IEI Technology Enano-8523T User manual

0-1
Enano-8523T Motherboard
1

0-2
REVISION HISTORY
Title Enano-8523T 800MHz Celeron M Board
Revision Number Description Date of Issue
1.0 Initial release MAY 2006
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part of
the manufacturer.
In no event is the manufacturer liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
IBM PC is a registered trademark of International Business Machines Corporation. INTEL
is a registered trademark of INTEL Corporation. AMI is registered trademarks of American
Megatrends Inc. Other product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
2
IEI®Technology, Corp.

0-3
Enano-8523T Motherboard
Table of Contents
1INTRODUCTION................................................................................................... 13
1.1 ENANO-8523T BOARD OVERVIEW..................................................................... 14
1.1.1 Enano-8523T Board Variations ....................................................................... 14
1.1.2 Enano-8523T Board Applications.................................................................... 14
1.1.3 Enano-8523T Board Benefits........................................................................... 14
1.1.4 Enano-8523T Board Features.......................................................................... 15
1.2 ENANO-8523T BOARD OVERVIEW..................................................................... 16
1.2.1 Enano-8523T Board Connectors ..................................................................... 17
1.2.2 Technical Specifications................................................................................... 18
2DETAILED SPECIFICATIONS ........................................................................... 21
2.1 CPU SUPPORT.................................................................................................... 22
2.2 ONBOARD CHIPSETS .......................................................................................... 22
2.2.1 Northbridge and Southbridge Chipsets ........................................................... 22
2.2.2 Intel® 852GM Northbridge Chipset................................................................ 22
2.2.3 Intel® ICH4 Southbridge Chipset.................................................................... 23
2.3 DATA FLOW........................................................................................................ 24
2.4 GRAPHICS SUPPORT ........................................................................................... 25
2.5 MEMORY SUPPORT ............................................................................................. 26
2.6 TPM SUPPORT ................................................................................................... 26
2.7 PCI BUS INTERFACE SUPPORT ........................................................................... 27
2.8 10/100 BASE-T INTERNET ................................................................................. 28
2.9 IDE DEVICE SUPPORT........................................................................................ 28
2.10 REAL TIME CLOCK............................................................................................. 28
2.11 SYSTEM MONITORING........................................................................................ 28
2.12 USB INTERFACES............................................................................................... 29
2.13 BIOS ................................................................................................................. 29
2.14 OPERATING TEMPERATURE AND TEMPERATURE CONTROL................................. 29
2.15 AUDIO CODEC.................................................................................................... 30
2.16 POWER CONSUMPTION....................................................................................... 31
2.17 PACKAGED CONTENTS AND OPTIONAL ACCESSORY ITEMS................................. 31
2.17.1 Package Contents........................................................................................... 31
3

0-4
3CONNECTORS AND JUMPERS ......................................................................... 33
3.1 PERIPHERAL INTERFACE CONNECTORS .............................................................. 34
3.1.1 Enano-8523T Board Layout............................................................................. 34
3.1.2 Peripheral Interface Connectors ..................................................................... 35
3.1.3 Rear Panel Connectors .................................................................................... 36
3.1.4 Onboard Jumpers............................................................................................. 36
3.2 INTERNAL PERIPHERAL CONNECTORS................................................................ 37
3.2.1 IDE Connector ................................................................................................. 37
3.2.2 DIO Connector................................................................................................. 38
3.2.3 Battery Connector............................................................................................ 39
3.2.4 Front Panel Connector .................................................................................... 40
3.2.5 USB Connector ................................................................................................ 41
3.2.6 Fan Connector ................................................................................................. 42
3.2.7 ATX Power Connector ..................................................................................... 43
3.2.8 Power Connector ............................................................................................. 44
3.2.9 Keyboard/Mouse Connector ............................................................................ 45
3.2.10 COM4 Connectors ......................................................................................... 46
3.2.11 Parallel Port Connector................................................................................. 47
3.2.12 Inverter Connector......................................................................................... 48
3.2.13 LVDS Connector ............................................................................................ 50
3.2.14 SODIMM Socket ............................................................................................ 51
3.2.15 Compact Flash Type 2 Socket ........................................................................ 52
3.3 EXTERNAL (REAR PANEL) CONNECTORS ........................................................... 54
3.3.1 Serial Port Connectors .................................................................................... 54
3.3.2 USB Connectors............................................................................................... 55
3.3.3 Ethernet Connector.......................................................................................... 55
3.3.4 VGA Connector ................................................................................................ 56
3.3.5 Audio Connector .............................................................................................. 57
3.4 ONBOARD JUMPERS ........................................................................................... 58
3.4.1 Reset CMOS Jumper ........................................................................................ 59
3.4.2 CF Card Setup ................................................................................................. 59
3.4.3 LCD Voltage Setup ........................................................................................... 60
4INSTALLATION AND CONFIGURATION ....................................................... 61
4.1 INSTALLATION CONSIDERATIONS ....................................................................... 62
4.1.1 Installation Notices .......................................................................................... 62
4
IEI®Technology, Corp.

