Instant Desks IDA-B002 User manual

Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
MODEL RT -B00
MODEL: IDA-B002
MODEL: IDA-B002

0
MODEL: IDA-B002
MODEL: IDA-B002
Gracias por comprar uno de nuestros productos.
Por favor lea cuidadosamente las instrucciones de ensamblaje antes de
instalar la unidad.
Por favor guarde este manual para referencias futuras.
MODELO RTA-B 2

DIMENSIONS
MAXIMUM WEIGHT CAPACITIES
exceed this limit
Please use care and good judgement
when placing objects on wood surface
Product Size: 22"W x 16"D x 30.5~46.5"H
Lowest position Highest position
Do not
P : 3

x4
x2 x2
x2
x2
P : 4
12
5
6
9
8
11
11
12
10
7
13 12
34
56
78910
11 12 14
11A
12B
Plastic Cover
Pieza Plastica
Screw Knob
Tornillo de adjuste

P : 5

P : 5P : 5
P : 6
30mm

P : 7

P : 8
1
5
46
Use bolts D to x the Mid Panel (6), Back panel (4) back panel (5) to the left panel (1).
Make sure to tighten the cam locks on the inside face of the panels (6,4&5) to secure the bolts.
Use bolts to x the right panel (2) to the semi structure builts in Step 1 making sure
to tighten the cam locks on the inside face of the panels (6,4 & 5) to secure the bolts.
2
5
46

P : 9
X2
X2
3
3
Use bolts D to x the B bottom panel (7) to the semi structure built in Step 2 making
sure to tightenthe cam locks on the inside face of the panels (1,4 & 2) to secure the bolts.
12
4
7
7

P : 10
1
2
4
8
Use Bolts D to assemble te top Panel (8) over the back, laft and right panels (4, 1, 2).
Make sure to tighten the cam locks on the inside face of each panel
9
2
17

P : 11
11A
9
10
11B
11B
Place the Plastic Cover (11A) on top of
the lateral structure tubes (9).
Insert the top structure tubes (10) into the
plastic cover (11A),then screw in the knob (11B)
into the plastic cover (11A)

P : 12
10
10
12
13
12
Use screws B to x the protector tube (13) to the
Mian panel (12).
Tighten all screws well and enjoy your
unit. You can adjust the height of the
main panel with the screw knobs.

English
- NO EXPONGA LAS SUPERFICIES A LA LUZ SOLAR DIRECTA,
O A CONDICIONES AMBIENTALES EXTREMAS. ESTE TIPO DE
DAÑOS NO SON CUBIERTOS POR LA GARANTÍA DEL PRODUCTO.
- NO USE SOLVENTES SOBRE LAS SUPERFICIES O TUBOS
ESTRUCTURALES. LAS SUPERFICIES DEBEN SER LIMPIADOS
CON UN JABÓN SUAVE Y AGUA, Y SECADOS IMMEDIATAMENTE
CON UNA TOALLA LIMPIA Y SECA.
- PRODUCTOS QUE SON PESADOS DEBEN LEVANTARSE O
MOVERSE POR AL MENOS 2 PERSONAS, Y TODOS LOS
OBJETOS DEBEN SER REMOVIDOS DEL PRODUCTO.
- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR
EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL
DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE
WARRANTY.
- DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL
TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF
A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY
TOWEL.
- PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED
BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE
REMOVED FROM THE PRODUCT.
CARE AND MAINTENANCE
Spanish

Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
MODEL RT -B00
MODEL: IDA-B002
MODEL: IDA-B002