Infomir MAG410 User manual

Instruction Manual
SET-TOP BOX
MAG410

Set-Top Box MAG410 Instruction Manual
Regulatory information
EU
This equipment has been tested and found to
comply with the essential requirements of the
following Directives: 2014/30/EU, 2014/35/EU,
2009/125/EC, 2011/65/EU.
This product is in accordance with Directive WEEE
(2002/96/EC)
FCC
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
receiver.
•Connect the equipment to an outlet on a circuit
dierent from that to which the receiver is connected.
•Consult the dealer or an experienced
radio/TV technician for help.

Set-Top Box MAG410 Instruction Manual Warranty
Warranty term:
Europe, MEASA and Oceania:
2 years from date of sale (but not more than 2,5 years
from manufacture date).
USA, Americas, Russia, Ukraine and other regions:
1 year from date of sale (but not more than 1,5 years
from manufacture date).
See the date of manufacture at «Product Information»
section. By virtue of the present Coupon, the absence
of defects in manufacturing of the product and its
compounds is warranted for a year-term counted since
date of sale. If during the mentioned warranty term
the defects of materials or operation of product will be
found, the product would be repaired or its defective
parts would be replaced free of charge in the service
warranty processing center with compliance with
warranty conditions.
Warranty Service Coupon
(to be lled in by a shop-assistant)
Date of Sale:
Company-Seller:
Address of Company-Seller:
Place of Stamp
I have no claims as to appearance and
package contents. I accept the conditions of
warranty service.
Signature of Customer:
Manufacturer:
«Telecommunication Technologies» Ltd,
1 Mytna Square, Odessa, 65026, Ukraine

Warranty processing centers
Warranty Processing Centers List:
Europe:
Ludwig-Erhard-Str. 1A (Eingang B)
65760, Eschborn, Germany
Tel: [phone]
e-mail: [email protected]om
USA:
174 Bay 49th Street
Brooklyn, NY 11214 USA
Tel: [phone]
e-mail: [email protected]
Russia:
«CMS Pro» Ltd.
liter A, 177, Moskovskoe shosse, Shushary settl.
196626, Russian Federation, SPb
Tel: [phone]
e-mail: [email protected]
MEASA and Oceania:
Warehouse B1-40
Sheikh Rashid Bin Saeed Al Maktoum Street
Ajman Free Zone
45573, Ajman, UAE
Tel: [phone]
e-mail: [email protected]om
Ukraine:
4-D, Marshal Zhukov Avenue
65121, Ukraine, Odessa
Tel: [phone]
e-mail: [email protected]om
Additional Information:
Additional and extended information you can see by reference: www.infomir.com

Warranty conditions
1. The present warranty is only valid if the defective
product is provided with property lled in Warranty
Service Coupon. If date of sale is not pointed, the
warranty term is counted since date of the product
manufacturing which is dened under serial number.
Warranty processing center reserves the right to
refuse free warranty service and parts replacement
in case the mentioned above documents are
not presented or the lled in it information is not
complete or unreadable.
2. The present warranty does not enable the right for
compensation and cover of loss received as a result
of rearrangement of the product.
3. The present guarantee is invalid if model or serial
number of the product is altered, erased, removed
or unreadable, or warranty seal is broken.
4. The present warranty does not cover the following:
4.1. Any adaptations and alterations with the aim of
perfection and widening of the common scope of
the product application specied in the Manual.
4.2. Devices and accessories not specied in the coupon.
4.3. Damage caused in result of:
a) Improper maintenance including but not limited by following:
(1) use of the product not according to its intended purpose
or Manual;
(2) mounting and maintenance of the product in conditions not
corresponding to safety standards and regulations valid in
the country of use;
(3) incorrect software installation provided by service operator.
b) Repair performed by not authorized service centers or dealers;
c) Accidents, lightning stroke, ood, re, incorrect ventilation;
d) Transporting excluding cases when it is carried out by ASC;
e) Faults of system in which the present product had been using.
5. These warranty conditions do not intend to restrict
or limit in any way statutory rights of customers
which may not be altered in some jurisdictions
and other customers’rights which may arise out
of any agreements with third parties, provided
that nothing contained in such agreements states
or implies that the manufacturer or manufacturer
aliates assume any obligations or liabilities other
than those expressly stipulated in this Warranty
Service Coupon.
While maintaining warranty liabilities on product
repair or replacement, Manufacturer takes no
responsibilities for personal data safety, including
logins, passwords, paid or free subscriptions, settings,
portals, media les, content and software installed or
set up by Customer or other third parties.

