ICP DAS USA PMD series User manual

ICP DAS
PMC-523x/PMC-224x/PMD
(Power Meter Concentrator) Series
User Manual
[Version 3.6.6]

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Disclaimer
The information furnished by ICP DAS Co. Ltd. (hereinafter “ICP DAS”) is
accurate and reliable to ICP DAS’s best knowledge. ICP DAS reserves the right to
change the content of this manual at any time without notice.
Through the communication mechanisms provided by third-party companies
(such as LINE, WeChat, Facebook Messenger, Microsoft Azure, IBM Bluemix), this
controller can send the notification messages and information regarding this controller
to the related personal account or the third-party platform (function). However, this
function may not be available due to the third-party companies close or terminate the
communication mechanisms of their systems.
ICP DAS cannot guarantee that this controller is free of any actual or legal
defects (including but not limited to stability, reliability, accuracy, completeness,
validity, suitability for a specific purpose, security related defects, errors or bugs,
infringement of rights etc.)。ICP DAS shall not be responsible for any damages
inflicted upon users in relation to the use of the controller.
Copyright and Trademark Information
© Copyright 2019 by ICP DAS Inc., LTD. All rights reserved worldwide.
Trademark of Other Companies
The names used for identification only maybe registered trademarks of their
respective companies.
License
The user can use, modify and backup this software on a single machine. The user
may not reproduce, transfer or distribute this software, or any copy, in whole or in
part.

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Table of Contents
1System Introduction ....................................................................................1
2Before Installation.......................................................................................6
3System Login..............................................................................................7
4System Main Page.......................................................................................8
4.1 System function area.........................................................................9
4.1.1 Rules management toolbar......................................................9
4.1.2 Real-time information area....................................................12
4.1.3 System function toolbar........................................................12
4.2 Sub-function area ...........................................................................14
4.3 Data review/System setting area.......................................................14
5Main Page................................................................................................17
5.1 Power Meter Information ................................................................17
5.1.1 Power Meter Information Overview.......................................17
5.1.2 Power Meter Statistics Information Overview.........................21
5.1.3 Other Information................................................................22
5.1.4 I/O Information ...................................................................22
5.2 Power Data Information ..................................................................23
5.2.1 Overview............................................................................23
5.2.2 Group Overview..................................................................24
5.3 Realtime Chart...............................................................................25
5.3.1 Power Meter Mode ..............................................................25
5.3.2 Group Mode........................................................................27
5.4 Historical Chart..............................................................................29
5.5 Historical Data Report.....................................................................31
5.6 Historical Electricity Analysis..........................................................33
5.6.1 Energy Usage Analysis by Trend ...........................................33
5.6.2 Energy Usage Analysis by Time Period..................................36
5.6.3 Energy Usage Breakdown by Circuit/Group ...........................38
5.7 PUE Information ............................................................................41
5.7.1 Real-Time...........................................................................41
5.7.2 History ...............................................................................41
5.8 I/O Information ..............................................................................43
5.9 I/O Realtime Chart .........................................................................44
5.10 I/O Historical Chart ........................................................................45
5.11 Event Log......................................................................................47

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
5.12 Polling Time Information ................................................................48
5.13 Modbus Table Information ..............................................................48
5.14 UID Information.............................................................................49
5.15 Ping Status Page.............................................................................50
6System Setting..........................................................................................51
6.1 Time Setting ..................................................................................52
6.2 Network Setting .............................................................................54
6.3 SNMP Setting ................................................................................60
6.4 Security Setting..............................................................................63
6.5 I/O Interface Setting .......................................................................65
6.6 Other Setting..................................................................................68
6.7 Power Meter Group Setting .............................................................71
6.7.1 Group and Subgroup Viewing ...............................................71
6.7.2 Group and Subgroup Setting .................................................71
6.7.3 Group and Subgroup configuration........................................73
6.7.4 Setup the loops/phases of the subgroup ..................................73
6.7.5 Loop/Phase of group configuration........................................75
6.8 Firmware Update............................................................................76
6.9 Rule File Import & Export...............................................................78
7Power Meter & I/O Module Setting.............................................................81
7.1 Power Meter Setting .......................................................................82
7.1.1 Scan to add Modbus RTU Power Meters ................................83
7.1.2 Add Modbus RTU Power Meter Manually..............................84
7.1.3 Add Modbus TCP Power Meter Manually..............................86
7.1.4 Power Meter List Interface....................................................87
7.1.5 Modbus RTU Power Meter Setting ........................................88
7.1.6 Modbus TCP Power Meter Setting.........................................91
7.2 XV-Board Setting (PMD series does not support this function.)...........94
7.2.1 XV-Board DI Channel Settings..............................................94
7.2.2 XV-Board DO Channel Settings ............................................95
7.2.3 XV-Board AI Channel Settings..............................................97
7.2.4 XV-Board AO Channel Settings ..........................................100
7.3 I/O Module Setting.......................................................................101
7.3.1 Scan to Add ICP DAS M-7000/DL Modules.........................102
7.3.2 Add Modbus RTU Module (or M-7000/DL/IR Module) Manually
104
7.3.3 Add Modbus TCP Module Manually....................................105
7.3.4 I/O Module List Interface ...................................................106

