ICP DAS USA WISE-5801-MTCP User manual

WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
WISE-5801-MTCP
User-defined I/O & Data Logger Module
Quick Start Guide
Thank you for purchasing WISE-5801-MTCP –the Intelligent Data Logger PAC
controller for remote monitoring and control application. This Quick Start Guide
will provide you with minimum information to get started with WISE-5801-MTCP. It
is intended for use only as a quick reference. For more detailed information and
procedures, please refer to the full user manual on the CD included in this
package.
In addition to this guide, the package includes the following items:
GSM Antenna
WISE-5801-MTCP Software 2G microSD RS-232 cable Screw Driver
(ANT-421-02)
Series Module Utility CD card (CA-0910) (1C016) Only for WISE-
5801-MTCP
WISE-5801-MTCP Quick Start Guide
WISE-5801-MTCP Website 
https://www.icpdas-usa.com/wise_5801_mtcp.html 

WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
1--------------------------------------------
Configuring Boot Mode
Make sure the “Lock“ switch placed in the “OFF”
position, and the “Init’ switch placed in the “OFF”
position.
2 ---------------------------------------------------------------------
Connecting to PC, Network and Power
The WISE-5801-MTCP is equipped with an RJ-45 Ethernet port for connection to
an Ethernet hub/switch and PC. You can also link directly the WISE-5801-MTCP to
PC with an Ethernet cable.
WISE-5801-MTCP
+Vs
+
WISE-5801-MTCP Quick Start Guide

WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
3. Installing the MiniOS7 Utility
Step 1: Get the MiniOS7 Utility
The MiniOS7 Utility can be obtained from companion CD or our FTP site:
CD:\Tools\MiniOS7 Utility\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/
Please download version v3.2.4 or later.
Step 2: Follow the prompts to complete the installation
MiniOS7 Utility Ver 3.24
After the installation has been completed, there will
be a new short-cut for MiniOS7 Utility on the
desktop.
4-------------------------------------------------------------------------
Using MiniOS7 Utility to Assign a New IP
The WISE-5801-MTCP is an Ethernet device, which comes with a default IP address,
therefore, you must first assign a new IP address to the WISE-5801-MTCP.

WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4

WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
3
the status tip,

WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
5----------------------------------------------------------------------------------
Go to WISE-5801-MTCP Web Site to edit Control
Logic
Please follow the steps below to implement IF-THEN-ELSE control logic on
controllers:
Step 1: Open a browser, and type in the URL address of the WISE-5801-MTCP
Open a browser (recommended using Internet Explorer, new version is better). Type
in the URL address of the WISE-5801-MTCP module in the address bar. Make sure
the IP address is accurate.
Step2: Get on the WISE-5801-MTCP web site
Get on the WISE-5801-MTCP web site.
Login with the default password
“wise”. Implement the control logic
configuration in the order (Basic
SettingAdvanced SettingRule
SettingDownload to Module), then
complete the IF-THEN-ELSE rule
editing.
.
Step 3: For more detail information, please refer to WISE User Manual
WISE-5801-MTCP Quick Start Guide