Imagine HOMS+OP+ User manual

Delivering the Moment
Installaon and Operaon Manual
HOMS+OP+/ OHDS+OP+
SDI-to-Opcal Converter
and Fiber Opc Mulplexer/
Opcal-to-SDI Converter and Fiber Opc
Demulplexer
Edion A
175-000333-00

Publicaon Informaon
© 2014 Imagine Communicaons Corp. Proprietary and Condenal.
Imagine Communicaons considers this document and its contents to be proprietary and condenal. Except for
making a reasonable number of copies for your own internal use, you may not reproduce this publicaon, or any part
thereof, in any form, by any method, for any purpose, or in any language other than English without the wrien consent
of Imagine Communicaons. All others uses are illegal.
This publicaon is designed to assist in the use of the product as it exists on the date of publicaon of this manual, and
may not reect the product at the current me or an unknown me in the future. This publicaon does not in any way
warrant descripon accuracy or guarantee the use for the product to which it refers. Imagine Communicaons reserves
the right, without noce to make such changes in equipment, design, specicaons, components, or documentaon as
progress may warrant to improve the performance of the product.
Trademarks
6800+™, ADC™, CCS Navigator™, Channel ONE™, ChannelView™, ClipSync™, Delay™, D Series™, D Series DSX™, Deliver
the Moment™, Delivering the Moment™, FAME™, Farad™, G8™, G Scribe™, HView™, IconMaster™, IconLogo™, IconSta-
on™, IconKey™, InfoCaster™, InfoCaster Creator™, InfoCaster Manager™, InfoCaster Player™, InstantOnline™, Invenio®,
Live Update™, mCAPTURE™, Magellan™, Magellan CCS Navigator™, Magellan Q SEE™, MulService SDN™, NetPlus™,
NetVX™, NewsForce™, Nexio® G8™, Nexio AMP® ChannelView™, Nexio® Channel ONE™, Nexio® ClipSync™, Nexio®
Delay™, Nexio® Digital Turnaround Processor™, Nexio® Farad™, Nexio® G Scribe™, Nexio® IconKey™, Nexio® IconLogo™,
Nexio® IconMaster™, Nexio® IconStaon™, Nexio® InfoCaster™, Nexio® InfoCaster Creator™, Nexio® InfoCaster Manag-
er™, Nexio® InfoCaster Player™, Nexio® InfoCaster Trac™, Nexio® InstantOnline™, Nexio® mCAPTURE™, Nexio® News-
Force™, Nexio® NXIQ™, Nexio® Playlist™, Nexio® Remote™, Nexio®RTX Net™, Nexio® TitleMoon™, Nexio® TitleOne™,
Nexio® Velocity ESX™, Nexio® Velocity PRX™, Nexio® Velocity XNG™, Nexio® Volt™, OPTO+™, Panacea™, Planum™,
Playlist™, Predator II GRF™, Predator II GX™, Punctuate™, Remote™, RTX Net™, QuiC™, Q SEE™, SD STAR™, Selenio™,
Selenio 6800+™, SelenioNext™, Selenio X50™, Selenio X85™, Selenio X100™, TitleMoon™, TitleOne™, Velocity ESX™,
Velocity PRX™, Velocity XNG™, Versio™, Videotek® SD STAR™, X50™, and X85™ are trademarks of Imagine Communica-
ons or its subsidiaries.
Altude Express®, Connectus®, Enabling PersonalizedTV®, ICE® Broadcast System, ICE Illustrate®, ICE Q® algorithms, ICE-
PAC®, Imagine ICE®, Inscriber®, Inscriber® Connectus®, Invenio®, NEO®, Nexio®, Nexio AMP®, PersonalizedTV®, Router-
Works®, Videotek®, Videotek® ASI STAR®, Videotek® GEN STAR®, and Videotek® HD STAR® are registered trademarks of
Imagine Communicaons or its subsidiaries.
Microso® and Windows® are registered trademarks of Microso Corporaon. HD BNC is a trademark of Amphenol
Corporaon. Some products are manufactured under license from Dolby Laboratories. Dolby and the double D symbol
are registered trademarks of Dolby Laboratories. DTS Neural audio products are manufactured under license from DTS
Licensing Limited. DTS and the Symbol are registered trademarks & the DTS Logos are trademarks of DTS, Inc. © 2008
2010 DTS, Inc. All other trademarks and trade names are the property of their respecve companies.
Contact Informaon
Imagine Communicaons has oce locaons around the world. For locaons and contact informaon see:
hp://www.imaginecommunicaons.com/contact us/
Support Contact Informaon
For support contact informaon see:
▪Support Contacts: hp://www.imaginecommunicaons.com/services/technical support/
▪eCustomer Portal: hp://support.imaginecommunicaons.com
© 2014 Imagine Communicaons Corp. Proprietary and Condenal

