IEI Technology ICE-QM770 User manual

1
COM Express Basic Type 6 module with socket G2 supports
Intel® 2nd 3rd generation Core™ i7/i5/i3 Celeron®
processor, VGA/LVDS, DDI, GbE, SATA 6Gb/s, USB 3.0, Audio
and RoHS
ICE-QM770
Quick Installation Guide
Version 1.00
Oct, 1, 2012
Package Contents
ICE-QM770 package includes the following items:
 1 x ICE-QM770-R10 single oard computer
 1 x Heat Spreader
 1 x Cooler
 1 x Driver CD
 1 x Utility CD
 1 x QIG (Quick Installation Guide)
WARNING!
Never run the em edded module without the heat sink. The heatspreader
plate shipped with the ICE-QM770 acts as a thermal interface etween the
module and the heat sink. The heat sink must e installed on the
heatspreader plate to maintain proper operating temperatures. Make sure to
maintain the heatspreader plate temperature under 60°C in operation.
©2006 Copyright y IEI Technology corp.
All rights reserved.

2
Specifications
 Form Factor
PICMG COM Express R2.0 Basic Type 6
 CPU
Socket G2 supports Intel® 2nd & 3rd generation Core™
i7/i5/i3/Celeron® processor
 PCH
Intel® QM77
 Memory
Two 204-pin 1600/1333/1066 MHz dual-channel DDR3 SDRAM
un uffered DIMMs supported (system max. 16GB)
Supports 1.35V DDR3L
 BIOS
UEFI BIOS
 Graphics Engine
Intel® HD Graphics 2000/3000
Supports DX11, OCL 1.1 and OpenGL 3.0
Full MPEG2, VC1, AVC Decode
 Display Output
VGA integrated in the Intel® QM77 (signal to ase oard)
3 x DDI (up to 2560 x 1600 @60Hz)
1 x VGA up to QXGA (up to 2048 x 1536 @75Hz)
1 x 18/24- it dual-channel LVDS (up to 1920 x 1200 @60Hz)
 Ethernet
Intel® 82579LM
 Em edded Controller
iWDD
 I/O Interface
2 x RS-232 (to ase oard) 8 x USB 2.0 (to ase oard)
4 x USB 3.0 (to ase oard) 2 x SATA 3GB/s (signal to ase oard)
2 x SATA 6G /s (signal to ase oard)
 Audio
High definition audio interface

3
 SMBus
Yes (to ase oard)
 I2C
YYes (to ase oard)
 LPC
Yes (to ase oard)
 Expansions
1 x PCIe x16 signal (to ase oard)
7 x PCIe x1 signal (to ase oard)
 Watchdog Timer
Software programma le supports 1~255 sec. system reset
 GPIO
8- it GPIO (to ase oard)
 TPM
Through the ase oard
 Intel® AMT
Supports Intel® AMT 8.0
 Power Consumption
[email protected], Vcore [email protected]3A
 Operating Temperature
-10°C ~ 60°C
 Operating Humidity
5% ~ 95%, non-condensing
 Dimensions
125 mm x 95 mm
 Weight
GW: 700g/NW: 250g
Ordering Information
ICE-GM4 A-R11: COM Express Basic Type 6 module, Intel® 22nm Core™
i7/i5/i3 processor, VGA/LVDS, G E, SATA 6G /s, USB 3.0, Audio and RoHS
ICE-DB-T6-R10: Base Board for COM Express Type 6 modules

4
Table of Jumper Setting
LABEL
FUNCTION
SW1
LCD Panel Type Setting switch
1. LVDS Panel type Selection
The Panel type of LVDS can e selected y using SW1. O =0 OFF=1
SW1
4321
EDID
Resolution Color Depth Channel
0000 640X480 18- it Single
0001 800X480 18- it Single
0010 800X600 18- it Single
0011 1024X768 18- it Single
0100 1024X768 24- it Single
0101 1280X1024 24- it Dual
0110 1600X1200 24- it Dual
0111 1280X768 18- it Single
1000 1280X800 18- it Single
1001 1366X768 24- it Single
1010 1440X900 24- it Dual
1011 1600X900 24- it Dual
1100 1680X1050 24- it Dual
1101 1920X1080 24- it Dual
1110 1920X1200 24- it Dual
1111 LVDS disa le

