IEI Technology DRPC-120-BTi User manual

DRPC-120-BTi Embedded System
Page i
User Manual
MODEL:
DRPC-120-BTi
Fanless Embedded System with Intel® Atom™ E3845 CPU,
DIN Rail Mounting Support, OLED Display or LED Indicators,
Dual GbE, USB, DIO, Serial Ports,
9V~28V DC Power Input, RoHS Compliant
Rev. 1.00 – November 20, 2014

DRPC-120-BTi Embedded System
Page ii
Revision
Date Version Changes
November 20, 2014 1.00 Initial release

DRPC-120-BTi Embedded System
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

DRPC-120-BTi Embedded System
Page iv
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 MODEL VARIATIONS ................................................................................................... 2
1.3 FEATURES................................................................................................................... 3
1.4 CONNECTOR PANEL.................................................................................................... 4
1.4.1 Front Panel ........................................................................................................ 4
1.4.2 Top Panel ........................................................................................................... 5
1.5 LED INDICATORS (DRPC-120-BTI-E5-LED ONLY).................................................. 6
1.6 PROGRAMMABLE OLED DISPLAY (DRPC-120-BTI-E5-OLED ONLY) ..................... 7
1.7 TECHNICAL SPECIFICATIONS ...................................................................................... 7
1.8 DIMENSIONS............................................................................................................. 10
2 UNPACKING................................................................................................................11
2.1ANTI-STATIC PRECAUTIONS...................................................................................... 12
2.2 UNPACKING PRECAUTIONS....................................................................................... 12
2.3 UNPACKING CHECKLIST........................................................................................... 13
3 INSTALLATION ......................................................................................................... 16
3.1 INSTALLATION PRECAUTIONS................................................................................... 17
3.1.1 High Surface Temperature ............................................................................... 17
3.2 INTERNALACCESS PANEL REMOVAL........................................................................ 18
3.3 HDD INSTALLATION................................................................................................. 18
3.4 MSATASSD INSTALLATION..................................................................................... 19
3.5 IPMI MODULE INSTALLATION (OPTIONAL).............................................................. 21
3.6 CLEAR CMOS.......................................................................................................... 23
3.7AT/ATX MODE SELECTION...................................................................................... 24
3.8 MOUNTING THE SYSTEM .......................................................................................... 24
3.9 EXTERNAL PERIPHERAL INTERFACE CONNECTORS................................................... 26
3.9.1 Digital Input/Output Terminal Block............................................................... 27
3.9.2 LAN Connectors............................................................................................... 27
3.9.3 Power Input, 3-pin Terminal Block.................................................................. 29

DRPC-120-BTi Embedded System
Page v
3.9.4 RS-232 Serial Port Connectors (COM1, COM2)............................................ 30
3.9.5 RS-422/485 Serial Port Connectors (COM3, COM4)..................................... 31
3.9.6 USB Connectors............................................................................................... 32
3.9.7 VGA Connector................................................................................................ 33
3.10 IPMI SETUP PROCEDURE ....................................................................................... 33
3.10.1 Managed System Hardware Setup ................................................................. 34
3.10.2 Using the IEI iMAN Web GUI........................................................................ 34
3.11 DRIVER INSTALLATION........................................................................................... 36
4 SYSTEM MAINTENANCE ....................................................................................... 37
4.1 SYSTEM MAINTENANCE INTRODUCTION.................................................................. 38
4.2 MOTHERBOARD REPLACEMENT ............................................................................... 38
4.3 SO-DIMM REPLACEMENT....................................................................................... 39
5 BIOS.............................................................................................................................. 41
5.1 INTRODUCTION......................................................................................................... 42
5.1.1 Starting Setup................................................................................................... 42
5.1.2 Using Setup...................................................................................................... 42
5.1.3 Getting Help..................................................................................................... 43
5.1.4 Unable to Reboot after Configuration Changes.............................................. 43
5.1.5 BIOS Menu Bar................................................................................................ 43
5.2 MAIN........................................................................................................................ 44
5.3ADVANCED............................................................................................................... 46
5.3.1 ACPI Settings................................................................................................... 47
5.3.2 Super IO Configuration ................................................................................... 48
5.3.2.1 Serial Port n Configuration....................................................................... 49
5.3.3 iWDD H/W Monitor......................................................................................... 54
5.3.3.1 Smart Fan Mode Configuration................................................................ 55
5.3.4 RTC Wake Settings........................................................................................... 57
5.3.5 Serial Port Console Redirection ...................................................................... 58
5.3.6 CPU Configuration.......................................................................................... 60
5.3.7 IDE Configuration........................................................................................... 63
5.3.8 USB Configuration........................................................................................... 64
5.4 CHIPSET ................................................................................................................... 65
5.4.1 North Bridge .................................................................................................... 66

