ICP DAS USA PMC-5151 User manual

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 Quick Start Guide
1
Quick Start Guide for PMC-5151
November 2013, Version 1.0.1
Thank you for purchasing PMC-5151 –the Power Meter Concentrator for
power monitoring and management system. This Quick Start Guide will
provide you with minimum information to get started with PMC-5151. It is
intended for use only as a quick reference. For more detailed information and
procedures, please refer to the full user manual on the CD included in this
package.
In addition to this guide, the package includes the following items:
Power Meter microSD card Software Utility CD Screw Driver
Concentrator (1C016)
(PMC-5151)
●PMC-5151 User Manual
CD:\PMC-5151\Document
http://pmms.icpdas.com/en/download.html
●PMC-5151 Website
http://pmms.icpdas.com/en/PMC_5151.html

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 Quick Start Guide
2
1
--------------------------------------------------------------------------------
Configuring the boot mode
Before starting PMC-5151 at
the first time, be sure that the
switch is placed in the “0”
position.
2
--------------------------------------------------------------------------------
Connect to PC, Network and Power
The PMC-5151 is equipped with an RJ-45 Ethernet port for connection to
an Ethernet hub/switch and PC. You can also link directly the PMC-5151
to PC with an Ethernet cable.
PMC-5151

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 Quick Start Guide
3
3
--------------------------------------------------------------------------------
Using Browser to Assign a New IP
The PMC-5151 is an Ethernet controller, which comes with a default IP setting;
therefore, you must first assign a new IP setting to the LAN1 port of PMC-5151.
The factory default IP settings of PMC-5151 are as follows:
Item
Default
IPAddress
192.168.255.1
Subnet mask
255.255.0.0
Gateway
192.168.0.1
DNS Server
8.8.8.8 (Default: Google DNS Server)
Follow the following steps for PMC-5151 new IP setting:
Step1: Change the PC’s IP setting as following.
IP: 192.168.255.10
Subnet mask: 255.255.0.0
Gateway address: 192.168.0.1
Step2: Make sure the PC and PMC-5151(LAN1) is connecting through Ethernet.
Step3: Open a PC side browser, and type in the URL address
(http://192.168.255.1) of the PMC-5151 to connect the Web Server in
PMC-5151.
Step4: Use default Administrator password “Admin”to login the system.
Step5: Please follow the sequence【System Setting】【Network Setting】
【Network Setting(LAN1)】to change the IP setting of PMC-5151.
Step6:After complete the IP setting, please save it, and then the new IP setting
will take effect.

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 Quick Start Guide
4
4
--------------------------------------------------------------------------------
Go to PMC-5151 Web Site for Power Management
Please follow the steps below to build a power monitor and management
applications with ICP DAS PMC-5151 & Power Meter.
Step 1: Open a browser, and type in the URL address of the PMC-5151
Open a browser and type in the URL address(The new IP setting) of the
PMC-5151 in the address bar. Make sure the IP address is accurate.
Step 2: Get on the PMC-5151 web site
Get on the PMC-5151 web site. Complete the PMC-5151 setting in the
order: 【Login】【System Setting】【Meter / Module Setting】【Rule
Setting】for a power monitor and management application.
Step 3: For more detail information, please refer to PMC-5151 User
Manual

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 - 快速安裝指南
1
PMC-5151 快速安裝指南
November 2013, Version 1.0.1
歡迎使用 PMC-5151 快速安裝指南
感謝您購買 PMC-5151電錶集中器(Power Meter Concentrator)。本『快速安
裝指南』提供 PMC-5151安裝入門所需資訊，如需更詳細的安裝及使用說明，
請參閱PMC-5151使用手冊。
產品內容
除了本『快速安裝指南』外，此產品內容還包括以下配件：
電錶集中器 micro SD 卡軟體工具光碟 螺絲起子
(PMC-5151) (1C016)
技術支援
●PMC-5151 使用手冊
CD: \PMC-5151\Document
http://pmms.icpdas.com/download.html
●PMC-5151 產品網頁
http://pmms.icpdas.com/PMC_5151.html

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 - 快速安裝指南
2
1
---------------------------------------------------------
檢視啟動模式
在第一次啟動 PMC-5151 前，請
先確認旋轉式按鈕的位置在“0”。
2
--------------------------------------------------------
連接 PC 主機、網路及電源
PMC-5151 配有標準的網路接口 RJ-45，可透過網路集線器/交換器與 PC
連接，也可直接連到 PC 的網路接口。
PMC-5151

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 - 快速安裝指南
3
3
--------------------------------------------------------
啟動瀏覽器設定 PMC-5151 的IP 位址
PMC-5151 電錶集中器在出廠時會統一預設網路設定值，使用者可以依照下列步
驟自行變更網路設定。PMC-5151 的LAN1 網路出廠預設值：
項目
預設值
IP 位址
192.168.255.1
子網路遮罩(subnet mask)
255.255.0.0
通訊閘(gateway)
192.168.0.1
DNS Server
8.8.8.8(預設為 Google DNS Server)
設定步驟
步驟1：將PC 的網路設定更改為與 PMC-5151 相同網路區段。例如：
IP：192.168.255.10
Subnet mask：255.255.0.0
Gateway address：192.168.0.1
步驟2：確認 PMC-5151 的LAN1 與PC 已透過網路正確連接。
步驟3：開啟 PC 端的瀏覽器並於網址列輸入 http://192.168.255.1。
步驟4：輸入管理者預設密碼“Admin”進行登入。
步驟5：登入成功後至【系統參數設定】【網路設定】【網路設定(LAN1)】，
根據實際網路環境更改網路設定。
步驟6：儲存成功後將 PMC-5151 連接至實際網路環境。

Copyright © 2013 ICP DAS Co., Ltd. All Rights Reserved. E-mail: se[email protected]
PMC-5151 - 快速安裝指南
4
4
-------------------------------------------------------
前往 PMC-5151 網頁進行電力管理設定
使用者透過 PMC-5151 所提供的網頁，只需使用滑鼠點選設定，即可完成對
PMC-5151 及所連接電錶的電力監控規劃，PMC-5151 網頁並提供電錶電力資訊
的即時瀏覽。
步驟一：開啟瀏覽器，填入 PMC-5151 IP 作為瀏覽器的 URL 位址
開啟電腦上的瀏覽器，輸入 PMC-5151 的IP 作為 URL 位址(如有重新設定 IP，
請確認所輸入 IP 是否正確)。
步驟二：進入 PMC-5151 的設定頁面
進入 PMC-5151 所提供的參數設定頁面後，僅需依照首頁上的設定流程：
【系統登入】【系統參數設定】【電錶 / 模組設定】【邏輯規則設定】，
即可完成對 PMC-5151 電錶集中器的相關設定。
步驟三：設定流程中的細節，請參照 PMC-5151 操作手冊