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
7.3.5 M-7000/DL/IR Module Setting ...........................................107
7.3.6 Modbus RTU Module Setting..............................................112
7.3.7 Modbus TCP Module Setting ..............................................124
8Logger Setting ........................................................................................127
8.1 Data Logger Setting......................................................................128
8.2 Event Logger Setting ....................................................................131
8.3 FTP Upload Setting ......................................................................132
8.4 Report Sending Setting Page..........................................................134
8.4.1 Sending Setting .................................................................134
8.4.2 Re-send Function...............................................................134
8.5 The Path of Data Log File .............................................................136
8.6 The format of the Power Data Logger file .......................................138
8.7 The format of the Power Report file ...............................................139
8.8 The Format of I/O Data File ..........................................................143
8.9 The Format of User-Defined Data File............................................143
9IoT Platform Setting................................................................................144
9.1 Microsoft Azure Setting ................................................................145
9.2 IBM Bluemix Setting....................................................................149
9.3 MQTT Setting..............................................................................151
9.3.1 Broker Setting ...................................................................151
9.3.2 Topic Import/Export Setting................................................157
9.4 IoTstar Real-Time Data Sending Setting .........................................159
9.5 IoTstar Historical Data Sending Setting...........................................160
9.6 IoTstar Bot Service Setting............................................................161
10 Advanced Setting....................................................................................163
10.1 Email Setting ...............................................................................163
10.2 SMS Setting.................................................................................167
10.2.1 SMS Alarm Setting ............................................................167
10.2.2 SMS Command Setting ......................................................169
10.3 SNMP Trap Setting.......................................................................173
10.4 LINE Notify Setting .....................................................................178
10.4.1 Message Setting.................................................................178
10.4.2 Chat Room Setting.............................................................180
10.5 Timer Setting ...............................................................................183
10.6 Schedule Setting...........................................................................185
10.7 PUE Setting.................................................................................189
10.8 Internal Register Setting................................................................191
10.9 Ping Setting .................................................................................193

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
11 Rules Setting ..........................................................................................195
11.1 IF Condition Setting .....................................................................197
11.1.1 ICP DAS Module...............................................................198
11.1.2 Modbus Module ................................................................203
11.1.3 Power Meter......................................................................206
11.1.4 Microsoft Azure.................................................................207
11.1.5 IBM Bluemix ....................................................................208
11.1.6 MQTT..............................................................................209
11.1.7 Connection Status ..............................................................211
11.1.8 Timer................................................................................211
11.1.9 Schedule...........................................................................212
11.1.10 Mobile Network Signal Strength..........................................212
11.1.11 FTP Upload Status .............................................................213
11.1.12 SD Card Status ..................................................................213
11.1.13 Rule Status........................................................................214
11.1.14 Internal Register ................................................................214
11.1.15 PUE .................................................................................215
11.1.16 Ping..................................................................................216
11.2 THEN/ELSE Action Setting ..........................................................217
11.2.1 ICP DAS Module...............................................................218
11.2.2 Modbus Module ................................................................223
11.2.3 Power Meter......................................................................224
11.2.4 Microsoft Azure.................................................................225
11.2.5 IBM Bluemix ....................................................................227
11.2.6 MQTT..............................................................................228
11.2.7 Timer................................................................................230
11.2.8 Email................................................................................231
11.2.9 SMS Alarm .......................................................................232
11.2.10 SNMP Trap .......................................................................232
11.2.11 LINE Notify......................................................................233
11.2.12 Bot Service .......................................................................234
11.2.13 Re-boot System .................................................................234
11.2.14 Reset Modem ....................................................................234
11.2.15 Data Logger ......................................................................235
11.2.16 Rule Status........................................................................235
11.2.17 Internal Register ................................................................236
Appendix I：Modbus Address Table ................................................................238
Appendix II：Reset to Factory Default Setting and Send Password toAdministrator