DRPC-120-BTi Embedded System
Page vi
5.4.2 South Bridge..................................................................................................... 66
5.4.2.1 PCI Express Configuration....................................................................... 68
5.5 SECURITY................................................................................................................. 69
5.6 BOOT........................................................................................................................ 70
5.7 EXIT......................................................................................................................... 72
6 PROGRAMMING OLED FOR DRPC-120-BTI-E5-OLED................................... 74
6.1 OVERVIEW................................................................................................................ 75
6.2 OLED IMAGE EDITOR.............................................................................................. 75
6.2.1 OLED Image Editor Installation ..................................................................... 75
6.2.2 Launching the OLED Image Editor................................................................. 78
6.2.3 Function List.................................................................................................... 78
6.2.4 OLED Control.................................................................................................. 79
6.2.5 OLED Erase Page............................................................................................ 80
6.3 DRPC100 DEMO PROGRAM..................................................................................... 81
6.3.1 Dialog Menu .................................................................................................... 82
6.3.2 LCD Menu........................................................................................................ 83
6.3.3 DEMO Menu.................................................................................................... 84
7 INTERFACE CONNECTORS................................................................................... 85
7.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 86
7.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 87
7.2.1 Audio Line-out Connector (LINE_OUT1)....................................................... 88
7.2.2 Audio Mic-in Connector (MIC_IN1)................................................................ 88
7.2.3 Battery Connector (BAT1) ............................................................................... 88
7.2.4 Chassis Intrusion Connector (CHASSIE1)...................................................... 88
7.2.5 CPU Fan Connector (CPU_FAN1).................................................................. 89
7.2.6 OLED/LED Signal Connector (OLED1)......................................................... 89
7.2.7 PCIe Mini Card Slot – Full Size (M_PCIE1) .................................................. 89
7.2.8 PCIe Mini Card Slot – Half Size (MINI-PCIE1) ............................................. 90
7.2.9 SATA 3Gb/s Connector (SATA1)...................................................................... 91
7.2.10 SATA Power Connector (SATA_PWR1)......................................................... 92
7.2.11 SPI Flash Connector (JSPI1)......................................................................... 92
7.2.12 SPI Flash Connector - EC (JSPI2)................................................................ 92
7.2.13 USB Connector (USB1) ................................................................................. 93

DRPC-120-BTi Embedded System
Page vii
7.3 EXTERNAL INTERFACE PANEL CONNECTORS............................................................ 93
7.3.1 Digital I/O Terminal Block (J1)....................................................................... 94
7.3.2 Power Input Terminal Block (DC_IN1)........................................................... 94
7.3.3 RJ-45 LAN Connector (LAN1)......................................................................... 94
7.3.4 RJ-45 LAN Connector (LAN2)......................................................................... 95
7.3.5 RS-232 Serial Ports (COM1/2)........................................................................ 95
7.3.6 RS-422/485 Serial Ports (COM3/4)................................................................. 95
7.3.7 USB 2.0 Connectors (USB2)............................................................................ 96
7.3.8 USB 3.0 Connectors (USB1)............................................................................ 96
7.3.9 VGA Connector (VGA1)................................................................................... 96
A SAFETY PRECAUTIONS......................................................................................... 98
A.1 SAFETY PRECAUTIONS ............................................................................................ 99
A.1.1 General Safety Precautions............................................................................. 99
A.1.2 Anti-static Precautions .................................................................................. 100
A.1.3 Explanation of Graphical Symbols................................................................ 100
A.1.4 Product Disposal........................................................................................... 101
A.2 MAINTENANCE AND CLEANING PRECAUTIONS...................................................... 101
A.2.1 Maintenance and Cleaning............................................................................ 101
A.2.2 Cleaning Tools............................................................................................... 102
B DIGITAL I/O INTERFACE..................................................................................... 103
B.1 INTRODUCTION...................................................................................................... 104
B.2ASSEMBLY LANGUAGE SAMPLE 1.......................................................................... 105
B.3ASSEMBLY LANGUAGE SAMPLE 2.......................................................................... 105
C HAZARDOUS MATERIALS DISCLOSURE....................................................... 106
C.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................... 107