5
1. Flash SPI ROM (BIOS)
• JSPI1: Flash BIOS SPI ROM
PIN
NO
.
DESCRIPTION
1
+V3.3M_SPI_CON
2
SPI_CS
3
SPI_SO_SW
4
SPI_CLK_SW
5
SPI_SI_SW
6
GND
2. Flash SPI ROM (EC)
• JSPI2: Flash BIOS SPI ROM
PIN NO.
DESCRIPTION
1
+V3.3M_SPI_CON
_EC
2
SPI_CS
#0_CN_EC
3
SPI_SO_SW
_EC
4
SPI_CLK_SW
_EC
5
SPI_SI_SW
_EC
6
GND
Table of Connectors
LABEL
FUNCTION
JSPI
1
FLASH SPI ROM (BIOS)
JSPI2
FLAS
H SPI ROM (EC)
J3
COM Express
Connector
AB
J4
COM Express
Connector
CD

6
3. COM Express Connector AB
• J3: The standard COM Express connector AB location and pinouts
are shown below
Pin No. Description Pin No. Description
A1 GND B1 GND15
A2 GBE0_MDI3- B2 GBE0_ACT#
A3 GBE0_MDI3+ B3 LPC_FRAME#
A4 GBE0_LINK100# B4 LPC_AD0
A GBE0_LINK1000# B LPC_AD1
A6 GBE0_MDI2- B6 LPC_AD2
A7 GBE0_MDI2+ B7 LPC_AD3
A8 GBE0_LINK# B8 LPC_DRQ0#
A9 GBE0_MDI1- B9 LPC_DRQ1#
A10 GBE0_MDI1+ B10 LPC_CLK
A11 GND1 B11 GND16
A12 GBE0_MDI0- B12 PWRBTN#
A13 GBE0_MDI0+ B13 SMB_CK
A14 GBE0_CTREF B14 SMB_DAT
A1 SUS_S3# B1 SMB_ALERT#
A16 SATA0_TX+ B16 SATA1_TX+
A17 SATA0_TX- B17 SATA1_TX-
A18 SUS_S4# B18 SUS_STAT#
A19 SATA0_RX+ B19 SATA1_RX+
A20 SATA0_RX- B20 SATA1_RX-
A21 GND2 B21 GND17
A22 SATA2_TX+ B22 SATA3_TX+
A23 SATA2_TX- B23 SATA3_TX-
A24 SUS_S5# B24 PWR_OK
A2 SATA2_RX+ B2 SATA3_RX+
A26 SATA2_RX- B26 SATA3_RX-
A27 BATLOW# B27 WDT
A28 ATA_ACT# B28 AC/HD_SDIN2
A29 AC/HD_SYNC B29 AC/HD_SDIN1
A30 AC/HD_RST# B30 AC/HD_SDIN0
A31 GND3 B31 GND18
A32 AC/HD_BITCLK B32 SPKR
A33 AC/HD_SDOUT B33 I2C_CK
A34 BIOS_DISABLE# B34 I2C_DAT
A3 THRMTRIP# B3 THRM#

7
Pin No. Description Pin No. Description
A36 USB6- B36 USB7-
A37 USB6+ B37 USB7+
A38 USB_6_7_OC# B38 USB_4_5_OC#
A39 USB4- B39 USB5-
A40 USB4+ B40 USB5+
A41 GND4 B41 GND
A42 USB2- B42 USB3-
A43 USB2+ B43 USB3+
A44 USB_2_3_OC# B44 USB_0_1_OC#
A4 USB0- B4 USB1-
A46 USB0+ B46 USB1+
A47 VCC_RTC B47 EXCD1_PERST#
A48 EXCD0_PERST# B48 EXCD1_CPPE#
A49 EXCD0_CPPE# B49 SYS_RESET#
A 0 LPC_SERIRQ B 0 CB_RESET#
A 1 GND5 B 1 GND20
A 2 PCIE_TX5+ B 2 PCIE_RX5+
A 3 PCIE_TX5- B 3 PCIE_RX5-
A 4 GPI0 B 4 GPO1
A PCIE_TX4+ B PCIE_RX4+
A 6 PCIE_TX4- B 6 PCIE_RX4-
A 7 GND6 B 7 GPO2
A 8 PCIE_TX3+ B 8 PCIE_RX3+
A 9 PCIE_TX3- B 9 PCIE_RX3-
A60 GND7 B60 GND
A61 PCIE_TX2+ B61 PCIE_RX2+
A62 PCIE_TX2- B62 PCIE_RX2-
A63 GPI1 B63 GPO3
A64 PCIE_TX1+ B64 PCIE_RX1+
A6 PCIE_TX1- B6 PCIE_RX1-
A66 GND8 B66 WAKE0#
A67 GPI2 B67 WAKE1#
A68 PCIE_TX0+ B68 PCIE_RX0+
A69 PCIE_TX0- B69 PCIE_RX0-
A70 GND9 B70 GND22
A71 LVDS_A0+ B71 LVDS_B0+
A72 LVDS_A0- B72 LVDS_B0-
A73 LVDS_A1+ B73 LVDS_B1+
A74 LVDS_A1- B74 LVDS_B1-