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
................................................................................................312
Appendix III：Setup the GTM-203M-3GWA with PMD....................................315
Appendix IV：The configuration setting of M-7000/DL module.........................316
Appendix V：The SNMP Variables for PMC/PMD ...........................................320
Appendix VI：The format of CGI Query command...........................................328
Appendix VII：Change the value of output channel of module or Internal Register by
MQTT protocol.........................................................................341
Appendix VIII：The JSON format for the communication with IoT Platform.......343
Appendix IX：PMC-523x / PMC-224x LED Indicators.....................................348
Appendix X：ICP DAS “IoTstar Trial” account application................................349

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
List of Figures
Figure1-1 : System Architecture.......................................................................2
Figure3-1 : PMC/PMD Login page ..................................................................7
Figure4-1 : Main Page ....................................................................................8
Figure4-2 : System Function Area (login as a Administrator) ..............................9
Figure4-3 : System Function Area(login as a General user).................................9
Figure4-4 : Rules management toolbar (login as aAdministrator)........................9
Figure4-5 : Rules management toolbar (login as a General user) .......................10
Figure4-6 : Confirm to clear settings ..............................................................10
Figure4-7 : Confirm to load settings...............................................................10
Figure4-8 : Confirm to save settings...............................................................11
Figure4-9 : Confirm to logout (The settings are saved).....................................11
Figure4-10 : Confirm to logout (The settings are not saved) ...............................11
Figure4-11 : Real-time information area...........................................................12
Figure4-12 : Real-time information list ............................................................12
Figure4-13 : Current function path...................................................................14
Figure4-14 : Power data Overview page...........................................................15
Figure4-15 : Select the classification of Power data...........................................15
Figure4-16 : Display power data of the selected classification ............................16
Figure5-1 : Information display options on Main Page .....................................17
Figure5-2 : Power Meter Information Overview ..............................................18
Figure5-3 : The attribute of PM-3133 Power Meter..........................................19
Figure5-4 : The attribute of PM-3133-MTCP Power Meter...............................19
Figure5-5 : Real Time Power Information of PM-3133.....................................19
Figure5-6 : Real Time Power Information of PM-3114.....................................20
Figure5-7 : Real Time Power Information of PM-3112.....................................20
Figure5-8 : Power Meter Statistics Information ...............................................21
Figure5-9 : Power Meter Other Information Page ............................................22
Figure5-10 : Power Meter I/O Information Page ...............................................22
Figure5-11 : Power Data Overview Mode ........................................................23
Figure5-12 : Change Display List Button .........................................................24
Figure5-13 : The Power Meter List..................................................................24
Figure5-14 : Power Data Group Overview Mode ..............................................24
Figure5-15 : Realtime Chart (Power Meter Mode).............................................26
Figure5-16 : Realtime Chart (Group Mode)......................................................28
Figure5-17 : Historical Chart Inquiry...............................................................29

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure5-18 : Historical Data Chart for power data.............................................30
Figure5-19 : Historical Data Table for power data .............................................31
Figure5-20 : Historical Data Report inquiry......................................................31
Figure5-21 : Daily Report for PM-3133 ...........................................................32
Figure5-22 : Daily Report for PM-3114 ...........................................................33
Figure5-23 : "Total Accu. Electricity" report for Power Meters Group.................33
Figure5-24 : Energy Usage Analysis by Trend ..................................................34
Figure5-25 : Inquiry by Group Mode ...............................................................35
Figure5-26 : Inquiry by User-defined Mode......................................................35
Figure5-27 : PM-3114 Energy Usage Analysis Trend Chart................................36
Figure5-28 : Energy Usage Analysis by Time Period .........................................37
Figure5-29 : Time Histogram Chart for PM-3114 Loop 1...................................38
Figure5-30 : Energy Usage breakdown by Circuit/Group ...................................38
Figure5-31 : Inquiry by Group Mode ...............................................................39
Figure5-32 : Energy Usage Breakdown by Circuit/Group Chart..........................40
Figure5-33 : PUE information - Realtime.........................................................41
Figure5-34 : PUE information - History(1).......................................................42
Figure5-35 : PUE information - History(2).......................................................42
Figure5-36 : I/O Information(login as Administrator) ........................................43
Figure5-37 : I/O Information(login as General User) .........................................43
Figure5-38 : I/O Realtime Chart......................................................................44
Figure5-39 : I/O Channel Historical Chart........................................................45
Figure5-40 : User-Defined Historical Chart ......................................................45
Figure5-41 : I/O Historical Data Chart.............................................................46
Figure5-42 : Event Log information display .....................................................47
Figure5-43 : Polling Time Information.............................................................48
Figure5-44 : The Interface of Modbus Table Information...................................48
Figure5-45 : Inquiry result of Modbus Table Information...................................49
Figure5-46 : Power Meter UID Information Page..............................................50
Figure5-47 : Ping Status page..........................................................................50
Figure6-1 : System Setting Overview Page .....................................................51
Figure6-2 : Time Setting Page .......................................................................52
Figure6-3 : Time Synchronization Setting.......................................................53
Figure6-4 : Network Setting Page ..................................................................54
Figure6-5 : Signal Strength level and IP address for Mobile Network.................56
Figure6-6 : DDNS Setting Page .....................................................................56
Figure6-7 : IoTstar connection setting page(1).................................................58
Figure6-8 : IoTstar connection setting page(1).................................................59