Copyrights and Trademarks
Notice of Copyright
Telecommunication Technologies LTD. All rights
reserved. The Information contained herein is the property
of Telecommunication Technologies LTD (the Company).
Not any part hereof can be copied, reprinted, transferred,
retyped, saved in search engine, modied or translated
into any other language, including computer one, nor
sublicensed in any way, whether electronic, mechanical,
magnetic, optical, chemical, manual or other one,
without prior written consent by the Company Manager
responsible for the Product. Any Illegal use of the materials
contained herein, by any person, will lead the person to the
responsibility for the Company’s damages.
Software Use Agreement
IMPORTANT - read carefully: when using the Software
with your device, you agree thereby with every clauses
of the Software Use Agreement. If you do not agree
with the terms and conditions of the Software Use
Agreement, you should immediately stop using the
device and return it to your services provider completely.
License provision. Limitations
According to this Agreement, Telecommunication
Technologies LTD and your services provider are jointly
to provide you with non-exclusive and
non-transferrable license, without the right to
sublicense, for use of all software and documents with
the product only. You recognize and acknowledge that
Telecommunication Technologies LTD and your services’
provider may regularly renew, change or extend the
product software abilities. You conrm that:
a) You will not take attempts to change, extend, or
decompile, disassembly, or redesign, nor otherwise get
access to the software source code.
b) You will not take attempts to delete or upload the
product software. Any sale or transfer of the product will
be ruled hereby.
Ownership
The Manufacturer and the Manufacturer’s own licensors
keep all the rights constituting ownership, Including patent,
copyright trademark, and other Intel factual property for
the Software; and any Improvement and modication of
the Software. You recognize and acknowledge that the
license according hereof does not grant you ownership for
the Software but only restricted right of use It according to
provisions of this Agreement.
Warranty for the Software
To the maximum extent according to applicable law, the
Company does not make any submission and declines
any and all warranties, whether express or implied,
as to the Software, including, with no limitations, any

implied demand warranties, correspondence to target
destination, abuse of rights of third parties, neither those
being result of interrelations or result of commerce. The
Company does not guarantee the Software will be free
of defects or errors; that any defects or errors will be
corrected, or any function abilities of the Software will
meet all your requirements.
Warranty
Warranty for your product is supplied via your
services’ provider. In the event your product requires
maintenance service, you should contact the services’
supplier directly.
Trademarks
, Infomir are the trademarks of Infomir ltd.
The terms HDMI and HDMI High-Denition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
DCP is the trademark of Digital Content Protection LLC.
Redesigning and disassembling is illegal.
Company name: Telecommunication Technologies Ltd.
1 Mytna Sq., Odessa 65026, Ukraine.
Terms of usingCopyrights and Trademarks
Safe and Ecient Using
Device does not contain harmful or hazardous substances.
Accessories
Use the accessories supplied with your arrangement or
recommended by the manufacturer only. Using of the
accessories which are not supplied or not sanctioned by the
manufacturer may be dangerous for the User or do harm to
the arrangement operation. Using of the not appropriate
accessories eliminates guarantees of the product therewith.
Water and Moisture
To avoid damage that can cause ignition of the present
product or lesion to the User with electrical current, the
product and its accessories should not be undergone with
any liquids, rain or high moisture.
Do not use the present product in the places where it may
be exposed to the contact with a liquid or vapor.

Product Care
Maintenance of Product
The product should not be disassembled. The tries of
the disassembling of the product may be dangerous
for your life and for serviceability of the product.
The self-supporting disassembling invalidates you
the product guarantee.
The maintenance should be aected by qualied
specialists in the warranty processing centers only.
The product possesses protective sealing.
Breaking or changing of the mentioned sealing
invalidates guarantee of the product.
Cleaning
The product and accessories should be rubbed with
dry cloth or tissue only.
To ensure safety, before shell cleaning switch the
power supply o the alternative current socket.
The shell may be cleaned from persistent spots with
a slightly wet cloth or cleaning tissue.
Do not use cleaner or polish, benzyl, solvents, abra-
sive items, liquid or aerosol detergent means for the
product and accessories cleaning.