8
Pin No. Description Pin No. Description
A7 LVDS_A2+ B7 LVDS_B2+
A76 LVDS_A2- B76 LVDS_B2-
A77 LVDS_VDD_EN B77 LVDS_B3+
A78 LVDS_A3+ B78 LVDS_B3-
A79 LVDS_A3- B79 LVDS_BKLT_EN
A80 GND10 B80 GND23
A81 LVDS_A_CK+ B81 LVDS_B_CK+
A82 LVDS_A_CK- B82 LVDS_B_CK-
A83 LVDS_I2C_CK B83 LVDS_BKLT_CTRL
A84 LVDS_I2C_DAT B84 VCC5SBY1
A8 GPI3 B8 VCC5SBY2
A86 RSVD B86 VCC5SBY3
A87 RSVD B87 VCC5SBY4
A88 PCIE0_CK_REF+ B88 BIOS_DIS1#
A89 PCIE0_CK_REF- B89 VGA_RED
A90 GND11 B90 GND24
A91 SPI_VCC B91 VGA_GRN
A92 SPI_MISO B92 VGA_BLU
A93 GPO0 B93 VGA_HSYNC
A94 SPI_CLK B94 VGA_VSYNC
A9 SPI_MOSI B9 VGA_I2C_CK
A96 PP_TPM B96 VGA_I2C_DAT
A97 RSVD B97 SPI_CS#
A98 RS1_TX B98 RSVD
A99 RS1_RX B99 RSVD
A100 GND13 B100 GND25
A101 RS2_TX B101 FAN_PWMOUT
A102 RS2_RX B102 FAN_TACHIN
A103 LID# B103 SLEEP#
A104 VCC_12V7 B104 VCC_12V16
A10 VCC_12V8 B10 VCC_12V17
A106 VCC_12V9 B106 VCC_12V18
A107 VCC_12V10 B107 VCC_12V19
A108 VCC_12V11 B108 VCC_12V20
A109 VCC_12V12 B109 VCC_12V21
A110 GND14 B110 GND26

9
4. COM Express Connector CD
• J4: The standard COM Express connector AB location and pinouts
are shown below
Pin No. Description Pin No. Description
C1 GND0 D1 GND15
C2 GND D2 GND
C3 USB_SSRX0- D3 USB_SSTX0-
C4 USB_SSRX0+ D4 USB_SSTX0+
C GND D GND
C6 USB_SSRX1- D6 USB_SSTX1-
C7 USB_SSRX1+ D7 USB_SSTX1+
C8 GND D8 GND
C9 USB_SSRX2- D9 USB_SSTX2-
C10 USB_SSRX2+ D10 USB_SSTX2+
C11 GND1 D11 GND16
C12 USB_SSRX3- D12 USB_SSTX3-
C13 USB_SSRX3+ D13 USB_SSTX3+
C14 GND D14 GND
C1 DDI1_PAIR6+ D1 DDI1_AUX+
C16 DDI1_PAIR6- D16 DDI1_AUX-
C17 RSVD D17 RSVD
C18 RSVD D18 RSVD
C19 PCIE_RX6+ D19 PCIE_TX6+
C20 PCIE_RX6- D20 PCIE_TX6-
C21 GND2 D21 GND17
C22 RSVD D22 RSVD
C23 RSVD D23 RSVD
C24 DDI1_HPD D24 RSVD
C2 DDI1_PAIR4+ D2 RSVD
C26 DDI1_PAIR4- D26 DDI1_PAIR0+
C27 RSVD D27 DDI1_PAIR0-
C28 RSVD D28 RSVD
C29 DDI1_PAIR5+ D29 DDI1_PAIR1+
C30 DDI1_PAIR5- D30 DDI1_PAIR1-
C31 GND3 D31 GND18
C32 DDI2_AUX+ D32 DDI1_PAIR2+
C33 DDI2_AUX- D33 DDI1_PAIR2-
C34 DDI2_CTRLCLK D34 DDI2_CTRLDATA
C3 RSVD D3 RSVD