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure6-9 : SNMP Setting Page .....................................................................60
Figure6-10 : SNMP Manager List....................................................................61
Figure6-11 : The Address Setting for SNMP Manager .......................................61
Figure6-12 : The Working Model Setting for SNMP Manager ............................61
Figure6-13 : Save the SNMP Manager Setting..................................................62
Figure6-14 : Security Setting Page...................................................................63
Figure6-15 : Password Setting Page.................................................................64
Figure6-16 : Local FTP Server Setting Page .....................................................64
Figure6-17 : Idle Time Setting Page.................................................................65
Figure6-18 : I/O Interface Setting Page............................................................65
Figure6-19 : Function setting to connect to HMI or SCADA ..............................66
Figure6-20 : Function setting to connect to Modbus RTU slave device................67
Figure6-21 : I/O Function setting about LAN....................................................68
Figure6-22 : Other setting page .......................................................................69
Figure6-23 : Power Meter Group Setting..........................................................71
Figure6-24 : Group and Subgroup Viewing ......................................................71
Figure6-25 : Group Setting .............................................................................72
Figure6-26 : Subgroup Setting ........................................................................72
Figure6-27 : Subgroup Setting Window ...........................................................72
Figure6-28 : Configurations for Subgroup........................................................73
Figure6-29 : Loops/Phases of subgroup Setting.................................................74
Figure6-30 : Choose Loops/Phased of Subgroup...............................................74
Figure6-31 : Add Loops/Phases for Subgroup...................................................75
Figure6-32 : Configurations for Loops/Phased of Subgroup ...............................75
Figure6-33 : Firmware Update(1)....................................................................76
Figure6-34 : Firmware Update(2)....................................................................77
Figure6-35 : Firmware Update(3)....................................................................77
Figure6-36 : Firmware Update(4)....................................................................77
Figure6-37 : Firmware Update(5)....................................................................78
Figure6-38 : Firmware Update(6)....................................................................78
Figure6-39 : Export / Import Setting page and the settings to be backed up..........79
Figure7-1 : Meter / Module Setting Page ........................................................81
Figure7-2 : Power Meter Setting Page ............................................................82
Figure7-3 : The “Scan” button to search Power Meter ......................................83
Figure7-4 : Set up the Scanning Range for the Power Meters............................83
Figure7-5 : Scanning the Power Meters ..........................................................84
Figure7-6 : The Power Meter List after Scan operation.....................................84
Figure7-7 : Select the actual Power Meter connected to PMC/PMD...................84

