IKEA UTDRAG User manual

ԡ/
4(
1)
UTDRAG

3
0LQPP
0LQPP
0LQPP
0LQPP
2x
I
1x
F
2x
B
8AA-725973-1
1x
1x
C
1x
B
A
1x 3x 4x
1x
D E
1x
1x
1x
1x
4x
4x4x
A
D
C
GH
4x
1x
A
D
B
C
AA
BB
CC
DD
4321
TOLERANCE CLASSES
ISO 2768-1
GENERAL TOLERANCE LINEAR DIMENSION Created by
Palazzi, Walter
0.5-3 3-6 6-30 30-120 120-400 400-1000 1000-2000
FINE -0.05 0.05 0.1 0.15 0.2 0.3 0.5 Creation date
09-Oct-2015 12:14
MEDIUM X0.1 0.1 0.2 0.3 0.5 0.8 1.2
COARSE -0.2 0.3 0.5 0.8 1.2 2 3
Modif.by
VERY COARSE -- 0.5 1 1.5 2.5 4 6
Do not get quotas from the drawing do not bring modifications without authorization of techincal office.
According to the law we reserve the own of the present drawing with reproduction prohibition partial or total.
Modification description Doc.Type ASSEM
Denomination
EXPLODE IKEA
Approved by
Approval date
Material
-
Thickness
-
Weight
Kg 20.584
Doc. status
Drawing N.
LIB
Rev
01
Lang EN
Scale 3:20 Form A4 Sheet 1 /1
1x
N
L
1x
0LQPP
0LQPP
0LQPP
0LQPP
Applicable for Indonesia
650
Applicable for Korea

4
30 AA-725532-7
30 AA-725532-7
30 AA-725532-7
2
1345
21
23
6x
23
6x
Ø 6
20 AA-725532-7
G
[
'
[
%

5
9
1x
1x
6x 6x
Ø 5 mm
9
1x
1x
6x 6x
Ø 5 mm
9
1x
1x
6x 6x
Ø 5 mm
I

ENGLISH 7
2
1345
For the IKEA appointed
Authorized Service Centre,
please refer to www.IKEA.com
and select your local store for
phone numbers and opening
times

7 ENGLISH
Contents
Safety information 7
Product description 11
Care and cleaning 12
What to do if... 14
Technical data 15
Environment concerns 16
IKEA GUARANTEE 16
Safety information
For your safety and correct operation of the appliance, read
this manual carefully before installation and use. Look
carefully at the warning images at the beginning of this
manual. For a correct and complete installation, refer to the
specific installation manual supplied with the product. Always
keep these instructions with the appliance even if you move or
sell it. Users must fully know the operation and safety features
of the appliance.
The wire connection has to be done by specialized
technician.
• The manufacturer will not be held liable for any damages
resulting from incorrect or improper installation.
• The minimum safety distance between the cooker top and
the extractor hood is: for electrical hob 500mm and for gas
hob 650mm.
• Only applicable for Korea
The minimum safety distance between the cooker top and
the extractor hood is: for electrical hob and for gas hob
650mm.
• If the instructions for installation for the gas hob specify a
greater distance, this must be respected.
• Check that the mains voltage corresponds to that indicated
on the rating plate fixed to the inside of the hood.
• Means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.

8 ENGLISH
• For Class I appliances, check that the domestic power supply
guarantees adequate earthing.
• Connect the extractor to the exhaust flue through a pipe of
minimum diameter 120 mm. The route of the flue must be as
short as possible.
• Do not connect the extractor hood to exhaust ducts carrying
combustion fumes (boilers, fireplaces, etc.).
• If the extractor is used in conjunction with non-electrical
appliances (e.g. gas burning appliances), a sufficient degree
of aeration must be guaranteed in the room in order to
prevent the backflow of exhaust gas. When the cooker hood
is used in conjunction with appliances supplied with energy
other than electric, the negative pressure in the room must
not exceed 0,04 mbar to prevent fumes being drawn back
into the room by the cooker hood.
• The air must not be discharged into a flue that is used for
exhausting fumes from appliances burning gas or other
fuels.
• If the supply cord is damaged, it must be replaced from the
manufacturer or its service agent.
• Connect the plug to a socket complying with current
regulations, located in an accessible place.
• With regards to the technical and safety measures to be
adopted for fume discharging it is importat to closely follow
the regulations provided by the local authorities.
WARNING: Before installing the Hood, remove the
protective films.
• Use only screws and small parts in support of the hood.
WARNING: Failure to install the screws or fixing device in
accordance with these instructions may result in electrical
hazards.
• Connect the hood to the power net by using a bipolar switch
having a contact gap of at least 3 mm.

