Igloohome Padlock. User manual

1Version 0.1 03/19
User guide
Padlock.

As our igloohome app is frequently updated, there may be changes to this manual.
Please refer to our website igloohome.co/support for the latest version of the manual.
Welcome!
This guide will get you up and running with your igloohome Smart
Padlock. In the meantime, you should follow igloohome on Facebook
and Youtube!
Visit our YoutubeLike us on Facebook

Table of Contents
What’s Included 4
Specifications 5
Features 6
Replacing Batteries 8
App Onboarding 10
Managing Access in App 11
Unlocking 12
Locking 13
Lock Behaviour 14
9V Jumpstart 15
Audio and LED Indications 16
Troubleshoot 17

4
What’s Included
Padlock T27 Torx Security Screwdriver
CR2 Lithium Battery QR Code Stickers x3

5
Specifications
Model igloohome Smart Padlock
Battery Type CR2 Lithium Battery
Battery Life Up to 1 Year
Emergency Power 9V Alkaline Battery
Operation Temp -20°C to 50°C
Storage Temp -30°C to 60°C
IP Rating IP66
Body Material Zinc Alloy
Shackle Material Hardened Steel
Weight Net: 450g, Gross: 550g
Unlock Mechanism Bluetooth, PIN code
Front
NOTE: This product functions best with Panasonic CR2 Lithium batteries. Do not use
rechargeable, heavy-duty or other battery types. Please note that using recommended
battery brands such as Panasonic, Duracell, or Energizer will improve the performance and
lifespan of the lock.
For damage resulting from incorrect use of lock, use of lock in potentially explosive
environments, or use of lock outside of stipulated specifications, the customer bears sole
responsibility. igloohome accepts no liability whatsoever.
Side

6
Features
Bluetooth Master Key
The igloohome Smart Padlock unlocks
with Bluetooth via the app.
Master PIN Code
The igloohome Smart Padlock unlocks
with a permanent Master PIN Code.
User PIN Code
The igloohome mobile app can
generate multiple types of User Pin
codes, e.g. One-Time, Permanent &
Duration.
PIN / Bluetooth Unlock
Low Battery Indicator
The Status Indicator shows red light
when battery level is 20% and below,
followed by a sound alert when the
keypad is woken up. The battery level
can also be monitored on the app and
is updated during Bluetooth Unlock.
Battery Life
The Padlock can last up to 1 year
with CR2 lithium battery.
Battery
Emergency Jump Start
If battery power is drained, an
external 9 Volt battery can be used
to provide emergency power. The
terminals of the 9V battery must
be in contact with the Jump Start
contact points of the Padlock as
shown in page 15.
Bluetooth Guest Key
The igloohome mobile app can
generate and share Bluetooth keys
(based on duration with guests to
unlock the Smart Padlock.

7
Features
Auto Relock
Weather Resistant
The Padlock relocks automatically
when shackle is closed. User can
deactivate auto-relock function if
they prefer manual relock.
The padlock is able to withstand
weather conditions with protection
against dust and water (IP66).
Keypad Security Lockout
Lock will dissallow any PIN entries
and sound an alarm when there is
a number of incorrect PIN attempt.
User can configure number of
incorrect attempts to trigger
timeout.
Others
Masking Security Code
Protective Rubber Bumper
A total of 16 digits including the
masking digits can be entered to
prevent the PIN code from being
exposed.
Prevent bumping on hard surfaces
with the rubber bumper as a
padding on the back.

8
Replacing Batteries
1. Unlock the Padlock and pull the
shackle to open position.
2. Turn Torx cap clockwise 90° with the
Torx Screwdriver & push battery cover
out.

9
3. Replace the CR2 Battery, close
battery cover and turn Torx cap
counter-clockwise 90°.
4. Push the shackle to close position to
auto-relock or manual relock.

10
App Onboarding
In the factory mode (before pairing), the PIN to unlock the lock is 1 2 3 4 5 6 7 8 9 0
Test Factory PIN Unlock
2Register as a Lock User
a) Download igloohome from the App Store / Play Store
b) Create an account and login
3Pairing
a) Select [Add new igloohome lock]
Note: For existing users with other paired locks, go
to [Configuration], select [Add Locks] and follow the
instructions.
Setting Master PIN Code
4
Before proceeding, turn on your Bluetooth and ensure that you are within Bluetooth range
of the lock.
Go to [Access] and customize your [Master PIN] by editing it.

11
Managing Access in App
PIN codes can be generated on the app under [Access], press [+ Access] and choose either
One-Time, Permanent or Duration PIN.
Pin codes will expire if its not use within its activation period. Refer to the table below.
Note: Duration PIN code end times can be customised within a 28-day timeframe. Past this
timeframe, the end time will automatically be configured to the start time.
Creating PIN codes
2Bluetooth Guest Key
PIN Type Use PIN within*
Permanent PIN 24 hrs of generation
One-Time PIN 24hrs of generation
Duration PIN 24hrs from the start time
Bluetooth Guest Key can be shared with other users for mobile access. It allows your guests
to unlock the igloohome smart lock via Bluetooth.
There are 3 steps to using a Shared Bluetooth Key
1. Under [Access], press [+ Access] and choose [Bluetooth Key] under
[Access Type]. Proceed to share the key after it is created.
2. Guest receives the Bluetooth Key by one of these methods:
• Clicking the URL given and follow the instructions.
• Claiming Bluetooth Key under [Configuration].
3. Guest can now use the Bluetooth Key under the Guest Bluetooth Key Section
whenever he/she is within range of the lock.
Notes:
• The owner can revoke the Bluetooth Key in App.
• Bluetooth Key must be accepted within 1 hour generation before it expires.