0-5
Enano-8523T Motherboard
4.2 UNPACKING........................................................................................................ 63
4.2.1 Unpacking Precautions.................................................................................... 63
4.2.2 Checklist........................................................................................................... 63
4.3 ENANO-8523T BOARD INSTALLATION ............................................................... 64
4.3.1 Preinstalled Components ................................................................................. 64
4.3.2 Components to Install ...................................................................................... 65
4.3.3 DIMM Module Installation .............................................................................. 65
4.3.3.1 Purchasing the Memory Module............................................................... 65
4.3.3.2 DIMM Module Installation....................................................................... 65
4.3.4 Peripheral Device Connection......................................................................... 66
4.3.4.1 IDE Disk Drive Connector (IDE1) ........................................................... 66
4.3.4.2 Keyboard/Mouse Connection ................................................................... 67
4.4 CHASSIS INSTALLATION ..................................................................................... 67
4.5 REAR PANEL CONNECTORS ................................................................................ 67
4.5.1 LCD Panel Connection .................................................................................... 67
4.5.2 Ethernet Connection ........................................................................................ 67
4.5.3 USB Connection............................................................................................... 68
5AMI BIOS SETUP.................................................................................................. 69
5.1 INTRODUCTION .................................................................................................. 70
5.1.1 Starting Setup................................................................................................... 70
5.1.2 Using Setup ...................................................................................................... 70
5.1.3 Getting Help..................................................................................................... 71
5.1.4 Unable to Reboot After Configuration Changes.............................................. 71
5.1.5 BIOS Menu Bar................................................................................................ 71
5.2 MAIN ................................................................................................................. 72
5.3 ADVANCED......................................................................................................... 73
5.3.1 CPU Configuration.......................................................................................... 74
5.3.2 IDE Configuration ........................................................................................... 75
5.3.2.1 IDE Master, IDE Slave ............................................................................. 77
5.3.3 Super IO Configuration.................................................................................... 83
5.3.4 Hardware Health Configuration...................................................................... 87
5.3.5 ACPI Configuration ......................................................................................... 89
5.3.6 MPS Configuration .......................................................................................... 90
5.3.7 Trusted Computing ........................................................................................... 90
5.3.8 USB Configuration........................................................................................... 92
5