HOMS+OP+
SDI-to-Optical Converter and Fiber Optic
Multiplexer
OHDS+OP+
Optical-to-SDI Converter and Fiber Optic
Demultiplexer
Installation and Operation Manual
Edition A
May 2007

HOMS+OP+and OHDS+OP+Installation and Operation Manual iii
Contents
Preface
Manual Information .................................................................................v
Unpacking/Shipping Information ......................................................... vii
References ............................................................................................ viii
Safety Standards and Compliances ..........................................................x
Chapter 1: Introduction
Product Description ..................................................................................2
General Description ..........................................................................2
HOMS+OP+ Main Features .............................................................2
OHDS+OP+ Main Features ..............................................................3
Module Types ...................................................................................4
Typical Broadcast and Production Applications ..............................5
Module Descriptions ................................................................................6
Front Modules ...................................................................................6
Back Modules ...................................................................................7
Signal Flow ..............................................................................................8
Chapter 2: Installation
Maximum Frame Power Ratings ...........................................................12
Unpacking the Module ...........................................................................13
Preparing the Product for Installation .............................................13
Checking the Packing List ..............................................................13
Setting Jumpers .....................................................................................13
Installing and Removing the Modules ...................................................14
Installation Overview ......................................................................14
Back Module Installation ................................................................15
Front Module Installation ...............................................................16
Removing Modules .........................................................................18

iv HOMS+OP+and OHDS+OP+Installation and Operation Manual
Contents
Inspecting and Cleaning Fiber Optic Connections ................................ 19
Important Points ............................................................................. 19
Inspection and Cleaning Procedure ................................................ 21
Chapter 3: Operation
Cross-Functional Parameter Changes ................................................... 25
Setting Parameters ................................................................................. 26
HOMS+OP+.................................................................................. 26
OHDS+OP+.................................................................................. 29
LEDs and Alarms .................................................................................. 31
LEDs .............................................................................................. 31
Alarms ............................................................................................ 32
Chapter 4: Specifications
Laser Output .......................................................................................... 36
Inputs ..................................................................................................... 37
HOMS+OP+.................................................................................. 37
OHDS+OP+.................................................................................. 37
Outputs .................................................................................................. 38
HOMS+OP+.................................................................................. 38
OHDS+OP+.................................................................................. 39
Inputs to Outputs Performance
(HOMS+OP+to OHDS+OP+) ............................................................ 40
Power Consumption .............................................................................. 41
Appendix A: Laser Safety Guidelines
Laser Safety ........................................................................................... 44
Precautions for Enclosed Systems ................................................. 44
Precautions for Unenclosed Systems ............................................. 45
Labels .................................................................................................... 46
Index
Keywords .............................................................................................. 47

HOMS+OP+and OHDS+OP+Installation and Operation Manual v
Preface
Manual Information
Purpose
This manual details the features, installation procedures, operational
procedures, and specifications of the HOMS+OP+SDI-to-optical
converter and fiber optic multiplexer, and of the OHDS+OP+
optical-to-SDI converter and fiber optic demultiplexer.
Audience
This manual is written for engineers, technicians, and operators
responsible for the installation, setup, and/or operation of the
HOMS+OP+SDI-to-optical converter and fiber optic multiplexer and
of the OHDS+OP+optical-to-SDI converter and fiber optic
demultiplexer.
Revision History
Table P-1. Manual Revision History
Edition Date Revision History
AMay 2007 Initial release

vi HOMS+OP+and OHDS+OP+Installation and Operation Manual
Preface
Writing Conventions
To enhance your understanding, the authors of this manual have
adhered to the following text conventions:
Obtaining Documents
Technical documents can be viewed or downloaded from our Web site
at www.broadcast.harris.com/leitch (go to Support>Documentation).
Alternatively, contact your Customer Service representative to request a
document.
Table P-2. Manual Style and Writing Conventions
Term or
Convention Description
Bold Indicates dialog boxes, property sheets, fields, buttons,
check boxes, list boxes, combo boxes, menus, submenus,
windows, lists, and selection names.
Italics Indicates email addresses, the names of books or
publications, and the first instances of new terms and
specialized words that need emphasis.
CAPS Indicates a specific key on the keyboard, such as ENTER,
TAB, CTRL, ALT, or DELETE.
Code Indicates variables or command-line entries, such as a
DOS entry or something you type into a field.
> Indicates the direction of navigation through a hierarchy
of menus and windows.
hyperlink Indicates a jump to another location within the electronic
document or elsewhere
Internet address Indicates a jump to a Web site or URL
NOTE Indicates important information that helps to avoid and
troubleshoot problems.

