Insportline IN 8947 User manual

1
USER MANUAL –EN
IN 8947 Vibration Plate inSPORTline Charles

2
CONTENTS
INTRODUCTION .................................................................................................................................................. 3
PARTS.................................................................................................................................................................... 3
EXPLODED VIEW ................................................................................................................................................ 4
PARTS LIST........................................................................................................................................................... 5
ASSEMBLY ........................................................................................................................................................... 8
OPERATION INSTRUCTIONS ............................................................................................................................ 9
SAFETY CAUTIONS .......................................................................................................................................... 11
MAINTENANCE ................................................................................................................................................. 13
HOW TO STORE ............................................................................................................................................. 13
SELF-MAINTENANCE................................................................................................................................... 14
CLEANING ...................................................................................................................................................... 14
PRODUCT SPECIFICATION.............................................................................................................................. 14
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS ....................................................... 14

3
INTRODUCTION
Thank you for purchasing vibration plate. Please read the operation manual thoroughly before you begin
operating the machine. This operation manual should be kept available for future reference after you have read it
through.
SC class (according to EN957) for home and club use
Our company has the absolute right to alter the design pictures and material color without prior notice.
Design, pictures and material color seen in this manual is solely for illustration purpose.
PARTS
1. Support Tube
2. Base
3. Screw (M6x15)
4. Screw (M8x20)
5. Upper Handrail
6. Screw (M6x45)
7. Screw (M6x30)
8. Lower Handrail
9. Console

4
EXPLODED VIEW

5
PARTS LIST
No.
Name
Qty
1
Foot skin
1
2
Inner hexagon cylindrical screw
11
3
Washer
11
4
Footplate
1
5
Ornament of straps
2
6
Switch
1
7
Socket
1
8
Metal clip for fixing ornament of straps
2
9
Hexagon nipples
4
10
Strengthening rod components
1
11
Base casing
1
12
Rubber sleeve
1
13
Bearing sleeve
1
14
Deep groove ball bearing
1
15
Eccentric block
1
16
Inner hexagon cylindrical screw
1
17
Inner hexagon cylindrical screw
4
18
Spring washer
4
19
Washer
4
20
Insulation sleeve of spiral motor
4
21
Inner hexagon cylindrical screw
2
22
Spring washer
2
23
Washer
2
24
Footplate bracket assembly
2
25
Deep groove ball bearing
2
26
Vibration absorber
11
27
The whole footplate
1
28
Washer
11
29
Spring washer
11
30
Inner hexagon cylindrical screw
11
31
Epoxy washer
4
32
Spiral motor
1
33
Big washer
4
34
Spring washer
4
35
Hexagon nipple
4

6
36
Oscillation motor
1
37
Motor insulation pad
1
38
Hexagon nipple
4
39
Big washer
4
40
Insulation washer of motor seat
4
41
Motor seat
1
42
Insulation pad of motor seat
2
43
Washer
4
44
Spring washer
4
45
Inner hexagon cylindrical screw
4
46
Hexagon nipple
2
47
Spring washer
2
48
Flat washer
2
49
Locating sleeve
2
50
Axle of connecting rod
1
51
Bracket of connecting rod
1
52
Clamp spring of axle
1
53
Connecting rod
1
54
Deep groove ball bearing
2
55
Connecting rod cap
1
56
Phill disk head screw
5
57
Aluminum bearing seat
1
58
Deep groove ball bearing
2
59
Woodruff key
1
60
Eccentric shaft
1
61
Clamp spring of axle
2
62
Belt pulley
1
63
Clamp spring of axle
1
64
Motor belt
1
65
Phill disk head screw
4
66
PCB controller
1
67
Metal base plate
1
68
Washer
6
69
Spring washer
6
70
Inner hexagon cylindrical screw
6
71
Phill disk head self-tapping screw
9
72
Washer
4
73
Spring washer
4