0-6
5.4 BOOT ................................................................................................................. 96
5.4.1 Boot Settings Configuration............................................................................. 97
5.4.2 Boot Device Priority ........................................................................................ 99
5.4.3 Hard Disk Drives ........................................................................................... 101
5.4.4 Removable Drives .......................................................................................... 101
5.4.5 CD/DVD Drives ............................................................................................. 104
5.5 SECURITY......................................................................................................... 104
5.6 CHIPSET ........................................................................................................... 106
5.6.1 Northbridge Configuration ............................................................................ 107
5.7 POWER ..............................................................................................................113
5.8 EXIT..................................................................................................................114
6SOFTWARE DRIVERS ........................................................................................117
6.1 AVAILABLE SOFTWARE DRIVERS .......................................................................118
6.2 CHIPSET DRIVER INSTALLATION........................................................................118
6.3 REALTEK AUDIO DRIVER INSTALLATION ......................................................... 121
6.4 INTEL GRAPHICS MEDIA ACCELERATOR DRIVER ............................................. 126
6.5 LAN DRIVER INSTALLATION ........................................................................... 129
ABIOS CONFIGURATION OPTIONS ................................................................ 133
A.1 BIOS CONFIGURATION OPTIONS ..................................................................... 134
BWATCHDOG TIMER .......................................................................................... 137
CADDRESS MAPPING.......................................................................................... 141
C.1 IO ADDRESS MAP ............................................................................................ 142
C.2 1ST MB MEMORY ADDRESS MAP .................................................................... 142
C.3 IRQ MAPPING TABLE....................................................................................... 143
C.4 DMA CHANNEL ASSIGNMENTS ....................................................................... 143
DEXTERNAL AC’97 AUDIO CODEC ................................................................. 145
D.1 INTRODUCTION ................................................................................................ 146
D.2 DRIVER INSTALLATION..................................................................................... 146
D.3 SOUND EFFECT CONFIGURATION ..................................................................... 147
D.4 SOUND EFFECT ................................................................................................ 148
D.5 ENVIRONMENT SIMULATION ............................................................................ 149
D.6 KARAOKE MODE.............................................................................................. 150
D.7 EQUALIZER SELECTION.................................................................................... 151
6
IEI®Technology, Corp.

0-7
Enano-8523T Motherboard
D.8 SPEAKER CONFIGURATION ............................................................................... 152
D.9 SPEAKER TEST ................................................................................................. 153
D.10 S/PDIF-IN & S/PDIF-OUT .............................................................................. 154
D.11 CONNECTOR SENSING ...................................................................................... 154
D.12 HRTF DEMO.................................................................................................... 157
D.13 MICROPHONE EFFECT ...................................................................................... 157
D.14 GENERAL ......................................................................................................... 158
EINDEX.................................................................................................................... 159
7

0-8
List of Figures
Figure 1-1: Enano-8523T Board Overview (Top View).............................................16
Figure 1-2: Enano-8523T Board Overview (Bottom View).......................................17
Figure 2-1: Data Flow Block Diagram........................................................................24
Figure 3-1: Connector and Jumper Locations (Top Side).......................................34
Figure 3-2: Connector and Jumper Locations (Bottom Side) ................................35
Figure 3-3: IDE Connector Location..........................................................................38
Figure 3-4: DIO Connector Location .........................................................................39
Figure 3-5: Battery Connector Location ...................................................................40
Figure 3-6: Front Panel Connector Location............................................................41
Figure 3-7: USB Connector Location ........................................................................42
Figure 3-8: Table 3-9: FAN1 Connector Location ....................................................43
Figure 3-9: Power Connector Location.....................................................................44
Figure 3-10: Power Connector Location...................................................................45
Figure 3-11: Keyboard/Mouse Connector Location.................................................46
Figure 3-12: COM4 Connector Location ...................................................................47
Figure 3-13: Parallel Port Connector Location.........................................................48
Figure 3-14: Inverter Connector.................................................................................49
Figure 3-15: LVDS Connector ....................................................................................51
Figure 3-16: SODIMM Socket Location (Rear Side) .................................................52
Figure 3-17: CFII Socket Location (Rear Side) .........................................................53
Figure 3-18: Enano-8523T Board Rear Panel ...........................................................54
Figure 3-19: RJ-45 Ethernet Connector ....................................................................56
Figure 3-21: Jumper Locations..................................................................................58
Figure 6-1: InstallShield Wizard Preparation Screen............................................ 119
Figure 6-2: Welcome Screen ................................................................................... 119
Figure 6-3: License Agreement............................................................................... 120
Figure 6-4: Readme Information ............................................................................. 120
Figure 6-5: Restart the Computer ........................................................................... 121
Figure 6-6: Audio Driver Install Shield Wizard Starting ....................................... 122
8
IEI®Technology, Corp.