DRPC-120-BTi Embedded System
Page viii
List of Figures
Figure 1-1: DRPC-120-BTi Series..................................................................................................2
Figure 1-2: DRPC-120-BTi-E5-LED Front Panel...........................................................................4
Figure 1-3: DRPC-120-BTi-E5-OLED Front Panel........................................................................5
Figure 1-4: DRPC-120-BTi Top Panel............................................................................................6
Figure 1-5: LED Indicators of DRPC-120-BTi-E5-LED.................................................................6
Figure 1-6: Physical Dimensions (millimeters)..........................................................................10
Figure 3-1: Internal Access Panel Removal...............................................................................18
Figure 3-2: HDD Installation ........................................................................................................19
Figure 3-3: PCIe Mini Slot Location............................................................................................20
Figure 3-4: Inserting the PCIe Mini Card into the Socket.........................................................20
Figure 3-5: Securing the PCIe Mini Card....................................................................................21
Figure 3-6: IPMI Module Slot Location .......................................................................................22
Figure 3-7: IPMI Module Installation...........................................................................................22
Figure 3-8: Clear CMOS Button Location...................................................................................23
Figure 3-9: AT/ATX Switch Location...........................................................................................24
Figure 3-10: DIN Rail Mounting Bracket Installation.................................................................24
Figure 3-11: Attach the Mounting Bracket to the DIN Rail .......................................................25
Figure 3-12: Mounting the System..............................................................................................26
Figure 3-13: DIO Terminal Block Pinout Location.....................................................................27
Figure 3-14: RJ-45 Ethernet Connector......................................................................................28
Figure 3-15: 3-pin Power Terminal Block Pinout Location.......................................................29
Figure 3-16: RS-232 Serial Port Pinout Location.......................................................................30
Figure 3-17: RS-422/485 Serial Port Pinout Locations..............................................................31
Figure 3-18: VGA Connector .......................................................................................................33
Figure 3-19: IEI iMAN Web Address............................................................................................34
Figure 3-20: IEI iMAN Web GUI....................................................................................................35
Figure 4-1: SO-DIMM Module Location.......................................................................................39
Figure 4-2: SO-DIMM Module Installation...................................................................................40
Figure 6-1: OLED Image Editor Setup Wizard ...........................................................................76
Figure 6-2: Select Installation Folder..........................................................................................76

DRPC-120-BTi Embedded System
Page ix
Figure 6-3: Confirm Installation ..................................................................................................77
Figure 6-4: Installation Complete................................................................................................77
Figure 6-5: OLED Image Editor ...................................................................................................78
Figure 6-6: Function List..............................................................................................................78
Figure 6-7: OLED Control ............................................................................................................79
Figure 6-8: OLED Erase Page......................................................................................................80
Figure 6-9: DR100 Demo Program Main Menu ..........................................................................81
Figure 6-10: Dialog Menu.............................................................................................................82
Figure 6-11: LCD Menu ................................................................................................................83
Figure 6-12: DEMO Menu.............................................................................................................84
Figure 7-1: Main Board Layout Diagram (Front Side)...............................................................86
Figure 7-2: Main Board Layout Diagram (Solder Side).............................................................86