HOMS+OP+and OHDS+OP+Installation and Operation Manual vii
Preface
Unpacking/Shipping Information
This product was carefully inspected, tested, and calibrated before
shipment to ensure years of stable and trouble-free service.
1. Check equipment for any visible damage that may have occurred
during transit.
2. Confirm that you have received all items listed on the packing list.
3. Contact your dealer if any item on the packing list is missing.
4. Contact the carrier if any item is damaged.
5. Remove all packaging material from the product and its associated
components before you install the unit.
Keep at least one set of original packaging, in the event that you need to
return a product for servicing.
In the unlikely event that your product fails to operate properly, please
contact Customer Service to obtain a Return Authorization (RA)
number, then send the unit back for servicing.
Keep at least one set of original packaging in the event that a product
needs to be returned for service. If the original package is not available,
you can supply your own packaging as long as it meets the following
criteria:
• The packaging must be able to withstand the product’s weight.
• The product must be held rigid within the packaging.
• There must be at least 2 in. (5 cm) of space between the product and
the container.
• The corners of the product must be protected.
Ship products back to us for servicing prepaid and, if possible, in the
original packaging material. If the product is still within the warranty
period, we will return the product prepaid after servicing.

viii HOMS+OP+and OHDS+OP+Installation and Operation Manual
Preface
References
ANSI/SMPTE 259M-1997
10-Bit 4:2:2 Component and 4fsc NTSC Composite Digital Signals -
Serial Digital Interface (143/177/270/360 Mb/s SDI)
SMPTE 344M-2000
540 Mb/s Serial Digital Interface
SMPTE 292M-1999
Bit-Serial Digital Interface for High-Definition Television Systems (1.5
Gb/s SDI)
SMPTE 297M-2000
Serial Digital Fiber Transmission System for SMPTE 259M- and
SMPTE 292M- Signals
DVB A010 Rev.1
Interfaces for CATV / SMATV Headends and Similar Professional
Equipment (Annex B: ASI)
ITU-T G.694.2
Spectral Grids for WDM Applications: CWDM (Coarse Wavelength
Division Multiplexing) Wavelength Grid
ITU-T G.695
Optical Interfaces for CWDM Applications
ITU-T G.652
Characteristics of a Single-Mode Optical Fiber Cable
IEC 61754-4-1
Fibre Optic Connector Interfaces – Part 4-1: Type SC Connector
Family — Simplified Receptacle SC-PC Connector Interfaces
IEC 60874-14-2
Detail Specification for Fiber Optic Connector Type SC-PC Tuned
Terminated to Single-Mode Fiber Type B1
IEC 60874-14-5
Detail Specification for Fiber Optic Connector Type SC-PC Untuned
Terminated to Single-Mode Fiber Type B1

HOMS+OP+and OHDS+OP+Installation and Operation Manual ix
Preface
FCC Code of Federal Regulations (CFR) 47, part 15
EN55103-1
EMC Emission Requirements Applies to Professional Audio,
Video, Audio-Visual, and Entertainment Lighting Control
Apparatus
EN55103-2
EMC Immunity Requirements Applies to Professional Audio,
Video, Audio-Visual, and Entertainment Lighting Control
Apparatus

