Insportline IN 8244 Varis User manual

USER MANUAL - EN
IN 8244 Recumbent inSPORTline Varis
1

CONTENTS
IMPORTANT SAFETY INSTRUCTIONS.............................................................................................................3
OVERVIEW DRAWING.........................................................................................................................................4
PARTS LIST.............................................................................................................................................................5
HARDWARE PACKING LIST...........................................................................................................................7
TOOLS..................................................................................................................................................................7
ASSEMBLY INSTRUCTIONS................................................................................................................................8
STEP 1: REAR MAIN FRAME INSTALLATION.............................................................................................8
STEP : FRONT AND REAR STABILIZERS INSTALLATION......................................................................9
STEP 3: FRONT HANDLEBAR POST AND FOOT PEDALS INSTALLATION.........................................10
STEP 4: SEAT SLIDING TUBE, BACK / SEAT SUPPORT BRACKET, AND HANDLEBAR
INSTALLATION................................................................................................................................................11
STEP 5: COMPUTER AND SEAT/BACK CUSHIONS INSTALLATION.....................................................1
OPERATING THE COMPUTER...........................................................................................................................13
ADJUSTMENTS....................................................................................................................................................14
ADJUSTING THE TENSION CONTROL KNOB............................................................................................14
ADJUSTING THE REAR STABILIZER END CAP........................................................................................15
ADJUSTING THE SEAT FORWARD OR BACK...........................................................................................15
MAINTENANCE...................................................................................................................................................15
CLEANING........................................................................................................................................................15
STORAGE..........................................................................................................................................................15
TROUBLESHOOTING..........................................................................................................................................15
WARM UP AND COOL DOWN ROUTINE........................................................................................................16
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS.........................................................18

IMPORTANT Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to change without
notice.
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following important safety instructions when
using this equipment. Read all instructions before using this equipment.
1. Read all instructions and follow it carefully before using this equipment. Make sure the equipment is
properly assembled and tightened before use.
. Before exercise, in order to avoid injuring the muscle, warm-up exercises are recommended.
3. Please make sure all parts are not damaged and fixed well before use. This equipment should be placed
on a flat surface when using. Using a mat or other covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not wear clothes that may catch
any part of the equipment; remember to tighten the pedaling straps.
5. Do not attempt any maintenance or adjustments other than those described in this manual. Should any
problems arise, discontinue use and consult your local dealer.
6. Do not use the equipment outdoors.
7. This equipment is for household use only. It is not a commercial model.
8. Only one person at a time should use this equipment.
9. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop exercising
immediately and consult your physician before continuing.
10. Care should be taken in mounting or dismounting the equipment.
11. Do not allow children to use or play on the equipment. Keep children and pets away from the
equipment while in use. This machine is designed for adults use only. The minimum free space
required for safe operation is not less than two meters.
1 . The maximum weight capacity for this product is 110 kgs.
WARNING Before beginning any exercise program consult your physician. This is especially important
for the people who are over 35 years old or who have pre-existing health problems. Read all instructions
before using any fitness equipment.
CAUTION Read all instructions carefully before operating this product. Retain this Owner’s Manual
for future reference.
3

OVERVIEW DRAWING
4

PARTS LIST
No. Description Qty
001 Front Stabilizer End Cap
00 Front Stabilizer 1
003 Cap Nut M10 4
004 Curve Washer Ø10 4
005 Screw ST4. x 5 10
006 Bolt M10x57 4
007 Front Handlebar Post Cover 1
008 Middle Section Hand Pulse Sensor Wire L=1000mm 1
009 Pan Head Phillips Self Drilling Screw ST4. x 5 6
010 Right Cover 1
011 Belt 330J6 1
01 Right Foot Pedal YH-30X 1
013 Crank 1
014 Washer Ø34.5xØ 3x .5 1
015 Bearing Nut II 7/8" 1
016 Bearing
017 Bearing Cup
018 Bearing Nut I 15/16" 1
019 Hexagon Nut 7/8" 1
0 0 Flywheel Ø 30 1
0 1 Front Main Frame 1
0 Left Cover 1
0 3 Triangle Knob M1 x55 1
0 4 Round End Cap for Handlebar Ø 5x1.5 4
0 5 Front Handlebar Foam Grip Ø30xØ 4x160
0 6 Extension Sensor Wire L=500mm 1
0 7 Extension Hand Pulse Sensor Wire I L=500mm
0 8 Computer (HR-1586) 1
0 9 Bolt M5x10 4
030 Tension Control Knob 1
031 Tension Cable L=750mm 1
03 Big Washer Ø5xØ 0x1 1
033 Bolt M5x 0 1
034 Front Handlebar Post 1
035 Bolt M8x10 5
5

036 Washer Ø8xØ16x1.5 18
037 Bolt M8x30 3
038 Rear Stabilizer End Cap
039 Idle Wheel Bracket 1
040 Curve Washer Ø8xØ 0x 3
041 Washer Ø6xØ1 x1 1
04 Washer Ø10. xØ14x1
043 Bearing 6000ZZ
044 Bolt M6x10 1
045 Big Washer Ø8xØ 0x
046 Rear Main Frame 1
047 Seat Cushion 50x345x40 1
048 Back Cushion 310x345x40 1
049 Bolt M6x15 8
050 Big Washer Ø6xØ18x1.5 8
051 Back and Seat Support Bracket End Cap 3x53x 1
05 Seat Sliding Tube 1
053 Back and Seat Support Bracket 1
054 Handlebar Foam Grip Ø30xØ 4x510
055 Screw ST4. x 0
056 Hand Pulse Sensor with Wire L=750
057 Bolt M8x45
058 Wire Plug Ø1 .1
059 Nut M6
060 Round Knob M16x1.5 1
061 Bushing
06 Right Rear Main Frame Cover 1
063 Left Rear Main Frame Cover 1
064 Rear Stabilizer Ø50x1.5x430 1
065 Bolt M6x48
066 Transport Wheel Ø 3xØ6x3
067 Nylon Nut M6
068 Handlebar 1
069 Left Foot Pedal YH-30X 1
070 Extension Hand Pulse Sensor Wire II L=1000mm
071 Sensor with Wire L=450mm 1
07 Bolt M8x15 13
073 Washer Ø40xØ 4x3 1
074 Nut M10x1
6