0-9
Enano-8523T Motherboard
Figure 6-7: Audio Driver Setup Preparation .......................................................... 122
Figure 6-8: Audio Driver Welcome Screen ............................................................ 123
Figure 6-9: Audio Driver Software Configuration ................................................. 123
Figure 6-10: Audio Driver Digital Signal ................................................................ 124
Figure 6-11: Audio Driver Installation Begins ....................................................... 125
Figure 6-12: Audio Driver Installation Complete................................................... 126
Figure 6-13: GMA Driver Installation Welcome Screen ........................................ 127
Figure 6-14: GMA Driver License Agreement........................................................ 128
Figure 6-15: GMA Driver Installing Notice ............................................................. 128
Figure 6-16: GMA Driver Installation Complete .................................................... 129
Figure 6-17: LAN License Agreement .................................................................... 130
Figure 6-18: Select the Driver Directory ................................................................ 130
Figure 6-19: LAN Driver Configuration .................................................................. 131
9

0-10
List of Tables
Table 1-1: Technical Specifications ..........................................................................19
Table 2-1: Power Consumption .................................................................................31
Table 3-1: Peripheral Interface Connectors..............................................................36
Table 3-2: Peripheral Interface Connectors..............................................................36
Table 3-3: Onboard Jumpers .....................................................................................37
Table 3-4: IDE Connector Pinouts .............................................................................38
Table 3-5: DIO Connector Pinouts.............................................................................39
Table 3-6: Front Panel Connector Pinouts ...............................................................40
Table 3-7: USB Connector Pinouts............................................................................41
Table 3-8: FAN1 Pinouts.............................................................................................42
Figure 3-8: Table 3-9: FAN1 Connector Location ....................................................43
Table 3-10: Power Connector Pinouts ......................................................................43
Table 3-11: Power Connector Pinouts ......................................................................44
Table 3-12: Keyboard/Mouse Connector Pinouts ....................................................45
Table 3-13: COM4 Connector Pinouts.......................................................................46
Table 3-14: Parallel Port Connector Pinouts ............................................................48
Table 3-15: Inverter Connector Pinouts....................................................................49
Table 3-16: LVDS Connector Pinouts........................................................................50
Table 3-17: CFII Socket Pinouts.................................................................................53
Table 3-18: Serial Port Pinouts ..................................................................................55
Table 3-19: USB Connectors......................................................................................55
Table 3-20: RJ-45 Ethernet Connector Pinouts........................................................56
Table 3-21: RJ-45 Ethernet Connector LEDs............................................................56
Table 3-22: VGA Connector Pinouts .........................................................................57
Table 3-23: JP2 Jumper Settings...............................................................................59
Table 3-24: JP4 Jumper Settings...............................................................................60
Table 3-25: JP6 Jumper Settings...............................................................................60
Table 4-1: IEI Provided Cables...................................................................................66
Table 5-1: BIOS Navigation Keys...............................................................................71
10
IEI®Technology, Corp.

0-11
Enano-8523T Motherboard
List of BIOS Menus
Menu 1: Main ............................................................................................................72
Menu 2: Advanced.......................................................................................................74
Menu 3: CPU Configuration .......................................................................................75
Menu 4: IDE Configuration .........................................................................................76
Menu 5: IDE Master and IDE Slave Configuration ...................................................78
Menu 6: Super IO Configuration ................................................................................83
Menu 7: Hardware Health Configuration ..................................................................88
Menu 8: ACPI Configuration ......................................................................................89
Menu 9: MPS Configuration .......................................................................................90
Menu 10: Trusted Computing ....................................................................................91
Menu 11: USB Configuration .....................................................................................93
Menu 12: USB Mass Storage Device .........................................................................95
Menu 13: Boot ............................................................................................................96
Menu 14: Boot Settings Configuration......................................................................97
Menu 15: Boot Device Priority Settings ................................................................. 100
Menu 16: Removable Drives ................................................................................... 103
Menu 17: Security..................................................................................................... 105
Menu 18: Chipset...................................................................................................... 107
Menu 19:Northbridge Chipset Configuration ........................................................ 108
Menu 20:Power ......................................................................................................... 113
Menu 21:Exit ......................................................................................................... 115
11