xHOMS+OP+and OHDS+OP+Installation and Operation Manual
Preface
Safety Standards and Compliances
See “Laser Safety” on page 44 to find the safety standards and
compliances for this +OP+series product. A 6800+ series safety
manual is shipped with every FR6802+Frame Installation and
Operation Manual and can be downloaded from our Web site at
www.broadcast.harris.com/leitch. Alternatively, contact your Customer
Service representative for a copy of this safety manual.
Restriction on Hazardous Substances (RoHS) Directive
Directive 2002/95/EC—commonly known as the European Union (EU)
Restriction on Hazardous Substances (RoHS)—sets limits on the use of
certain substances found in electrical and electronic equipment. The
intent of this legislation is to reduce the amount of hazardous chemicals
that may leach out of landfill sites or otherwise contaminate the
environment during end-of-life recycling. The Directive took effect on
July 1, 2006, and it refers to the following hazardous substances:
• Lead (Pb)
• Mercury (Hg)
• Cadmium (Cd)
• Hexavalent Chromium (Cr-V1)
• Polybrominated Biphenyls (PBB)
• Polybrominated Diphenyl Ethers (PBDE)
According to this EU Directive, all products sold in the European Union
are fully RoHS-compliant and “lead-free.” (See our Web site,
www.broadcast.harris.com/leitch > company > environmental compli-
ance, for more information on dates and deadlines for compliance.)
Spare parts supplied for the repair and upgrade of equipment sold
before July 1, 2006 are exempt from the legislation. Equipment that
complies with the EU directive is marked with a RoHS-compliant
emblem, as shown in Figure P-1.
Figure P-1. RoHS Compliance Emblem

HOMS+OP+and OHDS+OP+Installation and Operation Manual xi
Preface
Waste from Electrical and Electronic Equipment
(WEEE) Directive
The European Union (EU) Directive 2002/96/EC on Waste from
Electrical and Electronic Equipment (WEEE) deals with the collection,
treatment, recovery, and recycling of electrical and electronic waste
products. The objective of the WEEE Directive is to assign the
responsibility for the disposal of associated hazardous waste to either
the producers or users of these products. Effective August 13, 2005,
producers or users are required to recycle electrical and electronic
equipment at end of its useful life, and may not dispose of the
equipment in landfills or by using other unapproved methods. (Some
EU member states may have different deadlines.)
In accordance with this EU Directive, companies selling electric or
electronic devices in the EU will affix labels indicating that such prod-
ucts must be properly recycled. (See our Web site, www.broadcast.har-
ris.com/leitch > company > environmental compliance, for more
information on dates and deadlines for compliance.) Contact your local
sales representative for information on returning these products for
recycling. Equipment that complies with the EU directive is marked
with a WEEE-compliant emblem, as shown in Figure P-2.
Figure P-2. WEEE Compliance Emblem

xii HOMS+OP+and OHDS+OP+Installation and Operation Manual
Preface
Safety Terms and Symbols
This product manual uses the following safety terms and symbols to
identify certain conditions or practices. See “Laser Safety” on page 44
and the 6800+Safety Instructions and Standards Manual for more
information.
Table P-3. Safety Terms and Symbols
WARNING: Identifies conditions or practices that can result in
personal injury or loss of life—high voltage is present.
Uninsulated dangerous voltage within the product’s enclosure
may be sufficient to constitute a risk of electric shock to persons.
CAUTION: Identifies conditions or practices that can result in
damage to the equipment or other property. Important operating
and maintenance (servicing) instructions are included in the
literature accompanying the product.

HOMS+OP+and OHDS+OP+Installation and Operation Manual 1
Chapter 1
Introduction
Overview
The HOMS+OP+module is a Coarse Wavelength Division
Multiplexing (CWDM) SDI-to-optical converter and fiber optic
multiplexer. The OHDS+OP+is a CWDM optical-to-SDI converter
and fiber optic demultiplexer. These modules are designed for high-end
multi-channel transport of video in limited “fiber-line” applications.
The following topics are described in this chapter:
•“Product Description” on page 2
•“Module Descriptions” on page 6
•“Signal Flow” on page 8

2HOMS+OP+and OHDS+OP+Installation and Operation Manual
Chapter 1: Introduction
Product Description
General Description
The HOMS+OP+and OHDS+OP+modules are designed for use in
any SD and/or HD environment in which SDI and DVB-ASI signals
must cross distances that exceed the normal capabilities of professional
video cable. The modules incorporate a passive filter design and feature
high optical isolation to ensure low crosstalk. HOMS+OP+and
OHDS+OP+modules are fully hot-swappable from the front of the
FR6802+XF frame.
HOMS+OP+ Main Features
HOMS+OP+features include the following:
• Automatic cable equalization on inputs
• Remote control and monitoring via CCS-compliant software and
control panels of the following:
• Automatic and manual reclocking rate settings and reporting
(143, 177, 270, 360, 540 MB/s; and 1.485 Gb/s)
• Status reports and alarms for SDI presence
• Status reports and alarms for input signal lock
• Status reports and alarms for laser function
• Automatic reclocking bypass when data cannot be locked to one of
six set reclocking rates
• Identical input/output polarity for ASI compliance
• Automatic laser protection against irregular power output or
excessive laser bias current
• Standard SMPTE SC/PC optical connector, supporting ST/PC and
FC/PC available options1
• ITU-T G.694.2 standard CWDM wavelength compliance
• No requirement for low-water-peak fiber
• 4/8/12/16-channel expandability
• Capability for studio-transmitter link (STL) and transmitter-studio
link (TSL) applications
1 Contact your Harris sales representative to order ST/PC and FC/PC options.