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure7-8 : Set up the No andAddress of the power meter................................85
Figure7-9 : Select Modbus RTU Power Meter model .......................................85
Figure7-10 : Add the Modbus RTU Power Meter manually................................86
Figure7-11 : Add Modbus TCP Power Meter....................................................86
Figure7-12 : Select Modbus TCP Power Meter model........................................86
Figure7-13 : Add the Modbus TCP Power Meter manually ................................87
Figure7-14 : Power Meter List Interface...........................................................87
Figure7-15 : PM-3133 Setting Page.................................................................89
Figure7-16 : PM-3114 Setting Page .................................................................90
Figure7-17 : PM-3114-MTCP Setting Page ......................................................91
Figure7-18 : XV-Board Setting Page................................................................94
Figure7-19 : XV-Board DI attribute setting page...............................................95
Figure7-20 : XV-Board DO attribute setting page..............................................96
Figure7-21 : XV-Board AI attribute setting page ...............................................97
Figure7-22 : AI Deadband Operation(> or >= a numerical value)........................98
Figure7-23 : AI Deadband Operation(< or <= a numerical value)........................99
Figure7-24 : AI Deadband Operation(= a numerical value) ................................99
Figure7-25 : XV-Board AO attribute setting page............................................100
Figure7-26 : I/O Module Setting Page............................................................101
Figure7-27 : The “Scan” button to search M-7000/DL module .........................102
Figure7-28 : Set up the Scanning Range for the M-7000/DL module.................102
Figure7-29 : Scanning the M-7000/DL modules..............................................103
Figure7-30 : The M-7000/DL List after Scan operation....................................103
Figure7-31 : Select the actual M-7000/DL modules connected to PMC/PMD.....103
Figure7-32 : Set up the No andAddress of the Modbus RTU module ................104
Figure7-33 : Select the model of the Modbus RTU Module..............................104
Figure7-34 : Add the Modbus RTU Module manually .....................................105
Figure7-35 : Add Modbus TCP Module .........................................................105
Figure7-36 : Add the Modbus RTU Power Meter manually..............................106
Figure7-37 : Modbus module List Interface....................................................106
Figure7-38 : M-7000 DI Channel Setting Page................................................108
Figure7-39 : M-7000/DL DO Channel Setting Page.........................................109
Figure7-40 : M-7000/DLAI Channel Setting Page.......................................... 111
Figure7-41 : M-7000 AO Channel Setting Page ..............................................112
Figure7-42 : Modbus RTU Slave Module Setting Page....................................113
Figure7-43 : Coil Output Setting Page............................................................114
Figure7-44 : Coil Output Setting Example for Modbus RTU Module ................115
Figure7-45 : Discrete Input Setting Page ........................................................116

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure7-46 : Discrete Input Setting Example for Modbus RTU Module.............117
Figure7-47 : Input Register Setting Page........................................................119
Figure7-48 : Input Register Setting Example for Modbus RTU Module.............120
Figure7-49 : Holding Register Setting Page....................................................122
Figure7-50 : Input Register Setting Example for Modbus RTU Module.............124
Figure7-51 : Modbus TCP Slave Module Setting Page(1).................................125
Figure7-52 : Modbus TCP Slave Module Setting Page(2).................................126
Figure8-1 : Data Logger Setting Page...........................................................127
Figure8-2 : Data Logger Setting Page...........................................................128
Figure8-3 : Event Logger Setting Page .........................................................131
Figure8-4 : FTP Upload Setting Page ...........................................................132
Figure8-5 : Report Sending Setting page –Sending Setting ............................134
Figure8-6 : Report Sending Setting page –Sending Setting ............................135
Figure9-1 : Microsoft Azure Setting Page .....................................................145
Figure9-2 : Microsoft Azure Publish Message setting page.............................146
Figure9-3 : “User-Defined Data” Setting Interface of IoT Platform..................147
Figure9-4 : Microsoft Azure Subscribe Topic setting page ..............................148
Figure9-5 : IBM Bluemix Setting page .........................................................149
Figure9-6 : IBM Bluemix Subscribe Message setting page .............................150
Figure9-7 : MQTT Setting Page (Broker)......................................................152
Figure9-8 : MQTT Broker Parameter setting page .........................................152
Figure9-9 : Publish Message and Subscribe Topic setting page........................154
Figure9-10 : Publish Message Setting Page ....................................................155
Figure9-11 : Subscribe Topic Setting Page......................................................157
Figure9-12 : MQTT Topic Import/Export setting page.....................................158
Figure9-13 : The Export of MQTT Topic .......................................................158
Figure9-14 : The Import of MQTT Topic .......................................................159
Figure9-15 : IoTstar Real-Time Data Sending Setting page ..............................159
Figure10-1 : Email setting page.....................................................................164
Figure10-2 : Email setting page(Name & Description)) ...................................164
Figure10-3 : Email setting page(SMTP Server)...............................................165
Figure10-4 : Email setting page(Email Address) .............................................165
Figure10-5 : Email setting page(Email Content)..............................................166
Figure10-6 : SMS Setting Page (1) ................................................................167
Figure10-7 : SMS Setting Page (2) ................................................................168
Figure10-8 : SMS Command Setting Page (1).................................................169
Figure10-9 : SMS Command Setting for GET Command.................................171
Figure10-10 : SMS Command Setting for SET Command ..........................171

