ICP DAS USA SP-S2-DS User manual

P1
SP-S2-DS Quick Start
v1.0, April 2023
Packing List
In addition to this guide, the package includes the following items:
SP-S2-DS
M12A-2P-IP67
Technical Support
[email protected]
www.icpdas.com
Resources
How to search for drivers, manuals and
spec information on ICP DAS website.
For Mobile Web
For Desktop Web
Model Name
Model Name

P2
1 Appearance & Pin Assignment
Number
Instructions
1
Wall mount
2
Magnetic mount
3
Power connector
CONN.
Pin Assignment
1
V-
2
V+
2 Connecting the SP-S2-DS and iSOS-109
Adjust the charging mode(JP2) of iOS-109 to "External power supply
mode".
○
1
○
2
○
3
Connect the V+ pin of SP-S2-DS to VCC terminal on EXTin connector of
iSOS-109, and connect the V- pin to the GND terminal.

P3
3 Installing a waterproof connector on SP-S2-DS
Step 1: Feed the end of the two core power cable through the Sealing nut, Seal, Clamp Ring,
Gasket and Lock Nut.
Step 2: Insert two conductors into the holes on the Cord Connector. See the table below for the
correct pin-out connections.
Step 3: Insert the Gasket into the Clamping Ring.

P4
Step 4: Wrap the Clamp Ring around the Cord Connector.
Step 5: Insert the Seal into the Clamp Ring.
Step 6: Push the Sealing Nut forward and Hand-tighten it to seal the assembly.
Step 7: Wrap the O-Ring around the Cord Connector.