Specications
Physical Parameters
Model MAG410
Weight: 222 gr.
Dimensions: 110(L)*110(W)*27(H) mm
Operation temperature:
0 – 40
Humidity:
5% ~ 95%RH
Ethernet Interface
Ethernet Connector: RJ-45 unshielded
Cable: UTP and STP 5 categories
Speed: Auto-choice, 10/100 Mbit/s
USB Interface
Type: USB 2.0*3pcs.
Built-in Wi-Fi module
AP6212, 2.4 GHz
Supported Audio-Video Formats
Video odecs: H.265 HEVC [email protected] UP TO 4K*2K
@60fps, H.264 AVC [email protected], H.264 MVC, MPEG-4
ASP@L5, MPEG-1/2 MP@HL
Audio odecs: MP3, AAC, WAV, OGG, MIDI
This product supports Dolby Digital PlusTM
Video modes: 4k, 1080p, 1080i, 720p, (576p & 480p),
PAL, NTSC
Audio-Video Interfaces
Audi Connectors: TRRS (On adapter cable: White=Left
channel, Red=Right channel)
Output: 3V RMS
Loading: 2.5K
Composite Video Interface
Type: TRRS
Output: 8.5Vp-p
Power supply Interface
Connector: DC cylindrical 1.3mm*3.8mm
Type: plug-and-socket,DC current,center plus
(input 5V±10%)
Input: 110-240 VAC,50-60HZ, 5A MAX
Output: 5V 2A
Package
Type: cardboard box
Dimensions (approx.):
60 mm height, 215 mm width, 114 mm depth
Shipping weight: 575 gr.

The Product Unpacking and Installation
After the product extraction out of the package it is
necessary to handle it with care, do not drop, shake
it and aord other inuence. The product is designed
for horizontal allocation onto at surface.
Do not place the product onto slippery surface, in
place where it may be exposed to vibration or hazard
to drop and other possible risks to the product to be
damaged which may cause invalidation the product
guarantee.
Do not dispose the product onto soft surface like on
the carpet, bed, etc., for such surfaces cease access to
the ventilation openings and complicate air ow that
may cause the product overheating and invalidate
guarantee in result.
Do not locate the product into the furniture in
case of vacant clearance around the product is not
provided for the sucient product ventilation.
Do not place the product in place where it may be
exposed to inuence of direct sunlight, next to the
sources of open re and convectors.
Do not dispose the product on surfaces which in
operating process may get warm, for instance, video
record player or intensier and do not put anything
on the top of the shell as well. Do not cover
the product with anything.
Containing liquids objects, such as vase, plant pot
are not to be placed next to or on the product. Do
not touch or move the product during its operation.
Switch o the product if you need to shift it.
The product is intended for use indoors.
The power supply cord is to be put to prevent its
deformation and jamming and touching it well. The
power supply cord is not to be laid under the carpets
or blocked with anything where any damage may
not be noticed.
Power supply unit
The product should be used with power supply unit
provided by the manufacturer only.
The power supply unit is tted out with plug which
is intended for connecting to socket in your country
usage. In case of the necessity in the product
connecting in other country or in the region with
other data of electric circuit the power supply unit
adopted for use in the specied area should be
received from the manufacturer.
Operation
The outer power supply unit of the product is
getting warm in operation. In case of outer power
supply unit gets hot, switch o promptly and
get in touch with the equipment supplier for its
replacement.