HOMS+OP+and OHDS+OP+Installation and Operation Manual 3
Chapter 1: Introduction
OHDS+OP+ Main Features
OHDS+OP+features include the following:
• Remote control and monitoring via CCS-compliant software and
control panels of the following:
• Automatic and manual reclocking rate settings and reporting
(143, 177, 270, 360, 540 MB/s; and 1.485 Gb/s)
• Status reports for optical signal presence
• Status reports for input signal lock
• Automatic reclocking bypass when data cannot be locked to one of
six set reclocking rates
• Identical input/output polarity for ASI compliance
• Dual identical SDI outputs for each channel (4-channel version)
• Standard SMPTE SC/PC optical connector, supporting ST/PC and
FC/PC available options1
• ITU-T G.694.2 standard CWDM wavelength compliance
• No requirement for low-water-peak fiber
• Multiple wavelength capability between 1271 nm and 1611 nm
• 4/8/12/16-channel expandability
• Capability for studio-transmitter link (STL) and transmitter-studio
link (TSL) applications
1 Contact your Harris sales representative to order ST/PC and FC/PC options.

4HOMS+OP+and OHDS+OP+Installation and Operation Manual
Chapter 1: Introduction
Module Types
Table 1-1 lists the wavelengths supported by the four- or eight-channel
versions of each module.
Table 1-1. OHDS+OP+CxxD (Coarse-Wavelength) Modules
Four-Channel Module Types
Multiplexer Modules Wavelengths
HOMS+OP+CL4D
(lower frequency four-channel multiplexer)
• 1290 nm
• 1310 nm
• 1330 nm
• 1350 nm
HOMS+OP+CU4D
(upper frequency four-channel multiplexer)
• 1550 nm
• 1570 nm
• 1590 nm
• 1610 nm
Demultiplexer Modules Wavelengths
OHDS+OP+CL4D
(lower frequency four-channel demultiplexer)
• 1290 nm
• 1310 nm
• 1330 nm
• 1350 nm
OHDS+OP+CU4D
(upper frequency four-channel demultiplexer)
• 1550 nm
• 1570 nm
• 1590 nm
• 1610 nm
Eight-Channel Module Types
Multiplexer Modules Wavelengths
HOMS+OP+CL8D
(lower frequency eight-channel multiplexer)
• 1270 nm
• 1290 nm
• 1310 nm
• 1330nm
• 1350 nm
• 1370 nm
• 1430 nm
• 1450nm
HOMS+OP+CU8D
(upper frequency eight-channel multiplexer)
• 1470 nm
• 1490 nm
• 1510 nm
• 1530 nm
• 1550 nm
• 1570 nm
• 1590 nm
• 1610nm
Demultiplexer Modules Wavelengths
OHDS+OP+CL8D
(lower frequency eight-channel demultiplexer)
• 1270 nm
• 1290 nm
• 1310 nm
• 1330 nm
• 1350 nm
• 1370 nm
• 1430nm
• 1450 nm
OHDS+OP+CU8D
(upper frequency eight-channel demultiplexer)
• 1470 nm
• 1490 nm
• 1510 nm
• 1530nm
• 1550 nm
• 1570 nm
• 1590 nm
• 1610 nm

HOMS+OP+and OHDS+OP+Installation and Operation Manual 5
Chapter 1: Introduction
Typical Broadcast and Production Applications
HOMS+OP+and OHDS+OP+products can be used in broadcast,
cable, production, educational, and auditorium applications where a
low-cost method of distributing serial digital video signals is required.
Typical applications include sending signals from a studio, remote
truck, or other production facility to the transmission site/facility. Other
applications include sending signals within one broadcast organization
with buildings remotely located across a large campus area or across
town.

6HOMS+OP+and OHDS+OP+Installation and Operation Manual
Chapter 1: Introduction
Module Descriptions
Front Modules
Figure 1-1. HOMS+OP+and OHDS+OP+Front Module
(OHDS+OP+shown)