9 ENGLISH
• Do not look directly at the light through optical devices
(binoculars, magnifying glasses…).
• Do not flambè under the range hood; risk of fire.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Children should be supervised to ensure that they do not
play with the appliance.
• The appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction
Accessible parts may become hot when used with cooking
appliances.
• Clean and/or replace the Filters after the specified time
period (Fire hazard).
• There shall be adequate ventilation of the room when the
range hood is used at the same time as appliances burning
gas or other fuels (not applicable to appliances that only
discharge the air back into the room).
• Use only with self-shielded tungsten halogen lamps or
self-shielded metal halide lamps.
• Replace any cracked shield.

10 ENGLISH
Use
• Switch off or unplug the appliance
from the mains supply before
carrying out any maintenance work.
• The top of the hood must not to be used
as a shelf.
• The extractor hood has been
designed exclusively for domestic
use to eliminate kitchen smells.
• Never use the hood for purposes
other than for which it has been
designed.
• Never leave high naked flames under
the hood when it is in operation.
• Adjust the flame intensity to direct
it onto the bottom of the pan only,
making sure that it does not engulf
the sides.
Deep fat fryers must be continuously
monitored during use: overheated oil
can burst into flames.
Installation modes
The hood has been designed to be installed
and used either as a “Exhaust mode”, or as
a “Recirculation mode”.
9
min 471 mm
max 861 mm
min 569 mm
max 861 mm
min 471 mm
max 861 mm
min 569 mm
max 861 mm
Exhaust mode (see symbol in
installation booklet)
Cooking steam is sucked and
channelled outside the house through
a discharge duct (not supplied), fitted to
the hood steam outlet.
Ensure that the discharge duct is
correctly fitted to the air outlet, unit
using an appropriate connection
system.
9
min 471 mm
max 861 mm
min 569 mm
max 861 mm
min 471 mm
max 861 mm
min 569 mm
max 861 mm
Recirculation mode (see symbol
in installation booklet)
The air is filtered through one or more
the charcoal filters, and then resent into
room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied
without charcoal filters and installed on
recirculation mode, these must be fitted
before the hood can be used. Filters are
available in shops.
The hood should be installed away from
particularly dirty areas, windows, doors
and heat sources.
The accessories for wall fixing are not
included because wall made of different
materials require different types of
fixing accessories. Use fixing systems
suitable for the walls of your home and
the weight of the appliance. For more
details, contact a specialized dealer.
Keep this booklet for future
consultation.

11 ENGLISH
Product description
Hood body
LED Lighting
Grease filter
Control panel
Control Panel
A Turns the motor ON at speed one and turn the Motor OFF at each Speed
B Turns the motor on at speed two.
C Turns the Motor on at speed three.
D Turns the lighting system on and o at maximum intensity.
* If the sliding suction pannel is closed, the Hoods is Light OFF and Motor
OFF.

12 ENGLISH
Care and cleaning
Switch off or unplug the appliance
from the mains supply before carrying out
any maintenance work.
IMPORTANT Clean the hood using a damp
cloth and a neutral liquid detergent.
Long Life Charcoal Filter (Green)
The anti-odour Filter can be washed and
regenerated every 3-4 months (or more
frequently if the hood is subject to intensive
use), up to a Max. of 8 regeneration cycles (in
case of particularly intensive use it is recom-
mended that you do not exceed 5 cycles).
Regeneration procedure:
• Wash in the dishwasher at a MAX
temperature of 70° or hand wash in hot
water without using abrasive sponges
(do not use detergents!).
• Dry in the oven at a MAX temperature
of 70° for 2 hours (it is recommended to
read carefully the user manual and the
assembly instruction of the oven of your
own).
• Switch ON the hood at minimum speed when you start cooking and keep it running for
few minutes after cooking is finished.
• Increase the speed only in case of large amount of smoke and vapour and use boost
speed(s) only in extreme situations.
• Replace the charcoal filter(s) when necessary to maintain a good odour reduction ef-
ficiency.
• Clean the grease filter(s) when necessary to maintain a good grease filter efficiency.
• Use the maximum diameter of the ducting system indicated in this manual to optimize
efficiency and minimize noise.
General hints

13 ENGLISH
Lamp Power (W) Socket Voltage (V) Dimension
(mm) ILCOS Code
4 E14 220-240 107 x 37 DRBB/F-4-220-240-E14-35/100
Replacing the lamps
Unscrew the bulbs, by using safety gloves,
and replace them with new ones having the
same characteristics 4W (Connection type:
E14).
[
Grease Filters
Clean or replace the filters continuously ac-
cording to below time intervals, to maintain
good performance of the hood and to
prevent a potential fire hazard, caused by
excessive grease build-up.
The grease filters must be cleaned every 2
months of operation, or more frequently for
particularly heavy usage, and can be washed
in a dishwasher.

