IEI Technology AC-KIT-888HD User manual

Product User Manual
and enterprise branch and head officesAC-KIT-888HD
IEI
www.enochsystems.com 1-877-722-1116 [email protected]
Copyright © 2013 Enoch Systems, LLC, Enoch Systems and the Enoch Systems logo are trademarks or registered trademarks of Enoch Systems, LLC and/or its affiliates in the U.S. and other countries.
Third-party trademarks mentioned are the property of their respective owners. All rights reserved.

AC-KIT-888HD Audio Module
Page i
IEI Technology Corp.
User Manual
MODEL:
AC-KIT-888HD
7.1 Channel High Definition Audio Module
Rev. 1.00 – 15 June, 2011

AC-KIT-888HD Audio Module
Page ii
Revision
Date Version Changes
15 June, 2011 1.00 Initial release

AC-KIT-888HD Audio Module
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

AC-KIT-888HD Audio Module
Page iv
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 FEATURES................................................................................................................... 3
1.3 CONNECTORS ............................................................................................................. 3
1.4 DIMENSIONS............................................................................................................... 4
1.5 TECHNICAL SPECIFICATIONS ...................................................................................... 5
2 PACKING LIST ............................................................................................................. 6
2.1 ANTI-STATIC PRECAUTIONS ........................................................................................ 7
2.2 UNPACKING PRECAUTIONS......................................................................................... 7
2.3 PACKING LIST............................................................................................................. 8
3 CONNECTORS ............................................................................................................. 9
3.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 10
3.1.1 AC-KIT-888HD Layout .................................................................................... 10
3.1.2 Peripheral Interface Connectors ..................................................................... 10
3.1.3 Audio Connector ...............................................................................................11
3.1.4 CD In Connector.............................................................................................. 12
3.1.5 Front Panel Connector .................................................................................... 13
3.2 EXTERNAL PERIPHERAL INTERFACE CONNECTORS................................................... 14
4 INSTALLATION ......................................................................................................... 15
4.1 ANTI-STATIC PRECAUTIONS ...................................................................................... 16
4.2 INSTALLATION CONSIDERATIONS.............................................................................. 16
4.3 JUMPER SETTINGS .................................................................................................... 18
4.3.1 AVDD Power-on Select Jumper....................................................................... 19
4.3.2 DVDD Power-on Select Jumper ...................................................................... 20
4.4 CHASSIS INSTALLATION............................................................................................ 20
4.5 REALTEK HD AUDIO DRIVER (ALC888) INSTALLATION ......................................... 23
5 7.1 SURROUND SOUND CONFIGURATION ........................................................ 24
5.1 INTRODUCTION......................................................................................................... 25

AC-KIT-888HD Audio Module
Page v
5.2 DRIVER INSTALLATION ............................................................................................. 25
5.3 7.1 SURROUND SOUND CONFIGURATION .................................................................. 25
5.3.1 Accessing the Sound Effects Manager ............................................................. 25
5.3.2 7.1 Surround Sound Setup................................................................................ 27
5.3.3 Connect Devices to the Audio Module............................................................. 28
5.3.4 Testing Speaker Configuration......................................................................... 33
A HAZARDOUS MATERIALS DISCLOSURE ......................................................... 34
A.1 HAZARDOUS MAT E R I A L S DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ....................................... 35

AC-KIT-888HD Audio Module
Page vi
List of Figures
Figure 1-1: AC-KIT-888HD..............................................................................................................2
Figure 1-2: Connectors ..................................................................................................................3
Figure 1-3: AC-KIT-888HD Dimensions (mm) ..............................................................................4
Figure 3-1: Connectors and Jumpers.........................................................................................10
Figure 3-2: Audio Connector Location.......................................................................................11
Figure 3-3: CD In Connector Location........................................................................................12
Figure 3-4: Front Panel Connector Location .............................................................................13
Figure 4-1: AVDD Power-on Select Jumper Location...............................................................19
Figure 4-2: DVDD Power-on Select Jumper Location...............................................................20
Figure 4-3: Connect Audio Module to Motherboard .................................................................21
Figure 4-4: Connect Audio Module to CD ..................................................................................22
Figure 5-1: Sound Effect Manager Icon [Task Bar] ...................................................................25
Figure 5-2: Sound Effects Manager (ALC888) ...........................................................................26
Figure 5-3: 8 Channel Speaker Option .......................................................................................27
Figure 5-4: 7.1 Surround Sound Speaker Layout......................................................................28
Figure 5-5: Connected Device Screen........................................................................................29
Figure 5-6: Front Speakers as Front Speaker Out ....................................................................30
Figure 5-7: Side Speakers as Side Speaker Out........................................................................31
Figure 5-8: Rear Speakers as Rear Speaker Out.......................................................................32
Figure 5-9: Center/Subwoofer Speakers as Center/Subwoofer Speaker Out ........................33

AC-KIT-888HD Audio Module
Page vii
List of Tables
Table 1-1: AC-KIT-888HD Specifications......................................................................................5
Table 2-1: Packing List...................................................................................................................8
Table 3-1: Peripheral Interface Connectors ...............................................................................10
Table 3-2: Audio Connector Pinouts ..........................................................................................11
Table 3-3: CD In Connector Pinouts ...........................................................................................12
Table 3-4: Front Panel Connector Pinouts.................................................................................14
Table 3-5: External Peripheral Interface Connectors................................................................14
Table 4-1: Jumpers.......................................................................................................................18
Table 4-2: AVDD Power-on Select Jumper Settings .................................................................19
Table 4-3: DVDD Power-on Select Jumper Settings .................................................................20

AC-KIT-888HD Audio Module
Page 1
Chapter
1
1Introduction

AC-KIT-888HD Audio Module
Page 2
1.1 Introduction
Figure 1-1: AC-KIT-888HD
The AC-KIT-888HD audio module is an audio interface card equipped with 7.1 surround
sound capability. The AC-KIT-888HD audio module features a performance Realtek
ALC888 audio codec chip, five input/output audio jacks, direct CD in header connection
and optional I/O KIT multi-streaming pin header connection. With IEI’s leading-edge
technology and professionalism in industrial computing, the AC-KIT-888HD audio module
is designed with high stability and state-of-the-art functionality to fulfill your needs.

