Instant Desks IDA-8401 User manual

Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
ASSEMBLY INSTRUCTIONS
MODEL IDA-8401


A B
-Top Panel Lower ▪ Lower
▪ Stand Panel Lower
FG
▪ Front Crossbar
Lower
H
▪ Leg Crossbar
Right & Left x 2
C
▪ Side Panel Left Lower
D
▪ Side Panel Right Lower
I
▪ Leg Crossbar
Back - Front Leg Left
- Front Leg Right - Back Leg Left - Back Leg Right
KL
J
E
▪Partition Panel Upper ▪ Side Panel Left
Upper
PQ
O
M N
▪Top Panel Upper ▪Bottom Panel Upper
RS
▪Drawer Side
Panel Left - B x 2
▪Drawer Side
Panel Right - B x 2
S2 S3
S1 S4
T
▪Drawer Side
Panel Left - S x 5
▪Drawer Side
Panel Right - S x 5
T2 T3
T1 T4
U
-Drawer Bottom
Panel - S x 3
U2 V
U1
▪ Side Panel Right
Upper
▪ Stand Panel
Upper x 3 ▪ Drawer Front - B x 2
▪ Drawer Front - M
x 2
▪ Drawer Front-S x 3
S5
▪


PART QTY. ITEM
1 10Pcs Wooden Pin
6x25mm
38Sets
4
8Pcs Screw - 3.5 x 15mm
5Hole Covers
3
10Pcs
7
16Pcs Screw - 4 x 38mm
Cam Lock &
Bolt Sets
15mm
20Pcs Screw - 4 x 30mm
6
2Sets Drawer Metal
Sliders Set
8
4Pcs
9
10
7Sets
8Pcs Screw - 5 x 8mm
11
270Pcs Wooden Pin
8x25mm
10Sets
Cam Lock &
Bolt Sets
12mm
Attention : Holes on panels may be hidden underneath PVC laminate!!!
Do not tighten the screws until all of them are in the right position.
Plastic Feet
Handle ( 2293 )
M4x20mm
Handle Screw
12

1
- Install all the thick wooden pins (2) into the panels shown in the illustrations, but please make sure
to insert them in the correct holes as some holes are intended for cam bolts in subsequent steps.
2
T1
T1
T1 T1
T1 T2
T2
T2
T2
T2
1
2x70
B
CD
EF
G
G
H
NO
P
Q
RRR
S1
S1
S2
S2
2
- Install all the thin wooden pins (1) into the panels shown in the illustrations, but please make sure
to insert them in the correct holes as some holes are intended for cam bolts in subsequent steps.
1x10

3
Attach Bolts (4) to all panels as shown, but please make sure to insert them in the
correct holes as some holes are intended for the wooden pins in subsequent steps.
4
- Attach Bolts (3) to all panels as shown, but please make sure to insert them in the correct
holes as some holes are intended for the wooden pins in subsequent steps.
3
4x38
KLIJ
S
S
PQ
MO
CD
B
A
4
3x10
UUU
TT

5
Assemble the FLAT shaped drawer sliders (9) to the panels (C), (D) and (E) using screws
(12) as shown. In panel (E), the sliders attach on both sides of the panel. Set aside the "L"
shaped drawer sliders as they will be used until step 19.
6
secure with (4)
12
9
E
E
CD
RIGHT VIEW
LEFT VIEW
BE
9
x8 x2 Sets
12
x1
4
4

7
secure with (8)
8
Position all the panels as shown in both illustrations, paying close attention
to the orientation of legs (K) and (L), and then assemble the panels using
Cam Locks (4) as shown.
8
F
CK
I
G
DJ
G
L
x1
8
4
x8
4

9
secure with
6 Pcs (4)
10
secure with 8 Pcs (4) as shown.
10
H
B
FD
L
C
K
4
-Attach all Plastic Feet (10) to Leg (I), (J),(K) & (L) as shown.
I
J
A
4
x6
4x4
10
x8
4

11
secure with (8)
12
secure with (8)
13
secure with (4)
8
R
R
O
R
N
8
4
x2
8
x1
4
x1
8
(The unnished side of “O” faces outwards)
(The unnished side of “N” faces
outwards, and its groove faces down)

14
secure with 4 Pcs (4)
15
Turn the assembled pieces over again, and assemble panel (M) secure
with 4 pcs of Cam Locks (4) as shown.
16
▪ Turn the assembled pieces over, and insert back panel (V) with its nished
side facing outwards as shown.
4
P
V
M
Q
4
x4
4
x4
4
(The unnished side of “V” faces outwards)
(The groove on "M" faces down).

17
19
-Assemble the “L” shaped sliders (9) to the
bottom of the drawers using screws (6) as shown.
Please refer to the illustration for the correct
installation, because if they protrude at the
bottom, the drawer will raise about 1” and the
drawer won't t in the unit.
-Assemble drawer back panel (S3),
secure with screw (8) as shown.
-Attach Hole Covers (5) to panels (S1) &
(S2) as shown.
18
20
S4
S2
S5
S1
8
S3
9
6
9
6
511
S
-Install Handle with screw (11) to panel (S)
as shown.
S
S2
S1
x3
4x5
8
Left
x4
6
x1 Set
9x2
5
x1
11
-Repeat steps 17 to 20 for the second
large drawer.

21
23
-Assemble drawer side panel (T1) & (T2) to
drawer front (T), secure with Cam Locks (3)
as shown.
-Assemble drawer back panel (T3),
secure with screw (7) as shown.
-Insert drawer bottom panel (T4) as shown.
22
24
T2
T1
T4
T
T3
7
11
T
-Repeat steps 21 to 24 for the second
medium drawer.
3
x4
7
x2
3
x1
11
-Install Handle with screw (11) to panel (T)
as shown.

25
27
-Assemble drawer side panel (T1) & (T2) to
drawer front (U), secure with Cam Locks (3)
as shown.
-Assemble drawer back panel (U1),
secure with screw (7) as shown.
-Insert drawer bottom panel (U2)
as shown.
-Repeat steps 25 to 28 for the other two
small drawers.
26
28
U2
T2
T1
U
U1
11
7
U
x2
3
x4
7
x1
11

29
- secure with (8)
30
-Place all Drawers into cabinet as shown.
5
8
-Attach 6 Pcs Hole Covers (5) to panels (G) & (H) as shown.
G
H
G
U
T
S
U
U
T
S
x6
5x2
8