ICP DAS USA DL-10 User manual

DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 1 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: serv[email protected]
Version 1.0 Jun. 2017
1Shipping package
Thanks for buying ICPDAS DL-10 module. This shipping package contains the following
items:
DL-10 module x 1 Quick Start x 1
2Appearance & Pin Assignment
Front View Rear View
DL-10 Quick Start
Temperature and
Humidity Sensor
Power and RS-485 Connector
CONN
COLOR
Pin
Assignment
1
White
D-
2
Red
Vcc
3
Black
GND
4
Green
D+
Init Switch

DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 2 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
3Connecting the Power and Host PC
Prepare for device
RS-232 to RS-485 Converter: tM-7520U (optional)
Exterior power supply device: MDR-20-24 (optional)
Wiring
Power Supply
+10 ~ +30 VDC
(e.g., MDR-20-24)
Vcc
GND
D-
D+
Connect both the DL-10 module
and the Host PC via the tM-7520U.

Connect the Vcc pin to positive terminal on a 10 ~ 30 VDC power
supply, and connect the GND pin to the negative terminal.
CA-0915 Cable

DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 3 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
4Installing Software on Your PC
Decompress DCON Utility Pro.zip, which can be obtained
from the ICP DAS web site at
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
5Search Modules
Run the DCON Utility Pro software
1. Click the COM Port button
to open the “Comport Option”
dialog box.
2. Select COM Port (e.g.,
COM9) depends on Host PC
COM port that connects to
DL-10.
3. Select the
115200 and
9600
in the Baud Rate
option.




DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 4 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
6. Click the Start Search button to search DL-10 module.
7. The DL-10 module will be displayed in list and click the Stop Search button.
6Related Information
DL-10 Product Page:
http://www.icpdas.com/root/product/solutions/remote_io/rs-485/dl_series/dl-100t485.html
Documentation:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/dl_100/
Free Development Software –DCON Utility Pro:
http://www.icpdas.com/root/product/solutions/software/utilities/dcon_utiltiy_pro.html
If you have any questions, please feel free to contact us via email at:
[e-mail], ser[email protected]
4. Select the Modbus RTU in the
Protocol option.
5. Click OK button.





DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 5 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
版本 1.0, 2017 年6月
1檢查配件
感謝您購買泓格的 DL-10 產品。產品包裝內應包含下列配件:
DL-10 模組 x 1 入門指南 x 1
2外觀 & 腳位定義
前視圖 後視圖
DL-10 快速入門指南
溫濕度感應器
電源及 RS-485 接頭
CONN
顏色
腳位
1
白色
D-
2
紅色
Vcc
3
黑色
GND
4
綠色
D+
Init 開關

DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 6 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
3連接電源與電腦主機
準備項目
RS-232 連RS-485 轉換器: tM-7520U (選購品)
外部電源供應器: MDR-20-24 (選購品)
接線方式
電源供應器
+10 - +30 VDC
(如:MDR-20-24)
Vcc
GND
D-
D+

將DL-10 模組透過 tM-7520U 轉換
器連接至電腦主機

Vcc 接至電源供應器正端(10 - 30 VDC )，GND 接至電源供應器負端
CA-0915 Cable

DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 7 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
4安裝軟體到您的電腦
解壓縮 DCON Utility Pro.zip，可從泓格科技網站下載。
詳細位置如下:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
5搜尋模組
執行 DCON Utility Pro 軟體
1.按下
COM Port
鍵來開啟
to “Comport Option”配置
對話框
2. 選擇
COM Port
(如:
COM9)，此 COM Port 為您
PC 所連接至 DL-10 的COM
Port
3. 在Baud Rate 配置區，
勾選 115200 及9600




DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017- 8 -
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail]
6. 按下 Start Search 鍵來搜尋 DL-10 模組
7. DL-10 模組將被顯示在列表中，然後按下 Stop Search 鍵
6參考資訊
DL-10 產品網頁:
http://www.icpdas.com/root/product/solutions/remote_io/rs-485/dl_series/dl-100t485.html
相關文件:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/dl_100/
免費開發軟體 –DCON Utility Pro:
http://www.icpdas.com/root/product/solutions/software/utilities/dcon_utiltiy_pro.html
如有任何問題歡迎聯繫我們，我們將會為您提供完善的咨詢服務:
E-mail: [email protected], service.[email protected]
4. 在Protocol 配置區，勾選
Modbus RTU
5.按下
OK
鍵