AC-KIT-888HD Audio Module
Page 3
1.2 Features
Some of the AC-KIT-888HD audio module features are listed below:
Realtek ALC888 HD Audio Codec IC Supported
Five audio jacks for microphone, 7.1+2 Channel High Definition Audio input
and output
High-performance 7.1+2 Channel High Definition Audio board are providing
7.1 sound playback and multiple streaming through the front panel stereo
outputs
Digital to Analog Converter (DAC) with 97dB signal to noise ratio (SNR)
Analog to Digital Converter (ADC) with 90dB signal to noise ratio (SNR)
All DACs support 44.1k/48k/96k/192kHz sample rate
All ADCs support 44.1k/48k/96kHz sample rate
Driver supports Windows 2000/2003/XP/VISTA/7 (32/64 bits),
Linux (Ubuntu or Debiant)
1.3 Connectors
The connectors on the AC-KIT-888HD are shown in the figure below.
Figure 1-2: Connectors

AC-KIT-888HD Audio Module
Page 4
1.4 Dimensions
The main dimensions of the AC-KIT-888HD are shown in the diagram below.
Figure 1-3: AC-KIT-888HD Dimensions (mm)

AC-KIT-888HD Audio Module
Page 5
1.5 Technical Specifications
AC-KIT-888HD technical specifications are listed below.
Specification/Model AC-KIT-888HD
Audio Codec IC Realtek ALC888
Audio Input Five Audio jacks
CD pin header connector on-board
Sampling Rate DACs support 44.1k/48k/96k/192kHz
ADCs support 44.1k/48k/96kHz
16/20/24-bit S/PDIF-OUT supports 44.1k/48k/96k/192kHz
16/20/24-bit S/PDIF-IN supports 44.1k/48k/96kHz
7.1 Surround Sound Yes
Two Multi-streaming Channels Yes (with optional IO-KIT-MULTI-ST card)
Device Driver Audio driver for Windows 2000/XP/Vista/7
Table 1-1: AC-KIT-888HD Specifications

AC-KIT-888HD Audio Module
Page 6
Chapter
2
2Packing List

AC-KIT-888HD Audio Module
Page 7
2.1 Anti-static Precautions
WARNING!
Static electricity can destroy certain electronics. Make sure to follow the
ESD precautions to prevent damage to the product, and injury to the
user.
Make sure to adhere to the following guidelines:
Wear an anti-static wristband: Wearing an anti-static wristband can prevent
electrostatic discharge.
Self-grounding: Touch a grounded conductor every few minutes to discharge
any excess static buildup.
Use an anti-static pad: When configuring any circuit board, place it on an
anti-static mat.
Only handle the edges of the PCB: Don't touch the surface of the
motherboard. Hold the motherboard by the edges when handling.
2.2 Unpacking Precautions
When the AC-KIT-888HD is unpacked, please do the following:
Follow the antistatic guidelines above.
Make sure the packing box is facing upwards when opening.
Make sure all the packing list items are present.

AC-KIT-888HD Audio Module
Page 8
2.3 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
AC-KIT-888HD was purchased from or contact an IEI sales
representative directly by sending an email to 36[email protected].
The AC-KIT-888HD is shipped with the following components:
Quantity Item and Part Number Image
1AC-KIT-888HD audio module c/w slot bracket
1Audio cable
(P/N: 32100-121100-RS)
1Utility CD
1Quick Installation Guide
Table 2-1: Packing List

AC-KIT-888HD Audio Module
Page 9
Chapter
3
3Connectors

AC-KIT-888HD Audio Module
Page 10
3.1 Peripheral Interface Connectors
This chapter details all the jumpers and connectors.
3.1.1 AC-KIT-888HD Layout
The figures below show all the connectors and jumpers.
Figure 3-1: Connectors and Jumpers
3.1.2 Peripheral Interface Connectors
The table below lists all the connectors on the board.
Connector Type Label
Audio connector 10-pin box header HDA-1
CD In connector 4-pin header CDIN1
Front panel connector 10-pin header FRONT-PANEL
Table 3-1: Peripheral Interface Connectors

AC-KIT-888HD Audio Module
Page 11
3.1.3 Audio Connector
CN Label: HDA-1
CN Type: 10-pin box header (2x5)
CN Location: See Figure 3-2
CN Pinouts: See Table 3-2
Use the audio connector to connect the module to a motherboard audio connector.
Figure 3-2: Audio Connector Location
PIN DESCRIPTION PIN DESCRIPTION
1 HDA_SYNC 2 HDA_BITCLK
3 HDA_SDOUT 4 HDA_PCBEEP
5 HDA_SDIN 6 HDA_RST#
7 HDA_VCC 8 HDA_GND
9 HDA_+12V 10 HDA_GND
Table 3-2: Audio Connector Pinouts

AC-KIT-888HD Audio Module
Page 12
3.1.4 CD In Connector
CN Label: CDIN1
CN Type: 4-pin header (1x4)
CN Location: See Figure 3-3
CN Pinouts: See Table 3-3
Use the CD in connector to connect the module to a CD player.
Figure 3-3: CD In Connector Location
PIN DESCRIPTION
1 CD IN LEFT
2 CD-GND
3 CD-GND
4 CD IN RIGHT
Table 3-3: CD In Connector Pinouts