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure10-11 : SMS Command list............................................................171
Figure10-12 : SNMP Trap Setting Page ....................................................173
Figure10-13 : SNMP Trap Parameter Setting Page.....................................173
Figure10-14 : “Channel Data”Type Setting Page........................................174
Figure10-15 : Example of “Channel Data” Type Variable Binding List.........175
Figure10-16 : “User-Defined Data” Type Setting Page ...............................175
Figure10-17 : “User-Defined Data” Interface in Edit Mode.........................176
Figure10-18 : “User-Defined Data” Interface in View Mode .......................177
Figure10-19 : SNMP Trap setting with variable bindings list.......................177
Figure10-20 : LINE Notify Message Setting page (1).................................178
Figure10-21 : LINE Notify Message Setting page (2).................................179
Figure10-22 : LINE Notify Message Setting page (3).................................179
Figure10-23 : LINE Notify Message Setting page (4).................................180
Figure10-24 : LINE Notify Chat Room Setting page (1).............................181
Figure10-25 : LINE Notify Chat Room Setting page (2).............................181
Figure10-26 : LINE Notify Chat Room Setting page (3).............................182
Figure10-27 : LINE Notify Chat Room Setting page (4).............................182
Figure10-28 : LINE Notify Chat Room Setting page (5).............................182
Figure10-29 : Timer creating Page ...........................................................184
Figure10-30 : Timer setting Page(Assign Period).......................................184
Figure10-31 : Timer setting page(Internal Register) ...................................185
Figure10-32 : Schedule setting page.........................................................185
Figure10-33 : Calendar mode of Schedule setting ......................................186
Figure10-34 : Repeat mode of Schedule setting .........................................187
Figure10-35 : PUE Setting Page(1) ..........................................................189
Figure10-36 : PUE Setting Page(2) ..........................................................190
Figure10-37 : Internal Register setting page(1)..........................................191
Figure10-38 : Internal Register setting page(2)..........................................192
Figure10-39 : Ping List Page ...................................................................193
Figure10-40 : Ping List Page ...................................................................194
Figure11-1 : Rules overview page .................................................................195
Figure11-2 : Rules setting page .....................................................................196
Figure11-3 : DI condition setting page ...........................................................198
Figure11-4 : DI Counter condition setting page...............................................199
Figure11-5 : AI condition setting page ...........................................................202
Figure11-6 : Discrete Input condition setting page...........................................203
Figure11-7 : Coil Output condition setting page..............................................204
Figure11-8 : Input Register condition setting page...........................................204

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure11-9 : Holding Register condition setting page ......................................205
Figure11-10 : Power Meter condition setting page .....................................206
Figure11-11 : Microsoft Azure Connection Status condition setting.............207
Figure11-12 : Microsoft Azure Subscribe Message condition setting............207
Figure11-13 : IBM Bluemix Connection Status condition setting.................208
Figure11-14 : IBM Bluemix Subscribe Message condition setting...............209
Figure11-15 : Broker Connection Status condition setting...........................210
Figure11-16 : Subscribe Topic condition setting ........................................210
Figure11-17 : Connection Status condition setting page..............................211
Figure11-18 : Timer condition setting page ...............................................211
Figure11-19 : Schedule condition setting page...........................................212
Figure11-20 : Mobile Network Signal Strength condition setting page.........213
Figure11-21 : FTP Upload Status condition setting page.............................213
Figure11-22 : SD Card Status condition setting page..................................214
Figure11-23 : Rule Status condition setting page .......................................214
Figure11-24 : Internal register condition setting page.................................215
Figure11-25 : PUE condition setting page.................................................215
Figure11-26 : Ping condition setting page .................................................216
Figure11-27 : DI Counter action setting page ............................................218
Figure11-28 : DO action setting page .......................................................219
Figure11-29 : AO action setting page .......................................................219
Figure11-30 : Coil Output action setting page............................................223
Figure11-31 : Holding Register action setting page....................................224
Figure11-32 : Power Meter RelayAction setting page................................225
Figure11-33 : Microsoft Azure Function Status action setting .....................225
Figure11-34 : Microsoft Azure Publish Message action setting....................226
Figure11-35 : Microsoft Azure Reset Variable action setting page ...............226
Figure11-36 : IBM Bluemix Function Status action setting.........................227
Figure11-37 : IBM Bluemix Publish Message action setting .......................228
Figure11-38 : IBM Bluemix Reset Variable action setting page...................228
Figure11-39 : Broker Function action setting page.....................................229
Figure11-40 : Publish Message action setting page ....................................229
Figure11-41 : MQTT Reset Topic action setting page.................................230
Figure11-42 : Timer action setting page....................................................231
Figure11-43 : Email action setting page....................................................231
Figure11-44 : SMS Alarm action setting page............................................232
Figure11-45 : SNMP Trap Action Setting Page..........................................233
Figure11-46 : LINE Notify action setting page ..........................................233