0-12
Glossary
ICH4 I/O Controller Hub 4
AC ’97 Audio Codec 97
L1 Cache Level 1 Cache
ACPI Advanced Configuration and
Power Interface L2 Cache Level 2 Cache
LCD Liquid Crystal Display
APM Advanced Power Management
LPT Parallel Port Connector
ARMD ATAPI Removable Media Device
LVDS Low Voltage Differential Signaling
ASKIR Shift Keyed Infrared
MAC Media Access Controller
ATA Advanced Technology
Attachments OS Operating System
PCI Peripheral Connect Interface
BIOS Basic Input/Output System
PIO Programmed Input Output
CFII Compact Flash Type 2
PnP Plug and Play
CMOS Complementary Metal Oxide
Semiconductor POST Power On Self Test
RAM Random Access Memory
CPU Central Processing Unit
SATA Serial ATA
Codec Compressor/Decompressor
S.M.A.R.T Self Monitoring Analysis and
Reporting Technology
COM Serial Port
DAC Digital to Analog Converter
SPD Serial Presence Detect
DDR Double Data Rate
S/PDI Sony/Philips Digital Interface
DIMM Dual Inline Memory Module
SDRAM Synchronous Dynamic Random
Access Memory
DIO Digital Input/Output
DMA Direct Memory Access
SIR Serial Infrared
EIDE Enhanced IDE
TPM Trusted Platform Module
EIST Enhanced Intel SpeedStep
Technology UART Universal Asynchronous
Receiver-transmitter
FDD Floppy Disk Drive
USB Universal Serial Bus
FDC Floppy Disk Connector
VGA Video Graphics Adapter
FFIO Flexible File Input/Output
FIFO First In/First Out
FSB Front Side Bus
IrDA Infrared Data Association
HDD Hard Disk Drive
IDE Integrated Data Electronics
I/O Input/Output
12
IEI®Technology, Corp.

1-13
Enano-8523T Motherboard
Chapter
1
1 Introduction
13

1-14
1.1 Enano-8523T Board Overview
The EPIC form factor Enano-8523T ULV Intel Celeron M embedded board is fully equipped
with a high performance processor and advanced multi-mode I/Os. The Enano-8523T is
designed for system manufacturers, integrators, and VARs that want performance,
reliability, and quality at a reasonable price. The Enano-8523T supports the TPM 1.2
(Trusted Platform Module) hardware security function.
1.1.1 Enano-8523T Board Variations
IEI currently provides two Enano-8523T board variations. These are:
 Enano-8523-800Z-R10: (No TPM1.2 support)
An EPIC form factor board with an onboard zero cache ULV Intel Celeron M
800MHz CPU and LCD/CRT VGA, LAN, USB2.0, Audio, and COM ports.
 Enano-8523T-800Z-R10: (Supports TPM1.2)
An EPIC form factor board with an onboard zero L2 cache ULV Intel Celeron M
800MHz CPU and LCD/CRT VGA, LAN, USB2.0, Audio, and COM ports. This
board also supports the TPM 1.2 hardware security function.
1.1.2 Enano-8523T Board Applications
The TPM 1.2 hardware security function implemented on the Enano-8523T makes this
board ideal for applications that require durable, yet secure platforms and were data
privacy issues are critical. These applications may include:
 Automation applications
 Banking applications
 Healthcare applications
 Military applications
1.1.3 Enano-8523T Board Benefits
The TPM 1.2 hardware security function implemented on the Enano-8523T can,
 Protect secrets from attackers
 Perform cryptographic functions
14
IEI®Technology, Corp.