DRPC-120-BTi Embedded System
Page x
List of Tables
Table 1-1: DRPC-120-BTi Model Variations .................................................................................2
Table 1-2: DRPC-120-BTi-E5-LED LED Definitions .....................................................................7
Table 1-3: Technical Specifications..............................................................................................9
Table 3-1: DIO Terminal Block Pinouts ......................................................................................27
Table 3-2: LAN1 Pinouts ..............................................................................................................28
Table 3-3: LAN2 Pinouts ..............................................................................................................28
Table 3-4: RJ-45 Ethernet Connector LEDs...............................................................................28
Table 3-5: 3-pin Power Terminal Block Pinouts ........................................................................29
Table 3-6: RS-232 Serial Port Pinouts ........................................................................................30
Table 3-7: RS-422/485 Serial Port Pinouts .................................................................................31
Table 3-8: USB 2.0 Port (USB3/USB4) Pinouts..........................................................................32
Table 3-9: USB 3.0 Port (USB1/USB2) Pinouts..........................................................................32
Table 3-10: VGA Connector Pinouts...........................................................................................33
Table 5-1: BIOS Navigation Keys................................................................................................43
Table 7-1: Peripheral Interface Connectors...............................................................................87
Table 7-2: Audio Line-out Connector (LINE_OUT1) Pinouts....................................................88
Table 7-3: Audio Mic-in Connector (MIC_IN1) Pinouts.............................................................88
Table 7-4: Battery Connector (BAT1) Pinouts...........................................................................88
Table 7-5: Chassis Intrusion Connector (CHASSIE1) Pinouts.................................................88
Table 7-6: CPU Fan Connector (CPU_FAN1) Pinouts...............................................................89
Table 7-7: OLED/LED Signal Connector (OLED1) Pinouts.......................................................89
Table 7-8: PCIe Mini Card Slot – Full Size (M_PCIE1) Pinouts.................................................90
Table 7-9: PCIe Mini Card Slot – Half Size (MINI-PCIE1) Pinouts ............................................91
Table 7-10: SATA 3Gb/s Connector (SATA1) Pinouts ..............................................................91
Table 7-11: SATA Power Connector (SATA_PWR1) Pinouts...................................................92
Table 7-12: SPI Flash Connector (JSPI1) Pinouts.....................................................................92
Table 7-13: SPI Flash Connector - EC (JSPI2) Pinouts.............................................................92
Table 7-14: USB Connector (USB1) Pinouts..............................................................................93
Table 7-15: Rear Panel Connectors............................................................................................93
Table 7-16: Digital I/O Terminal Block (J1) Pinouts ..................................................................94

DRPC-120-BTi Embedded System
Page xi
Table 7-17: Power Input Terminal Block (DC_IN1) Pinouts......................................................94
Table 7-18: RJ-45 LAN Connector (LAN1) Pinouts ...................................................................94
Table 7-19: RJ-45 LAN Connector (LAN2) Pinouts ...................................................................95
Table 7-20: RS-232 Serial Port (COM1/2) Pinouts .....................................................................95
Table 7-21: RS-422/485 Serial Port (COM3/4) Pinouts ..............................................................95
Table 7-22: USB 2.0 Connectors (USB2) Pinouts......................................................................96
Table 7-23: USB 3.0 Connectors (USB1) Pinouts......................................................................96
Table 7-24: VGA Connector (VGA1) Pinouts .............................................................................97
DRPC-120-BTi

DRPC-120-BTi Embedded System
Page 1
Chapter
1
1 Introduction

DRPC-120-BTi Embedded System
Page 2
1.1 Overview
Figure 1-1: DRPC-120-BTi Series
The DRPC-120-BTi fanless embedded system is powered by the Intel® Atom™ E3845
processor. It is designed for harsh environment applications, and supports DIN rail
mounting method.
The DRPC-120-BTi accepts a wide range of DC power input (9 V ~ 28 V), allowing it to be
powered anywhere. Two USB 3.0, two USB 2.0, two GbE, two RS-232, two RS-422/485,
and one 8-bit DIO provide rich I/O options for various applications.
1.2 Model Variations
The model variations of the DRPC-120-BTi are listed below.
Model No. Indicators
DRPC-120-BTi-E5-LED/2G LED
DRPC-120-BTi-E5-OLED/2G OLED
Table 1-1: DRPC-120-BTi Model Variations

DRPC-120-BTi Embedded System
Page 3
1.3 Features
The DRPC-120-BTi features are listed below:
1.91 GHz quad-core Intel® Atom™ E3845 processor
Low power consumption
Fanless design
DIN rail mounting support
Preinstalled one 2 GB DDR3L SO-DIMM (system max. 8 GB)
Supports one mSATA and one 2.5” SATA HDD
Wide range DC power input (9 V ~ 28 V)
Extended temperature fanless design supports -20C ~ 60C (with SSD)
Two PCIe Mini card slots
Serial interfaces with isolation protection
8-bit digital IO (4-bit output, 4-bit input)
Supports two GbE, two USB 3.0, two USB 2.0, two RS-232 and two
RS-422/485
LED indicators (DRPC-120-BTi-E5-LED only)
Programmable OLED display (DRPC-120-BTi-E5-OLED only)
RoHS compliant