14 ENGLISH
What to do if...
If there is a fault, first try to find a solution
to the problem yourself. If you cannot find a
solution to the problem yourself, contact an
authorized service center.
If you operated the appliance wrongly,
or the installation was not carried out
according to the Assembly instructions, the
visit from the Authorized Service Centre
technician may not take place free of
charge, even during the warranty period.
Before contacting the Authorized Service Centre:
Switch the appliance on again to see if the problem has disappeared. If not, switch it off
again and repeat the operation after an hour.
If your appliance still does not work properly after carrying out the checks listed in the trou-
bleshooting guide and switching the appliance on again, contact the Authorized Service
Centre, clearly explaining the problem and specifying:
• the type of fault;
• the model;
• the type and serial number of the appliance (given on the rating plate).
PROBLEM POSSIBLE CAUSE SOLUTION
Appliance not stable The appliance is not correctly installed Follow the Installation instruction en-
closed to the appliance.
Appliance is not in horizontal
position The appliance is not correctly installed Follow the Installation instruction en- closed to the appliance.
Performance in terms of oil cap-
ture are not satisfying Oil and grease on metal lters or charcoal lters. Follow the cleaning frequency of lters as described in the user manual
Appliance does not work The appliance is not correctly con-
nected
Verify that the main cable is connected
to the motor group or the plug is con-
nected to the socket
The light does not work The LED is broken You can replace the lamp without con-
tact the Authorized Service Centre.
Noise of hood is higher than
customer expectation.
Air outlet diameter in the wall is too
small, causing a pressure drop and
an increase in motor speed.
Follow the Installation instruction en-
closed to the appliance.
Product is installed in recirculation
mode.
Product in recirculation mode(and using
a charcoal lter) will generate an higher
noise than a product in extration mode.
More than one bend in the ventila-
tion duct.
If the exhaust system in the building
has multiple bend in or a long distance,
this can increase the noise of the
product.

15 ENGLISH
This appliance has been designed,
manufactured and marketed in compliance
with the E.E.C. Directives.
The technical information is situated in
the rating plate on the internal side of the
appliance.
Technical Data
Unit Value
Product Type Telescopic Hood
Dimensions
Width mm 598,5
Depth mm Min.387 - Max.537
Height min/max mm 215
Airow max* - Exhaust m3/h 340
Noise max* - Exhaust dBA 67
Airow max* - Recirculating m3/h 140
Noise max* - Recirculating dBA 72
Total Power W108
Lamps info
Type LED
Number & Power 2 x 4W
Socket E14
Installation minimum height - gas hob mm 650
Installation minimum height - elec hob mm 500
Installation minimum height - elec hob (Only applicable for Korea) mm 650
Net Weight Kg 7,6
* Maximum speed (boost excluded).

16 ENGLISH
Environment concerns
IKEA GUARANTEE
Maintenance
• The symbol on the product or on
its packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the ap-
plicable collection point for the recycling
of electrical and electronic equipment.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environ-
ment and human health, which could
otherwise be caused by inappropriate
waste handling of this product.
How long is the IKEA guarantee valid?
This guarantee is valid for five (5) years
from the original date of purchase of your
appliance at IKEA. The original sales receipt
is required as proof of purchase. If service
work is carried out under guarantee, this
will not extend the guarantee period for the
appliance.
Who will execute the service?
IKEA service provider will provide the ser-
vice through its own service operations or
authorized service partner network.
What does this guarantee cover?
The guarantee covers faults of the appli-
ance, which have been caused by faulty
construction or material faults from the
date of purchase from IKEA. This guarantee
applies to domestic use only. The excep-
tions are specified under the headline
“What is not covered under this guaran-
tee?” Within the guarantee period, the
costs to remedy the fault e.g. repairs, parts,
labour and travel will be covered, provided
that the appliance is accessible for repair
For more detailed information about
recycling of this product, please contact
your local city office, your household
waste disposal service or the shop
where you purchased the product.
Packaging materials
The materials with the symbol are re-
cyclable. Dispose the packaging in suitable
collection containers to recycle it.
without special expenditure. On these
conditions the respective local regulations
are applicable. Replaced parts become the
property of IKEA.
What will IKEA do to correct the prob-
lem?
IKEA appointed Service Provider will exam-
ine the product and decide, at its sole dis-
cretion, if it is covered under this guarantee.
If considered covered, IKEA Service Provider
or its authorized service partner through
its own service operations, will then, at its
sole discretion, either repair the defective
product or replace it with the same or a
comparable product.
What is not covered under this guaran-
tee?
• Normal wear and tear.
• Deliberate or negligent damage, dam-
age caused by failure to observe operat-
ing instructions, incorrect installation
or by connection to the wrong voltage,
damage caused by chemical or electro-
chemical reaction, rust, corrosion or