1-15
Enano-8523T Motherboard
o RSA, SHA-1, RNG
o Meets encryption export requirements
 Create, store and manage cryptographic keys
 Provide a unique Endorsement Key (EK)
 Performs digital signature operations
 Hold platform measurements (hashes)
 Anchor chain of trust for keys, digital certificates and other credentials
1.1.4 Enano-8523T Board Features
Some of the Enano-8523T board features are listed below:
 Complies with EPIC form factor
 Complies with RoHS
 Preinstalled 800MHz Intel Celeron M CPU
 Preinstalled CPU heat sink
 Supports a maximum front side bus (FSB) speed up to 400MHz
 Supports up to 1GB of 266MHz or 200MHz single channel DDR memory
 Supports dual independent displays, CRT display and 18-bit LVDS flat panel
screens
 Complete I/O support with
o 4 x COM ports
o 1 x IDE device
o 1 x CFII
o 1 x Intel LAN
o 4 x USB2.0
15

1-16
1.2 Enano-8523T Board Overview
Figure 1-1: Enano-8523T Board Overview (Top View)
16
IEI®Technology, Corp.

1-17
Enano-8523T Motherboard
Figure 1-2: Enano-8523T Board Overview (Bottom View)
1.2.1 Enano-8523T Board Connectors
The Enano-8523T board has the following connectors onboard:
 1 x PCI slot
 1 x Front panel connector
 1 x IDE device connector
 1 x Compact flash connector
 1x Parallel port connector
 1 x RS-232 serial port connector
 1x USB 2.0 connector
 1 x LCD LVDS interface Connector
 1 x Inverter power connector
 1 x DIO connector
 1 x Keyboard/mouse connector
 1 x ATX connector
17

1-18
 1 x Fan connector
 1 x PCI slot
 1 x DDR SDRAM SODIMM socket
The Enano-8523T board has the following connectors on the board rear panel:
 3 x Serial port connectors (COM)
 1 x VGA connector
 1 x RJ-45 Ethernet connector
 2 x USB 2.0 ports
 1 x Audio connector (3 x audio jacks)
The location of these connectors on the Enano-8523T can be seen in Figure 1-1 and
Figure 1-2. These connectors are fully described in Chapter 3.
1.2.2 Technical Specifications
Enano-8523T board technical specifications are listed in Table 1-1. Detailed descriptions
of each specification can be found in Chapter 2 Detailed Specifications.
SPECIFICATION
CPUs Supported Intel®Celeron®M
Chipsets Northbridge: Intel®852GM
Southbridge: Intel®ICH4
I/O Controller ICH4
Graphics Support Intel® Extreme Graphics 2
Memory One DDR SDRAM SODIMM memory module (Max.
1GB)
PCI Bus Interface 33MHz, Revision 2.3
HDD Interface One IDE channel supports two Ultra ATA 100/66/33
devices
USB Interfaces Four USB 2.0 connectors supported
18
IEI®Technology, Corp.

1-19
Enano-8523T Motherboard
Serial Ports Four COM ports
Real Time Clock 256-byte battery backed CMOS RAM
Hardware Monitoring Cooling fans, temperature and system voltages
Power Management Supports Advanced Configuration and Power Interface
(ACPI) Specifications Revision 2.0
Ethernet 10/100 Base-T Intel 82562ET
BIOS AMI flash BIOS
Physical Dimensions 115mm x 165mm (width x length)
Weight GW: 1.1 Kg
NW: 0.95 Kg
Operating Temperature Minimum: 0ºC (32°F)
Maximum: 60°C (140°F)
Audio Interfaces AC’97 Codec Realtek ALC655
Table 1-1: Technical Specifications
19

1-20
THIS PAGE IS INTENTIONALLY KEPT BLANK
20
IEI®Technology, Corp.