Infineon AIROC CYBLE-343072-EVAL-M2B User manual

Quick start guide
AIROC™ Bluetooth® LE module evaluation kit
www.infineon.com/cyble-343072-eval-m2b/
Kit contents
1. CYW9BTM2BASE1 baseboard
2. CYBLE-343072-EVAL Bluetooth® radio card based on AIROC™ CYW20835 silicon
(connected to the baseboard using the M.2 connector)
3. USB standard-A to Micro-B cable
4. Quick start guide (this document)
CYBLE-343072-EVAL-M2B

Quick start guide
Before you start
1. Register on the Developer community and
then download and install ModusToolbox™
soware v 2.4 (or later) with the Bluetooth®
SDK at
https://www.infineon.com/modustoolbox.
2. Your kit has the ‘Hello Sensor’ application
pre-programmed. Do the following to install
the ‘HelloClient’ peer application.
a. In Eclipse IDE for ModusToolbox™
soware, select File > New application.
This launches the project creator.
b. In the project creator, click
AIROC™ Bluetooth® BSPs.
c. Select the ‘CYBLE-343072-EVAL-M2B’
kit and click Next.
d. Under template applications, select
Bluetooth® and select LE Hello Sensor.
(refer to the screenshot on the right).
e. Click Create and wait ~10 seconds for
Project Creator to close.
3. Connect a USB cable between the PC and
CYBLE-343072-EVAL-M2B (J6) to
power the kit.
Run the ‘HelloClient’ application
1. Locate the ‘HelloClient’ peer sample
application on your PC that complements
the ‘HelloSensor’ application at
…\mtw\mtb_shared\wiced_btsdk\tools\
btsdk-peer-apps-ble\release-v<Version#>\
hello_sensor\Windows\HelloClient\
Release\x64.
2. Run the HelloClient executable on your PC
and select the ‘HelloSensor’ device, which
appears as a device with the name ‘Hello’.
3. When prompted, allow pairing from
the client to the HelloSensor device.
4. In the HelloClient window, select Allow
Notifications next to the Hello Input
characteristic.
5. Press button SW3 on the evaluation kit.
Observe that the Value field shows the
Hello 1 message.
6. Press SW3 again, and then click Read.
Observe that the Value field for the Hello
Configuration characteristic is
incremented.
ModusToolbox™ soware
HelloClient application

Quick start guide
1. VDDIO current measurement
jumper (J17)
2. Peripheral enable jumper (J19)
3. VDDIO select jumper (J7)
4. Baseboard power status LED (D3)
5. VBAT select jumper (J8)
6. USB connector for programming/
USB-UART (J6)
7. VPA select jumper (J16)
8. KitProg3 based on PSoC™ 5LP
MCU (U12)
9. KitProg3 mode select (SW5)
10. KitProg3 status LED (D5)
11. Debug interface select jumper (SW8)
12. Debug header (J13)
13. Recovery button (SW1)
14. Header compatible with Arduino (J1)
15. Reset button (SW2)
16. Header compatible with Arduino (J2)
17. User button (SW3)
18. User LEDs (D1, D2)
19. User LED/DMIC switch (SW4)
20. Digital mic sound port (J16)
21. AIROC™ CYBLE-343072-02
22. Analog mic footprint (MIC1)
23. Thermistor (TH2)
24. Thermistor enable jumper (J18)
25. Header compatible with Arduino (J4)
26. Bluetooth® I/O header (J12)
27. Header compatible with Arduino (J3)
28. Bluetooth® I/O header (J11)
29. Ambient light sensor (U10)
1
2
3
4
5
6
7
8
9
16 17
10 18
11 12
19
13 14
20
15
21
22
23
24
25
26
272829
AIROC™ Bluetooth® LE module evaluation kit board details
CYBLE-343072-EVAL-M2B

Published by
Infineon Technologies AG
81726 Munich, Germany
© 2022 Infineon Technologies AG.
All Rights Reserved.
Document Number: 002-34052 Rev. *A
Date: 08 / 2022
Please note!
This Document is for information purposes only and any
information given herein shall in no event be regarded as a
warranty, guarantee or description of any functionality,
conditions and/or quality of our products or any suitability
for a particular purpose. With regard to the technical
specifications of our products, we kindly ask you to refer
to the relevant product data sheets provided by us.
Our customers and their technical departments are
required to evaluate the suitability of our products
for the intended application.
We reserve the right to change this document and/or
the information given herein at any time.
Additional information
For further information on technologies, our products, the
application of our products, delivery terms and conditions
and/or prices, please contact your nearest Infineon Technologies
office (www.infineon.com).
Warnings
Due to technical requirements, our products may contain
dangerous substances. For information on the types in question,
please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by us in a written
document signed by authorized representatives of Infineon
Technologies, our products may not be used in any life-
endangering applications, including but not limited to medical,
nuclear,military,life-critical or any other applications where a
failure of the product or any consequences of the use thereof
can result in personal injury.
www.infineon.com
Quick start guide
AIROC™ Bluetooth® LE module evaluation kit pinout details
GND
P27
P27
NC
NC
HOST_WAKE
NC
NC
NC
GND
P34
P38
NC
GND
P07
P16
P06
P14
NC
P09
P0
NC
NC
NC
NC
NC
NC
NC
NC
VIO_BASE
NC
VIO_BASE
RST
3V3
5V
GND
GND
NC
P08
NC
P10
P11
P12
P13
P05
P04
P03
P02
P28
P00
P32
P29
VBAT
GND
UART_RXD
UART_TXD
UART_CTS_N
UART_RTS_N
CYBLE-343072-EVAL-M2B