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure11-47 : Bot Service action setting page............................................234
Figure11-48 : Re-boot system Action setting page .....................................234
Figure11-49 : Reset modem action setting page.........................................235
Figure11-50 : Data Logger action setting page...........................................235
Figure11-51 : Rule Status action setting page ............................................236
Figure11-52 : Internal Register action setting page.....................................236

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
1
1System Introduction
The PMC-523x/PMC-224x(Power Meter Concentrator)/PMD(Power Meter
Concentrator with Display) is an intelligent Power Meter Concentrator developed by
ICP DAS. It features various functions such as: power data management, logic control,
data logger and alarm notification functions. By using PMC/PMD solution; it is no
longer required to write programming for power management system. It takes only a
few clicks on the specific Web HMI Interface provided by PMC/PMD to complete
power management and logic control settings for monitoring the power meters
connected to the system. This easy-to-use solution will dramatically reduce the labor
and cost spent on power monitoring and management system.
PMC-523x/PMC-224x /PMD series products are including following models:
Product Series
PMC-523x
PMC-224x
Hardware
Dimension
117 mm x 126 mm x 58 mm
33 mm x 160 mm x 129 mm
Number of LAN Port
LAN port x 1
LAN port x 2
LCD
-
-
Detail Model Name
PMC-5231
Series
PMC-5236
Series
PMC-2241M
Support Ethernet：
PMC-5231(M)
PMC-5236(M)
PMC-2241M
PMC-2246M
Support Ethernet / 3G：
WCDMA 850/900/1800/1900 MHz
PMC-5231M-3
GWA
-
Support Ethernet / 4G：
FDD LTE: B1/B3/B5/B7/B8/B20 MHz
PMC-5231M-4
GE
PMC-5236M-4
GE
Support Ethernet / 4G：
FDD LTE: B1/B3/B8 MHz
TDD LTE: B38/B39/B40/B41 MHz
PMC-5231M-4
GC
PMC-5236M-4
GC
Product Series
PMD-220x
PMD-420x
Hardware
Dimension
213mm x 148mm x 44mm
291mm x 229mm x 54mm
Number of LAN Port
LAN port x 1
LAN port x 1
LCD
7" (16:9)
10.4" (4:3)
Support Ethernet：
Yes
Yes
PMC-523x/PMC-224x/PMD allows connections to ICP DAS power meters via
RS-485 or Ethernet interface to read the power data of the devices measured by the
power meters; and then real-time record the power data in the data file.
PMC-523x/PMC-224x/PMD also provides data logger file auto send-back function;

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
2
together with PMC Data Server software or SCADA software, it allows collection and
analysis of the power data.
Figure1-1 : System Architecture
With the built-in Web Server, it allows connection to PMC-523x/PMC-224x/PMD for
power meter parameters and system settings via browser and allows viewing the real
time or historical power data of the power meters. In addition to power data
monitoring function, the PMC-523x/PMC-224x/PMD also could connect to ICP DAS
XV-Board , M-7000/DL/IR modules and standard Modbus RTU/TCP Slave modules.
By working with the I/O modules, and functions such as IF-THEN-ELSE logic rule
execution and LINE Notify/Email/SMS Alarm Notification, PMC-523x/PMC-224x/
PMD offers more thought-out power demand management and alarm notification
functions, and is able to perform load shedding of the devices if required, and enables
real-time monitoring and control of the power consumption of the devices. At the
same time, with the Data Logger function on microSD card, the
PMC-523x/PMC-224x/PMD could real-time record the power data and I/O channel
data, and automatically sends back the data file to management center for further
statistics and analysis; PMC-523x/PMC-224x/PMD also offers Modbus TCP/RTU
Slave function that allows SCADA software or HMI devices to connect to

