Igloohome Key Fob User manual

1
Version 0.1 03/21
User guide
Key Fob

As our igloohome app is frequently updated, there may be changes to this manual.
Please refer to our website igloohome.co/support for the latest version of the manual.
Welcome!
This guide will get you up and running with your igloohome Key Fob.
In the meantime, you should follow igloohome on Facebook and Youtube!
Visit ourYoutubeLike us on Facebook

Table of Contents
What’s Included 4
Specifications 5
Lock Anatomy 6
Features 7
Replacing Batteries 8
App Onboarding 9
Installation Instructions 10
Unlocking 11
Locking 12
Compatible igloohome Locks 13
LED Indications 14
Troubleshoot 15

4
What’s Included
Mounting Bracket
Adhesive Tape
Key Fob
CR2032 Coin Cell Battery
Screw & Screw Anchor

5
Specifications
Model igloohome Key Fob
Battery Type CR2032 Coin Cell Battery
Battery Life Up to 2 Years
Operation Temp -25°C to 45°C *
IP Rating IP54
Body Material ABS, PC
Weight Net: TBC, Gross: TBC
Front Side
68mm
39mm 18.6mm
32mm 13mm
NOTE: This product functions best with Panasonic CR2 Lithium batteries.
Do not use rechargeable, heavy-duty or other battery types.
For damage resulting from incorrect use of fob, use of fob in potentially explosive
environments, or use of fob outside of stipulated specifications, the customer bears sole
responsibility. igloohome accepts no liability whatsoever.
*NOTE: Battery reading at sub-zero temperatures might be inaccurate.
For best performance, please use product above 0 degrees Celsius.

6
Fob Anatomy
Battery
Cover
Key Fob
Lock/
Unlock
Button
Coin
Battery
Settings
Button
LED Indicator
Settings LED
Indicator
Mounting Bracket
Adhesive
Tape

7
Features
Unlock Function
Click the button to unlock.
Lock / Unlock
Access on your terms
Low Battery Indicator
Pair multiple Key Fobs to your lock.
Each Key Fob can be paired with up
to 199 locks and unlocks a maximum
of 5 paired locks within range
simultaneously.
An intuitive LED visual alert will prompt
you to change the batteries when it
runs low.
Compatible across multiple locks
The Key Fob is compatible with
selected igloohome locks.
*Selected lock models are listed in
specifications.
Others
Battery Life
The Fob can last up to 2 years with
CR2 lithium battery.
Battery
Lock Function
Hold the button down for two seconds
to lock.

8
Replacing Batteries
Remove the battery cover from the fob
by sliding it upwards.
Please ensure that the battery
cover is closed tightly.
Replace the CR2032 Coin Battery. Close the battery cover by sliding it
downwards.
Push the CR2032 Coin Battery upwards
to remove it from the battery slot.

9
App Onboarding
2
3
Register as a Lock User
a) Download igloohome from the App Store / Play Store
b) Create an account and login
Pairing
a) Select [Add new igloohome lock]
Note: For existing users with other paired locks, go
to [Configuration], select [Add Locks] and follow the
instructions.
Adding the Key Fob
Go to [Configuration], select [Manage fobs],
and click on the [+] sign at the top right corner
and follow the instructions.

10
Installation Instructions
Using Adhesive
Using Screw
a
1. Peel o the protective layers on both sides of the provided adhesive.
2. Stick one side onto the back of the mounting bracket, and the
other side onto the wall near your igloohome locks*
1. With the provided screw and screw anchor, drill the mounting
bracket into the wall near your igloohome locks*
* NOTE: Please ensure that the key fob can unlock your igloohome locks at
the position where you are placing the mounting bracket on.
b
Peel
Open
Stick on the
adhhesive

11
Unlocking
Unlock
a
1. Press the button on the key fob. LED indicator on the key fob
will start flashing blue
2. Paired locks within range (up to 5) will unlock, and the LED
indicator will turn green

12
Locking
Lock
a
1. Press and hold the button on the key fob for more than
2 seconds. LED indicator on the key fob will start flashing blue
2. Paired locks within range (up to 5) will lock, and the LED
indicator will turn green

13
Compatible igloohome Locks
Lock Maximum Key Fob to lock distance*
Metal Gate Rim Lock Less than 8m
Mortise 2/2+ Less than 10m
Deadbolt 2S Metal Grey Less than 8m
Keybox 3 Less than 4m
Padlock Less than 1.5m
Other older lock models
If your lock model is not shown here,
please contact our support team for more
information on Key Fob compatibility.
*NOTE: The distances provided are for reference only and will vary based on actual operating
conditions such as physical obstacles and interference from other electronic devices.

14
LED indications
Pairing in progress
Paired successful
Error/No lock found
Successful unlock/lock
some locks only (not all)
Red LED for 4 seconds
Fast blink Blue LED
Green LED for 4 seconds
Blue LED for 4 seconds
Very fast blink Blue LED
Slow breathing Red LED
None
None
None
Blue LED for 4 seconds then
a slow blink
Alternate Red and
Green LED for 4 seconds
None
None
None
None
None
Actions LED Indications
Pairing / Settings mode
(Timeout = 50 sec)
Low Battery (only when
unlocking/locking)
Searching for lock
to connect and unlock
Successful unlock/
lock all locks
Slow flash Blue LED
Settings LED Indications
Hard Reset / Unpair
Power Start Up Blue LED for 1 second
None
None

15
Troubleshoot
I lost my Key Fob Unlock is not working
• In the igloohome app, Go to “Manage fobs” >
Choose your fob > Choose “Delete Fob” > “I lost
my fob”
• Follow on-screen instructions to revoke access*
to the locks linked to the Fob and delete the Fob
from your account
• The fob is now disabled and will not unlock your
igloohome locks
• Should you find your fob after these steps
are done, please contact the support team in
resetting your fob
• Check that the locks you are unlocking are
already linked to your fob in the app
• Check that the settings LED (under the battery
cover) is not flashing blue
• Ensure that the fob is within Bluetooth range of
the locks (for optimal performance, please ensure
you are within 5m of the locks and there are no
obstructions between the fob and the locks)
• Check that the locks you are unlocking are not
low in battery

16
Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 5mm between the radiator and your body.

17
For enquiries go to:
igloohome.co/support