED (Green ) LED-SMD
LED 3 LAN Link/Active LED (Green)
LED-SMD
LED 4 LAN Duplex LED (Yellow ) LED-SMD
SP1 BUZZER

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 9
2.4 Pin Assignments & Jumper Settings
J1: IDE (44 Pins)
J2: USB
Pin # Signal Name
Pin # Signal Name
1 VCC 2 VCC
3 LUSBD3- 4 LUSBD2-
5 LUSBD3+ 6 LUSBD2+
7 GND 8 GND
9 GGND 10 GGND
J4: JTAG
Pin # Signal Name
Pin # Signal Name
1 VCC 2 GND
3 TCK 4 TDO
5 TDI 6 TMS
Pin # Signal Name
Pin # Signal Name
1 IDERST 2 GND
3 IDED7 4 IDED8
5 IDED6 6 IDED9
7 IDED5 8 IDED10
9 IDED4 10 IDED11
11 IDED3 12 IDED12
13 IDED2 14 IDED13
15 IDED1 16 IDED14
17 IDED0 18 IDED15
19 GND 20 NC
21 IDEREQ 22 GND
23 IDEIOW 24 GND
25 IDEIOR 26 GND
27 ICHRDY 28 GND
29 IDEACK 30 GND
31 IDEINT 32 NC
33 IDESA1 34 IDECBLID
35 IDESA0 36 IDESA2
37 IDECS-0 38 IDECS1
39 IDELED 40 GND
41 VCC 42 VCC
43 GND 44 NC

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 10
J5: RESET
Pin # Signal Name
Pin # Signal Name
1 Reset 2 GND
J6: PS/2 Keyboard
Pin # Signal Name
Pin # Signal Name
1 KBCLK 2 KBDAT
3 NC 4 GND
5 VCC
J8: COM 1 (Optional: TTL)
Pin # Signal
Name Pin # Signal Name
1 DCD1 2 RXD1
3 TXD1 4 DTR1
5 GND 6 DSR1
7 RTS1 8 CTS1
9 RI1 10 NC
J9: GPIO (Port 0 / Port 1)
Pin # Signal Name
Pin # Signal Name
1 GND 2 VCC
3 GP00 4 GP10
5 GP01 6 GP11
7 GP02 8 GP12
9 GP03 10 GP13
11 GP04 12 GP14
13 GP05 14 GP15
15 GP06 16 GP16
17 GP07 18 GP17
19 VCC 20 GND

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 11
J10: COM2 RS232 / RS422 / RS485 (Optional: TTL)
Pin # Signal Name Pin #
Signal Name
1 DCD2/ 422TX- / RS485- 2 RXD2 / 422TX+ / RS485+
3 TXD2 / 422RX+ 4 DTR2 / 422RX-
5 GND 6 DSR2
7 RTS2 8 CTS2
9 RI2 10 NC
J12: GPIO (Port 2 / 3)
Note:
If you Enable 2M SPI flash Disk on the BIOS setting, you cannot use GP30~GP33 Pins.
If you Enable RS-232/422/485 on the BIOS setting, you cannot use GP25~GP27 Pins.
J13: RS-485 (Auto direction)
Pin # Signal Name
Pin # Signal Name
1 GND 2 VCC
3 GP20 4 SPICS / GP30
5 GP21 6 SPICLK / GP31
7 GP22 8 SPID0 / GP32
9 GP23 10 SPIDI / GP33
11 GP24 12 GP34
13 GP25/RS232
14 GP35
15 GP26/RS422
16 GP36
17 GP27/RS485
18 GP37
19 VCC 20 GND
Pin # Signal Name
1 RS485＋
2 RS485－
3 GND

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 12
J14: Power Connector (Terminal Block 5.0mm)
Pin # Signal Name
1 +5V
2 GND
J15: COM3 (Optional: TTL)
Pin # Signal Name
Pin # Signal Name
1 DCD3 2 RXD3
3 TXD3 4 DTR3
5 GND 6 DSR3
7 RTS3 8 CTS3
9 RI3 10 NC
J16: PRINT
Pin # Signal Name
Pin # Signal Name
1 STB- 14 AFD-
2 PD0 15 ERR-
3 PD1 16 INIT-
4 PD2 17 SLIN-
5 PD3 18 GND
6 PD4 19 GND
7 PD5 20 GND
8 PD6 21 GND
9 PD7 22 GND
10 ACK- 23 GND
11 BUSY 24 GND
12 PE 25 GND
13 SLCT 26 NC
J17: COM4 (Optional: TTL)
Pin # Signal Name
Pin # Signal Name
1 DCD4 2 RXD4
3 TXD4 4 DTR4
5 GND 6 DSR4
7 RTS4 8 CTS4
9 RI4 10 NC

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 13
J18: x-ISA Connector – 64pin
Pin # Signal Name
Pin # Signal Name
1 GND 2 SBHE
3 RSTDRV 4 SD7
5 VCC 6 SD6
7 SD8 8 SD5
9 SD9 10 SD4
11 SD10 12 SD3
13 SD11 14 SD2
15 SD12 16 SD1
17 SD13 18 SD0
19 GND 20 IOCHRDY
21 SMEMW 22 AEN
23 SMEMR 24 SA19
25 IOW 26 SA18
27 IOR 28 SA17
29 SD14 30 SA16
31 SD15 32 SA15
33 MEMCS16
34 SA14
35 ICOS16 36 SA13
37 REFRESH 38 SA12
39 SYSCLK 40 SA11
41 IRQ7 42 SA10
43 IRQ6 44 SA9
45 IRQ5 46 SA8
47 IRQ4 48 SA7
49 IRQ3 50 SA6
51 IRQ10 52 SA5
53 IRQ11 54 SA4
55 BALE 56 SA3
57 VCC 58 SA2
59 OSC 60 SA1
61 GND 62 SA0
63 IRQ12 64 IRQ14
J20: Console Redirection (Pin 1 & Pin 2 short)
Pin # Signal Name
Pin # Signal Name
1 Console_Red
2 GND

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 14
J21: JTAG Disable (Default setting: Pin 1 & Pin 2 short)
Pin # Signal Name
Pin # Signal Name
1 GND 2 JTAG Disable
J22: LAN LED
Pin # Signal Name
Pin # Signal Name
1 VCC 2 Link /Active
3 VCC 4 TX / RX

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 15
2.5 System Mapping

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 16

Vortex86SX-6115-V2 Vortex86SXTiny CPU Module 17