
Linear stand charging stations - Operating instructions V04
4 INTEGRA Biosciences AG
Table of Contents
1 Introduction ................................................................................................................ 4
2 Installation .................................................................................................................. 4
3 Disposal ..................................................................................................................... 6
4 Accessories................................................................................................................ 6
1 Introduction
1.1 Intended use
The linear stands are used to hang up your INTEGRA Biosciences pipettes.
The charging station and the charging/communication station, here charging stations for
short, are mounted on the linear stand (#3214 or #3215) to charge VIAFLO/
VOYAGER electronic pipettes from INTEGRA Biosciences. Using the charging/
communication station, the pipettes can be connected to VIALINK via a PC. VIALINK
allows the user to upload/download custom programs, images, firmware updates and
service history to and from VIAFLO and VOYAGER pipettes.
The charging stations have been designed for use in a laboratory. They shall be used in
a dry and dust-free location with a temperature of 5–40 °C and a maximal (non-
condensing) relative humidity of 80 %.
1.2 Safety notes
1) Do not use the charging stations in an atmosphere with danger of explosion.
2) Use an original INTEGRA Biosciences mains adapter (#3216) only.
3) Prolonged exposure of charging stations to UV-light can cause discoloration and/or
yellowing of the plastic housing. This will not affect the performance of the device in
any way.
Please visit our website www.integra-biosciences.com on a regular basis for up to date
information regarding REACH classified chemicals contained in our products.
2 Installation
2.1 Assembling the linear stand
Push the upper ends of the two support
feet into the connecting rail (a).