075 Eyebolt M6x36
076 Screw ST .9x1
077 Cap Nut M8
078 Spring Washer Ø6xØ11. x
079 Tension Bracket
080 Rubber Bolt 1
081 Nut M8 1
08 Cover Cap Ø40xØ 5x10
HARDWARE PACKING LIST
(3) Cap Nut M10
4PCS (4) Curve Washer Ø10
4PCS
(6) Bolt M10x57
4PCS
(40) Curve Washer Ø8xØ 0x
PCS
(45) Big Washer Ø8xØ 0x
PCS
(57) Bolt M8x45
PCS
(77) Cap Nut M8
PCS
TOOLS
Allen Wrench S6
1 PC Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
1 PC
7

Multi Hex Tool
1 PC
ASSEMBLY INSTRUCTIONS
STEP 1 REAR MAIN FRAME INSTALLATION
Tools
Allen Wrench S6
Remove two M8x30 Bolts (37), four M8x15 Bolts (7 ), and six Ø8xØ16x1.5 Washers (36) from the Rear Main
Frame (46). Remove bolts with the S6 Allen Wrench provided.
Connect the Middle Section Hand Pulse Sensor Wires (8) from the Rear Main Frame (46) to the Extension Hand
Pulse Sensor Wires II (70) from the Front Main Frame ( 1).
Attach the Rear Main Frame (46) into the Front Main Frame ( 1) with two M8x30 Bolts (37), four M8x15 Bolts
(7 ), and six Ø8xØ16x1.5 Washers (36) that were removed. Tighten bolts with the S6 Allen Wrench provided.
8

STEP 2 FRONT AND REAR STABILIZERS INSTALLATION
Tools
Multi Hex Tool
Hardware
(3) Cap Nut M10
4PCS (4) Curve Washer Ø10
4PCS
(6) Bolt M10x57
4PCS
Position the Front Stabilizer ( ) in front of the Front Main Frame ( 1) and align bolt holes.
Attach the Front Stabilizer ( ) onto the front curve of the Front Main Frame ( 1) with two M10 Cap Nuts (3),
two Ø10 Curve Washers (4), and two M10x75 Bolts (6). Tighten cap nuts with the Multi Hex Tool provided.
Position the Rear Stabilizer (64) behind the Rear Main Frame (46) and align bolt holes.
Attach the Rear Stabilizer (64) onto the rear curve of the Rear Main Frame (46) with two M10 Cap Nuts (3), two
Ø10 Curve Washers (4), and two M10x75 Bolts (6). Tighten cap nuts with the Multi Hex Tool provided.
You may turn the Rubber Bolt (80) and M8 Nut (81) on the Rear Main Frame (46) as needed to level the
recumbent bike.
9

STEP 3 FRONT HANDLEBAR POST AND FOOT PEDALS INSTALLATION
Tools
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Allen Wrench S6
Remove one Ø8xØ 0x Curve Washer (40), one M8x15 Bolt (7 ), four M8x10 Bolts (35) and four Ø8xØ16x1.5
Washers (36) from the Front Main Frame ( 1). Remove bolts with the S6 Allen Wrench provided.
Slide the Front Handlebar Post Cover (7) up to the Front Handlebar Post (34).
Insert the Tension Cable (31) through into the bottom hole of Front Handlebar Post (34) and pull it out from the
square hole of Front Handlebar Post (34).
Connect the Sensor Wire (71) and Extension Hand Pulse Sensor Wires II (70) from the Front Main Frame ( 1) to
the Extension Sensor Wire ( 6) and Extension Hand Pulse Sensor Wires I ( 7) from the Front Handlebar Post
(34).
Insert the Front Handlebar Post (34) onto the tube of the Front Main Frame ( 1) and secure with one Ø8xØ 0x
Curve Washer (40), one M8x15 Bolt (7 ), four M8x10 Bolts (35) and four Ø8xØ16x1.5 Washers (36) that were
removed. Tighten bolts with the S6 Allen Wrench provided. Slide the Front Handlebar Post Cover (7) down to
the Front Main Frame ( 1).
Remove the Ø5xØ 0x1 Big Washer (3 ) and M5x 0 Bolt (33) from the Tension Control Knob (30). Remove
bolt with the Multi Hex Tool with Phillips Screwdriver provided.
Put the cable end of resistance cable of Tension Control Knob (30) into the spring hook of Tension Cable (31) as
shown in drawing A of figure 3. Pull the resistance cable of Tension Control Knob (30) up and force it into the
gap of metal bracket of Tension Cable (31) as shown in drawing B of figure 3. Attach the Tension Control Knob
(30) onto the Front Handlebar Post (34) with the Ø5xØ 0x1 Big Washer (3 ) and M5x 0 Bolt (33) that were
removed. Tighten bolt with the Multi Hex Tool with Phillips Screwdriver provided.
FOOT PEDALS INSTALLATION
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and “L” for Left.
Insert the pedal shaft of Left Foot Pedal (69) into threaded hole in the left Crank (13). Turn the pedal shaft by
hand in the counter-clockwise direction until snug.
Note DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the threads.
10