Protection from atmospheric electricity or not
using for a long time
On coming the thunderstorm and also in case of the
product is intended to be in no use for a long time,
disconnect the power supply cord out of socket,
switch o Ethernet, video and audio cables. It is to
protect the product from thunder discharges and
power surges in the circuit.
Usage with Plasma Displays
In the product usage for watching with plasma
screens do not pause the picture for more than 5
minutes, otherwise it with other objects as may cause
‘burn-out’ pixels on the screen. It is not considered
as a defect of the product but peculiarity of plasma
screens structure. The producer does not bear the
responsibility for damages had been caused in such
manner.
The Arrangement Designation
The product is intended to select digital audio &
video channels from transport streams, decode and
display them on TV. Any other use is prohibited. It
means Telecommunication Technologies insists on
the product usage in entirely accordant to the law
of copyright. The compliance with the specied laws
leaves on conscience of the user. The unauthorized
copying of the protected materials or spreading of
the specied copies under denite conditions may
violate the law of copyright and is to be previously
adopted by possessor of the rights for the further
commercial use.
Updat ing Software
The product possesses the capability of automatic
software updating. The manufacturer and your
services provider reserve the right for automatic
software updating to improve the product functional
capability.
During the software updating the product should
not be used for watching and switched o until the
complete software updating. During the software
updating the product switching o is inadmissible.
The updating takes several minutes and since then
you are able to continue enjoy on all delights of
digital television services.

About your MAG410
1. IR-receiver
2. Indicator of stand-by mode/
Indicator of the Remote Unit
Buttons pushed
*USB 2.0–3 pcs.
1. Power Supply
2. 4-pin 3,5 mm jack, Composite
video output, Stereo line output
3. S/PDIF
4. Ethernet
5. HDMI
6. Micro SD
Front Panel
Back Panel
*

Connecting to MAG410
Warning! Switch o all the devices(TV, amplier, etc.) and take the power supply unit out of the
socket before connecting or disconnecting any cable. If the amplier is not connected leave digital
audio outputs disconnected.
Connecting with HDMI – best quality
Connecting with AUDIO/VIDEO Input – good quality
1. Red
2. White
3. Yellow

Using Remote Control to control the Device
This section explains how to unpack Remote Control
(RC) and prepare it for work. Your service provider
can supply the product with an alternative RC. In
that case please refer to the manual supplied by
your service provider. Remote Control requires
two batteries type AAA, R03, LR03, UM-4, 286.
Important information about using batteries.
Do not mix dierent types of battery or old and
new batteries.Do not use rechargeable batteries
with the remote control. Remove the batteries from
the remote control if you are not going to use it for
several weeks, to avoid the risk of leakage. Please
respect your environment and any local regulations and
dispose of old batteries in a responsible manner.
Caution! Do not attempt to recharge the
batteries.Immediately remove any leaking
batteries. Take care when handling leaking
batteries as they may cause burns to the skin
or eyes, or other physical injuries.
Introduction to the Programmable
Remote Control Unit (optional)
If MAG410 package includes a remote control with
a block of ve programmable buttons (marked with
blue print colour), then you may want to choose these
buttons for controlling other devices (TV set, amplier).
To program the buttons do the following:
• Press the «On/O» and «A/V» buttons at the same
time and hold it for 2 seconds. When the green
light of the «On/O» button will stop blinking and
willlight steadily, it means the RC is ready to learn.
• Press the button you want to «teach» — the green
light will start blinking.
• Place the infrared lamps of two RCs opposite each
other and press the button on the RC of the other
device, the function of which you wish to copy on
device RC. Hold for 2 seconds.
• After the green light two quick blinks you may
continue programming other buttons.
• Repeat the procedure described above for all
buttons you want to program for controlling
external devices.
• Press the the «On/O» and «A/V» buttons to save the
programmed data; the green light should fade o.
Reset
Press SETUP and OK buttons at same time and hold
for 2 seconds red LED will ash 5 times. Reset is done.

Record / AV
Favorites /
Programmable section
RCU Programmable RCU
(optional)

Product information
Product:
Serial Number:
MAC:
The set includes the following:
Set-Top Box
External Power Supply 5V
IR Remote Control
AAA batteries
Instruction manual
Package box
- 1 pc.
- 1 pc.
- 1 pc.
- 2 pc.
- 1 pc.
- 1 pc.
Optionally the set may include the following:
3,5 mm Jack to 3 RCA cable
LAN network cable
HDMI cable
- 1 pc.
- 1 pc.
- 1 pc.
970339