Infineon CY8CKIT-028-SENSE User manual

Quick start guide
CY8CKIT-028-SENSE IoT sense expansion kit
1 Arduino UNO R3 compatible I/O headers (J2, J3, J4)
2 XENSIVTM digital barometric pressure sensor with
built-in temperature sensor (U3)
3 OLED display module (ACC6, J6)
4 Arduino UNO R3 compatible power header (J1)
Top board details
1
1
2
3
4
www.infineon.com/CY8CKIT-028-SENSE
Kit contents
› CY8CKIT-028-SENSE IoT sense expansion kit
›Quick start guide (this document)
Features
›XENSIVTM digital barometric pressure sensor with built-in
temperature sensor
›Two high-performance XENSIVTM MEMS digital microphones
›Six-axis inertial measurement unit
›Wake-on-sound piezoelectric MEMS microphone
›I2C-based OLED display module
›ArduinoTM UNO compatible headers
›Low-power stereo audio codec with audio jack

5 XENSIVTM MEMS digital microphones (U1, U2)
6 Six-axis inertial measurement unit (U6)
7 Crystal oscillator (Y1)
8 I2C level translator (U7)
9 Audio jack type selection switch (SW1)
10 Audio codec (U4)
11 3.5-mm stereo audio jack socket (J5)
12 Piezoelectric MEMS analog microphone (U5)
13 Preamplifier for analog microphone (U8)
5
8
610
7
5
9
11
12
13
Bottom board details
To learn more about how to use this shield for Machine Learning applications,
please visit: www.infineon.com/modustoolboxml.
Use this expansion kit along with an Infineon MCU kit that has a compatible
interface such as CY8CKIT-062S2-43012.
For the complete list of compatible kits, see www. infineon.com/CY8CKIT-028-SENSE.
Quick start guide
Published by Infineon Technologies AG 81726 Munich, Germany
© 2023 Infineon Technologies AG. All Rights Reserved.
Document Number: 002-32583 Rev. *D
Date: 02 / 2023