12
Unlocking
Bluetooth Unlock
a
1. Open your igloohome app
2. Tap on the “Bluetooth Unlock” button
3. The status indicator will flash green twice with 4 short
ascending tone once unlocked.
PIN Code
b
1. Press any button on the keypad to wake device up
2. Key in a valid PIN code (with or without masking pins)
followed by the “Unlock Icon”
3. The status indicator will flash green twice with 4 short
ascending tone once unlocked.
Padlock
Home

13
Auto Relock
a
Simple close the shackle in place and
Status Indicator will show green with a
long beep.
Manual Relock
b
Press and hold the Unlock icon on the bottom
right of the keypad for 2 seconds until the
status indicator will show green with a long
beep.
Note: Used when Auto Relock is “O”
Locking

14
Note: User is able to Enable and Disable Keypad Security Lockout via Bluetooth.
1st Time
2nd Time
3rd and
Consecutive Time
30 Sec
60 Sec
90 Sec
1 Min
5 Min
10 Min
Triggered Security Alarm Keypad Lockout
5 consecutive PIN Code attempts by default
(Configurable via Bluetooth)
Keypad Security Lockout
After 1 / 5 / 10 Minutes
or
Master / Guest Bluetooth Unlock
Single flash White LED on keypad and Red LED
on status indicator when keypad is triggered.
Please refer to table below.
Triggered by
Disable By
Behaviour
Duration
Lock Behaviour

15
9V Jumpstart
9V Jumpstart Feature
1. Touch and hold the battery contacts against the 9V jumpstart pin on the lock.
2. While holding the 9V battery to the jumpstart, press in PIN code on the keypad
followed by or Bluetooth Key to unlock.
9V
9V
9V
Please ensure terminals of the 9V battery are in contact with
the Jump Start contact points of the Padlock for 2 seconds
to activate the padlock.

16
Audio and LED indications
Bluetooth Connection
Successfully Unlocked
Successfully Locked
Incorrect PIN
Deleted PIN
Obstruction Alarm
Security Lockout
Alarm
Security Lockout
Deactivated
Low Battery Alert
Hard Reset / Unpair
Power Start Up
Status indicator flashes Blue
Ascending 4 fast tones after unlocked
and flash Green LED 2 times
1 long beep after Padlock is locked and
Green LED for 2 seconds
4 short beeps and flash Red 2 times
3 sets of 4 short beeps and flash Red 2 times
6 sets of 4 short beeps
Low - High siren for 30 / 60 / 90 seconds
2 long beeps
Descending 3 fast tones when keypad is woken
up and breathing Red LED
Descending 4 slow tones
2 slow beeps then 2 quick beeps
Actions Indications

17
Troubleshoot
I am unable to close the shackle
to lock the padlock.
• Do an unlock via PIN code or Bluetooth and try
to close the shackle again.
• Note that you might accidentally lock the
padlock manually by holding the UNLOCK
button for 2 seconds when the padlock is open.
• Make sure the Padlock is unlocked before you
turn the Torx cap, to remove the batter cover.
• Note that the Torx cap cannot be turned while
the Padlock is locked.
I am unable to turn the Torx Cap to
remove the battery cover.
• Keypad Security Lockout is triggered on the
Padlock.
• Please refer to page 14.
The padlock keypad flashes white
and LED indicator flashes red when I
activate the keypad.
• Please ensure terminals of the 9V battery are in
contact with the Jump Start contact points of the
Padlock for 2 seconds to activate the padlock.
• The 9V Battery terminals must be in constant
contact with the padlock 9V contact pins while
unlocking it with PIN code or Bluetooth.
I tried to use a 9V Battery to
jumpstart the lock but unable to.
• Do a Bluetooth Unlock or sync and try again.
• Make sure that the generated PIN codes are
activated within the activation period before it
expired.
I have generated my PINs from the
app but it cannot work.
• The Padlock is low in battery.
• Use an Alkaline 9V Battery to jumpstart the
lock and unlock the Padlock to replace the
batteries.
• Refer to page 8 to know how to replace
batteries.
I tried to unlock the Padlock but
the keypad went o and came
back on with 2 slow and 2 quick
beeps.
• The Padlock’s battery is flat.
• Use an Alkaline 9V Battery to jumpstart the lock
and unlock the Padlock to replace the batteries.
• Refer to page 8 to know how to replace batteries.
The lock is not responding at all.
• Use the spare QR sticker that is provided in the
Padlock box.
I can’t scan the QR sticker as it is
worned out.
• Make sure Auto Relock is ON via the
igloohome mobile app.
• If Auto Relock is ON and the padlock is
still not working, try to lock the padlock
manually by holding the UNLOCK button for
2 seconds.
I closed the shackle but the padlock
did not relock automatically.

18
For enquiries go to:
igloohome.co/support