DRPC-120-BTi Embedded System
Page 4
1.4 Connector Panel
1.4.1 Front Panel
The DRPC-120-BTi front panel contains:
2 x RJ-45 Gigabit LAN ports
2 x RS-232 serial ports with isolation
2 x RS-422/485 serial ports with isolation
2 x USB 3.0 ports
2 x USB 2.0 ports
LED or OLED indicators
Function keys (DRPC-120-BTi-E5-OLED only)
The overview of the front panels of both model are shown in Figure 1-26and Figure 1-3.
Figure 1-2: DRPC-120-BTi-E5-LED Front Panel

DRPC-120-BTi Embedded System
Page 5
Figure 1-3: DRPC-120-BTi-E5-OLED Front Panel
1.4.2 Top Panel
The DRPC-120-BTi top panel contains:
1 x 8-bit digital I/O (Phoenix terminal block, 4-bit input/4-bit output)
1 x 9 V ~ 28 V DC power terminal block
1 x AT/ATX power switch
1 x HDMI connector
1 x Power button
1 x Reset button
1 x VGA connector
An overview of the top panel is shown in 6Figure 1-4 below.

DRPC-120-BTi Embedded System
Page 6
Figure 1-4: DRPC-120-BTi Top Panel
1.5 LED Indicators (DRPC-120-BTi-E5-LED Only)
The LED indicators on the front panel of the DRPC-120-BTi-E5-LED are shown in
Figure 1-5.
Figure 1-5: LED Indicators of DRPC-120-BTi-E5-LED
All the LED definitions are listed in Table 1-2.
LED Color Status Description
On System power is on
POWER Red
Off System power is off
HDD Green Blinking Storage device accessing

DRPC-120-BTi Embedded System
Page 7
Off Storage device not accessing
On COM port is transmitting data
COM TX 1~4 Yellow
Off COM port is not transmitting data
On COM port is receiving data
COM RX 1~4 Green
Off COM port is not receiving data
On Active
DIO DI 1~4* Yellow
Off Inactive
On Active
DIO DO 1~4* Green
Off Inactive
*When the DIO is set to pull-high, the DIO LED indicators always light up.
When the DIO is set to pull-low, the DIO LED indicators are always off.
Table 1-2: DRPC-120-BTi-E5-LED LED Definitions
1.6 Programmable OLED Display (DRPC-120-BTi-E5-OLED Only)
For programming the OLED display on the front panel of the DRPC-120-BTi-E5-OLED,
refer to Chapter 6.
1.7 Technical Specifications
The DRPC-120-BTi technical specifications are listed in Table 1-3.
Specifications
System
CPU (SoC) 1.91 GHz quad-core Intel® AtomE3845 processor
Memory One 2 GB 204-pin DDR3L SO-DIMM preinstalled
(system max. 8 GB)
Ethernet Controller One Intel® I210 GbE controller
One Intel® I211 GbE controller
Wireless 802.1b/g/n 1T1R (optional)
IPMI iRIS-2400 IPMI module (optional)
Supported OS Microsoft Windows 8,
Microsoft Windows Embedded Standard 7

DRPC-120-BTi Embedded System
Page 8
Specifications
Storage
HDD One 2.5” SATA 3Gb/s HDD/SSD bay
mSATA One PCIe Mini full-size card slot for mSATA module
(SATA 3Gb/s)
I/O and Indicators
Ethernet 2 x RJ-45 ports
RS-232 2 x DB-9 serial ports with 3KV isolation protection
RS-422/RS-485 2 x DB-9 serial ports with 3KV isolation protection
USB 2 x USB 3.0 ports
2 x USB 2.0 ports
Display Supports resolution up to 1920 x 1200
1 x VGA port
1 x HDMI port
Digital I/O 1 x Phoenix terminal block (8-bit, 4-bit input/4-bit output)
Interior Expansion 1 x PCIe Mini full-size card slot (co-lay mSATA)
1 x PCIe Mini half-size card slot (reserved for optional
Wi-Fi module)
Indicators LED (for DRPC-120-BTi-E5-LED)
OLED (for DRPC-120-BTi-E5-OLED)
Buttons Power button
Reset button
Power
Power Input 9 V ~ 28 V DC (3-pin terminal block)
Power Consumption [email protected] (1.91 GHz quad-core Intel® Atom™ E3845
processor with 2 GB memory)
AT/ATX Mode AT/ATX switch
Environmental and Mechanical
Mounting DIN rail, desktop