IFM efector 200 OGP2 Series User manual

Operating instructions
Retro-reflective sensor
OGP2xx
OGP200 / 00
UK
UK

2
Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switched signal.
Range (r): see type label.
Installation
1
LED
Place prismatic reflector or reflective tape behind the object to be detected. Align
the photocell and fasten it to a mounting bracket.
Maximum range is only achieved with precise alignment.
Electrical connection
Disconnect power before connecting the unit as follows:
L+
L
1
4
3
Operation
Check the safe functioning of the sensor.
Units with dark-on mode (OGP-DPKG): The output is switched / the yellow LED
is lit when an object is present.
Units with light-on mode (OGP-HPKG): The output is switched / the yellow LED
is lit when no object is present.
1:
•
•

3
UK
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use any solvents
or cleaning agents which could damage the plastic lenses.