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
3
PMC-523x/PMC-224x/PMD to get real-time power data of the devices via Modbus
TCP/RTU protocol. In addition, they also support the MQTT protocol to connect
with the MQTT broker for the message publishing and subscribing mechanism, and
the connection with the IoT service which Microsoft Azure and IBM Bluemix provide.
The flexible integration ability with the SCADA/IoT/IT system make
PMC-523x/PMC-224x/PMD a perfect concentrator of power meter in the Energy
monitoring and management application of Industry 4.0 age.
When using PMC-523x/PMC-224x/PMD to build a power management and
monitoring system, during the whole process of system development, no
programming is required; it takes a few clicks on web page to complete all settings; it
is easy for the user to quickly view the power data of the devices and furthermore
process the data for statistics and analysis. The PMC-523x/PMC-224x/PMD is an
easy-to-use and easy-to-build total solution for power management and monitoring
that makes more efficient energy usage.
PMC/PMD features:
Web-Based Operation
No extra software tool is required; all operations can be done through the Web
browsers to build a power monitoring & management solution.
Built-in Web Server allows to set up the parameters of the power meters and
view power data via browsers.
Power Data Display
Support ICP DAS Modbus TCP/RTU power meters.
Display real-time or historical power data (in data table or chart form).
Provides Daily and Monthly power data report.
Power Data Log
Provides real-time power data log of the power meters (in csv format).
Automatically send back power data files at scheduled time via FTP.
Allow to recover Data Log files when the network is resumed after temporary
network disconnection.
Together with PMC Data Server software, it allows to import the content of
the power data files into the Database system.
Power Demand Management andAlarm Notification
With built-in IF-THEN-ELSE logic engine that enables thought-out power
demand management functions.
Support ICP DAS XV-Board, M-7000/DL/IR modules and standard Modbus
RTU/TCP Slave modules for real-time I/O control and monitoring.

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
4
Provides Timer & Schedule function for device operation control.
Provides alarm message notification function via Email/SMS message/LINE
Notify.
Local Display for On-Site operations (PMD only)
PMD is equipped with local side TFT LCD (with Touch Panel). It provides an
easy way for viewing the power data and setting the system parameters on
sites.
Connection with SCADA/IT/IoT system
Support Modbus TCP/RTU Slave protocol that allows seamless integration
with SCADA software.
PMC-523x/PMC-224x/PMD support the MQTT protocol. It can publish the
power data of the power meter which connect to PMC-523x/PMC-224x/PMD
to the MQTT broker, and receive the message of the Subscribe MQTT Topics
which is published by others MQTT device for the using in the
IF-THEN-ELSE logic rule.
PMC-523x/PMC-224x/PMD support the connection ability with the IoT
Cloud Platform as Microsoft Azure, IBM Bluemix, etc. It work as the power
meter concentrator in the IoT application to connect with power meters,
collect and transfer the power data to the Cloud platform for future data
analysis. PMC-523x/PMC-224x/PMD also can receive the message which is
published from the Cloud platform for the corresponding actions at the field
side.
PMC-523x/PMC-224x/PMD support the connection ability with ICP DAS
IoTstar. It enables the remote management and firmware update on the
PMC-523x/PMC-224x/PMD controller via user-friendly and intuitive Web
page interface, and receive the power data and I/O channel data of the Sensors
and Power meters from the remote PMC-523x/PMC-224x/PMD controllers
and import them into the Database.
Others
PMC-5231M-4GE/4GC, PMC-5231M-3GWA supports 4G/3G Wireless
data communication. With the 4G/3G SIM card, it can send the data logger
files and Email alarm message back to the control center by 4G/3G Wireless
Network.
PMC-5231M-4GE/PMC-5231M-4GC/PMC-5231M-3GWA /PMD equips
SMS command receiving and alarm message notification function. It allows
to include SMS alarm sending action into logic rules to send a pre-set SMS
message to related personnel when an event occurs. In addition, these power
meter concentrators also allows to receive the SMS commands sending by

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
5
specific phones numbers to perform tasks such as real-time channel
monitoring, channel data modification and logic rules execution (triggered by
SMS), etc. (for SMS message operation, PMD must connect with
GTM-203M-3GWA).
Provide the Internal Register with Math function. The Internal Register can be
used to hold temporary variables. It also can work with the math operators
such as plus"+", minus"-", times"*", divide"/", superscript"^", left
parenthesis"(" and right parenthesis")" to complete the editing of formula,
then PMC/PMD will calculate the result of the formula, and save the result
into the Internal Register for IF-THEN-ELSE rule checking or data logging.
Offers access management for logic rule settings and encoded function for the
content to avoid unauthorized access to the system.
This document is intended to give you a full-range operations of web page to
PMC-523x/PMC-224x/PMD. You will be able to learn how to connect to power
meters and I/O modules, how to display and log the power data, how to edit logic of
the rules and how to download the rules to the PMC-523x/PMC-224x/PMD for
conditional execution. In the following document, we use "PMC/PMD" to represent
PMC-523x/PMC-224x/PMD series controllers. For the operations of the local display
of PMD series, please refer to "PMD user manual for local operations".