7
74
Inner hexagon cylindrical screw
4
75
Adjustable feet
5
76
Washer
4
77
Spring washer
4
78
Inner hexagon cylindrical screw
4
79
Washer
6
80
Spring washer
6
81
Inner hexagon cylindrical screw
6
82
Upper handrail protection foam
1
83
Upper handrail
1
84
Main control panel sticker
1
85
Phill disk head self-tapping Screw
4
86
BMI sensor chip
2
87
Main control Panel
1
88
Display PCB
1
89
Phill disk head self-tapping screw
3
90
Column
1
91
Phill disk head self-tapping screw
4
92
Handrail front plastic cover
2
93
Inner hexagon disk screw
2
94
Flat washer
2
95
Inner hexagon cylindrical screw
4
96
Handrail flange plastic cover
2
97
Handrail flange protection foam
2
98
Handrail flange locating rod
2
99
Inner hexagon disk screw
2
100
Flat washer
2
101
Handrail back plastic cover
2
102
Lower handrail tube
2
103
Inner hexagon disk screw
8
104
Column location pin
4
105
Washer
8
106
Lower handrail protection foam
2
107
Lower control panel
1
108
Phill disk head self-tapping screw
4
109
Lower control sticker
1
110
Inner hexagon disk screw
4
111
Washer
4

8
112
Plug
1
113
Column LED PCB
1
ASSEMBLY
STEP 1: Take out the support tube (1) and main base (2) from packing carton. Connect
the upper and lower signal cable.
STEP 2: Put the support tube (1) into the base (2). Lock them with screws (4) and
install the feet cushion.
STEP 3: Install the upper handrail (5) on the support tube with screw (8).
STEP 4: Take out lower handrail (9) and install with screw (3) and (7) as picture.

9
This is final assembled picture.
OPERATION INSTRUCTIONS
UPPER CONSOLE
MIDDLE CONSOLE
UPPER CONSOLE OPERATION
1.
Press this button to switch the time or speed display during the machine.
2. MODE window
Display the current mode of machine, manual or automatic.
3. TIME / H-SPEED
window
Display the time countdown or oscillation speed. Switch the display mutually.
4. H/L SPEED window
Oscillation or spiral vibration speed display, switch the display mutually.

10
5.
Oscillation speed +
In manual mode, press this button to increase the oscillation speed, the speed
range is 1 to 60 level.
6.
Oscillation speed -
In manual mode, press this button to reduce the oscillation speed, the lowest is 1
level.
7.
Time
Set the running time of the machine. This is the total time the machine is running.
When the running time reaches the set value the machine will automatically stop
running.
Setting method: The default time is 10 minutes. When you select the manual
mode, press this button before the machine is running, then press button “H+” or
“H-“ to increase or reduce oscillation running time, press “L+” or “L-“ to increase
or reduce the spiral vibration running time. After setting the time, press Start/Stop
button, the machine run at the current set time, the machine automatically stops
after the countdown time.
8.
MODE
Loop select during “HL, P1, P2, P3”. “HL” is manual mode，P1\P2\P3 are
automatic mode. In manual mode, manually increase or reduce the speed levels; In
automatic mode, the machine runs at pre-setting time and speed. In standby state,
select the mode, then press button 11 or 16 to start-up, the machine will run at the
current mode.
9.
Spiral vibration
speed +
In manual mode, press this button to increase the spiral vibration speed, the speed
range is 1 to 60 level.
10.
Rychlost spirálních
vibrací -
Spiral vibration speed down: In manual mode, press this button to reduce the
spiral vibration speed, the lowest is 1 level.
11.
Start/Stop
Start or Stop the machine.
MIDDLE CONSOLE OPERATION
12.
MODE
Loop select during “HL, P1, P2, P3”, the function are same with upper console.
13.Display window
Display the current mode or speed or time.
14.
Speed +
In manual mode, increase the oscillation & spiral vibration speed at the same time.