17 ENGLISH
water damage including but not limited
to damage caused by excessive lime in
the water supply, damage caused by
abnormal environmental conditions.
• Consumable parts including batteries
and lamps.
• Non-functional and decorative parts
which do not affect normal use of the
appliance, including any scratches and
possible color differences.
• Accidental damage caused by foreign
objects or substances and cleaning or
unblocking of filters, drainage systems
or soap drawers.
• Damage to the following parts: ceramic
glass, accessories, crockery and cutlery
baskets, feed and drainage pipes, seals,
lamps and lamp covers, screens, knobs,
casings and parts of casings. Unless
such damages can be proved to have
been caused by production faults.
• Cases where no fault could be found
during a technician’s visit.
• Repairs not carried out by our appointed
service providers and/or an authorized
service contractual partner or where
non- original parts have been used.
• Repairs caused by installation which is
faulty or not according to specification.
• The use of the appliance in a non- do-
mestic environment i.e. professional use.
• Transportation damages. If a customer
transports the product to his home
or another address, IKEA is not liable
for any damage that may occur dur-
ing transport. However, if IKEA delivers
the product to the customer’s delivery
address, then damage to the product
that occurs during this delivery will be
covered by IKEA.
• Cost for carrying out the initial installa-
tion of the IKEA appliance.
• However, if an IKEA appointed Service
Provider or its authorized service partner
repairs or replaces the appliance under
the terms of this guarantee, the appoint-
ed Service Provider or its authorized
service partner will reinstall the repaired
appliance or install the replacement, if
necessary.
• All plumping and electrical installation,
are not the responsibility of IKEA, and
customer must complete these work
before the execution work.
How country law applies
The IKEA guarantee gives you specific legal
rights, which cover or exceed all the local
legal demands. However these conditions
do not limit in any way consumer rights
described in the local legislation.
Valid for INDIA only: The courts at New
Delhi have exclusive jurisdiction for setting
the claims or disputes or matters arising
out of present Warranty.
Area of validity
This warranty is valid only in the country
where the product has been purchased; the
services will be provided in the framework
of the guarantee conditions. An obligation
to carry out services in the framework of
the guarantee exists only if the appliance
complies and is installed in accordance
with:
• the technical specifications of the
country in which the guarantee claim is
made;
• the Assembly Instructions and User
Manual Safety Information;
The dedicated AFTER SALES for IKEA ap-
pliances
Please don’t hesitate to contact IKEA ap-
pointed Authorized Service Centre to:
• make a service request under this guar-
antee;
• ask for clarifications on installation of
the IKEA appliance in the dedicated IKEA
kitchen furniture;
• ask for clarification on functions of IKEA
appliances.

18 ENGLISH
To ensure that we provide you with the best
assistance, please read carefully the Assem-
bly Instructions and/or the User Manual
before contacting us.
How to reach us if You need our service
The IKEA after sales customer service
center will assist you on the phone with
basic trouble- shooting for your
appliances at the time of service call
request.
Please refer to www.IKEA.com and
select your local store for local store
phone numbers and opening times.
Before calling us, assure that You have
to hand the IKEA article number (8 digit
code) and the Serial Number (8 digit
code that can be found on the rating
plate) for the appliance of which you
need our assistance.
SAVE THE SALES RECEIPT! It is your
proof of purchase and required for the
guarantee to apply. Note that the
receipt reports also the IKEA article
name and number (8 digit code) for
each of the appliances you have
purchased.
Do you need extra help?
For any additional questions not related
to After Sales of your appliances please
contact your nearest IKEA store call centre.
We recommend you read the appliance
documentation carefully before contacting
us.

19

© Inter IKEA Systems B.V. 2021 23199 AA-2278831-2
991.0644.864_02 - 211214
D00007719_01