10
Pin No. Description Pin No. Description
C36 DDI3_AUX+ D36 DDI1_PAIR3+
C37 DDI3_AUX- D37 DDI1_PAIR3-
C38 DDI3_CTRLCLK D38 DDI3_CTRLDATA
C39 DDI3_PAIR0+ D39 DDI2_PAIR0+
C40 DDI3_PAIR0- D40 DDI2_PAIR0-
C41 GND4 D41 GND19
C42 DDI3_PAIR1+ D42 DDI2_PAIR1+
C43 DDI3_PAIR1- D43 DDI2_PAIR1-
C44 DDI3_HPD D44 DDI2_HPD
C4 RSVD D4 RSVD
C46 DDI3_PAIR2+ D46 DDI2_PAIR2+
C47 DDI3_PAIR2- D47 DDI2_PAIR2-
C48 RSVD D48 RSVD
C49 DDI3_PAIR3+ D49 DDI2_PAIR3+
C 0 DDI3_PAIR3- D 0 DDI2_PAIR3-
C 1 GND5 D 1 GND20
C 2 PEG_RX0+ D 2 PEG_TX0+
C 3 PEG_RX0- D 3 PEG_TX0-
C 4 RSVD D 4 PEG_LANE_RV#
C PEG_RX1+ D PEG_TX1+
C 6 PEG_RX1- D 6 PEG_TX1-
C 7 RSVD D 7 TYPE2#
C 8 PEG_RX2+ D 8 PEG_TX2+
C 9 PEG_RX2- D 9 PEG_TX2-
C60 GND7 D60 GND21
C61 PEG_RX3+ D61 PEG_TX3+
C62 PEG_RX3- D62 PEG_TX3-
C63 RSVD1 D63 RSVD10
C64 RSVD2 D64 RSVD9
C6 PEG_RX4+ D6 PEG_TX4+
C66 PEG_RX4- D66 PEG_TX4-
C67 RSVD3 D67 GND28
C68 PEG_RX5+ D68 PEG_TX5+
C69 PEG_RX5- D69 PEG_TX5-
C70 GND9 D70 GND22
C71 PEG_RX6+ D71 PEG_TX6+
C72 PEG_RX6- D72 PEG_TX6-
C73 DDI1_CTRLDATA D73 DDI1_CTRLCLK
C74 PEG_RX7+ D74 PEG_TX7+

11
Pin No. Description Pin No. Description
C7 PEG_RX7- D7 PEG_TX7-
C76 GND8 D76 GND29
C77 RSVD4 D77 RSVD
C78 PEG_RX8+ D78 PEG_TX8+
C79 PEG_RX8- D79 PEG_TX8-
C80 GND10 D80 GND23
C81 PEG_RX9+ D81 PEG_TX9+
C82 PEG_RX9- D82 PEG_TX9-
C83 RSVD5 D83 RSVD8
C84 GND6 D84 GND30
C8 PEG_RX10+ D8 PEG_TX10+
C86 PEG_RX10- D86 PEG_TX10-
C87 GND35 D87 GND31
C88 PEG_RX11+ D88 PEG_TX11+
C89 PEG_RX11- D89 PEG_TX11-
C90 GND27 D90 GND24
C91 PEG_RX12+ D91 PEG_TX12+
C92 PEG_RX12- D92 PEG_TX12-
C93 GND11 D93 GND32
C94 PEG_RX13+ D94 PEG_TX13+
C9 PEG_RX13- D9 PEG_TX13-
C96 GND12 D96 GND33
C97 RSVD6 D97 PEG_ENABLE#
C98 PEG_RX14+ D98 PEG_TX14+
C99 PEG_RX14- D99 PEG_TX14-
C100 GND13 D100 GND25
C101 PEG_RX15+ D101 PEG_TX15+
C102 PEG_RX15- D102 PEG_TX15-
C103 GND D103 GND34
C104 VCC_12V1 D104 VCC_12V7
C10 VCC_12V2 D10 VCC_12V8
C106 VCC_12V3 D106 VCC_12V9
C107 VCC_12V4 D107 VCC_12V10
C108 VCC_12V5 D108 VCC_12V11
C109 VCC_12V6 D109 VCC_12V12
C110 GND14 D110 GND26

12
Board Layout: Jumper and Connector Locations

13
Board with Heat Spreader and Cooler dimensions: