Intellinet 501620 User manual

Rackmount
console
kVm switch
quick
install
guide
MODEL 501620
INT-501620-QIG-0408-01

2
2
intRoduction
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™Rackmount
Console KVM Switch, Model 501620 (15” LCD, 8-port).
Manage up to eight PS/2 or USB computers from one keyboard, monitor and
mouse, all housed in an industry-standard 19” 1U-height rack drawer. The space-
saving console is easily pulled out and accessed in the extended position, and
the display can be folded down, locked and secured when stored. Plus, when
the console is cascaded with other KVM switch modules to increase server
management capacity, you save even more space.
The Rackmount Console KVM Switch comes with a universal CEN36 connector
for connection between the console drawer and a KVM switch module. This
modularized design offers maximum flexibility, as you can choose and swap
the modules to fit your needs. A KVM switch module can also be used as an
independent KVM switch.
This quick installation guide shows you how to assemble and position the rackmount
console. Follow the steps for quick and easy installation and you’ll soon be enjoying
these additional popular features:
• Flip-open 15” LCD panel supports 1024 x 768 resolution
• For rack cabinets with depth from 67.5 to 80.5 cm (265 /
8
” to 315 /
8
”)
• Full 105-key, low-profile, sturdy keyboard
• Ergonomic hand-rest design
• Ultra-sturdy, tilt-free, 2-piece rear bracket and extension design
• OSD control and adjustment
• Cascadable to all INTELLINET NETWORK SOLUTIONS Rackmount PS/2 KVM
switches for expansion
• Auto-scan automatically selects computers sequentially
• Supports Microsoft IntelliMouse (Pro)
• Supports both PS/2 and serial mouse
• Assign computers unique and meaningful names
• Programmable scan filters unused computers
• Store system settings and name entries to non-volatile memory
• Password security protects computers from unauthorized use
• Gain complete control with easy-to-use OSD interface
• Hotkey functions allow easy computer access
• Keyboard states automatically saved and restored when switching computers
• Operating system independent, transparent to all applications
• Plug and Play system configuration
• Keyboard and mouse can be hot plugged at any time
• DDC2B compatible
• Includes one set of 1.8 m (6 ft.) connection cables for PS/2 computer
• Lifetime Warranty

3
console assembly
Parts
Three-Section
Console:
A. 1U slide drawer with keyboard,
touchpad and
LCD monitor.
B. 1U KVM
Switch Module.
C. Rear bracket and
extension kit.
Rear Bracket and Extension Kit:
Each Rackmount Console KVM Switch
features a rear bracket and extension
kit, which includes two pieces of rear
brackets and two pieces of extensions.
The enclosed kit fits cabinet depths of
67.5 – 80.5 cm (26 5 /
8– 31 5
/
8”), as
measured between the inside of a rack cabinet’s front
and rear uprights. As shown at right, the brackets and
extensions come in different lengths, and will vary
depending on the model.
Assembly
1. Choose a proper position
for the rack drawer. Mount
the rear brackets (from the
rear bracket and extension
kit), and loosely fasten
them onto the rear vertical
uprights of the cabinet as
shown. Both will be
removed later.
3

4
2. Remove the safety stopper
from the console drawer.
CAUTION: The stopper is
designed to keep the drawer
from sliding out during
transportation; othwewise,
the drawer could slide out.
3. Slide the console drawer
into the rack cabinet from
the front and insert the two
slide rails of the console
drawer into the sleeves of
the rear brackets.
4. Fasten the console drawer
to the outside of the front
vertical uprights using the
four screws provided. The
metal brackets (as indicated
by the far arrow) support the
rear side of the console.
NOTE: The image at right is
a front (console drawer-side)
view.
5. Remove both rear brackets
and slide the drawer halfway
out to balance its weight.
(The front brackets hold the
drawer.) NOTE: The image
at right is a rear (KVM switch
module-side) view.
6. Attach the extensions
(from the rear bracket
and extension kit) to
both sides of the KVM
switch module. Note
that the wider lip is
the top of the plastic
extension.
4

55
7. The rear brackets, extensions and slide rails need to fit tightly. As shown
above-left, slide the rear brackets onto the extensions. Then, as shown above-
right, insert both sliding rails of the console drawer into the tight space
formed by the rear brackets and the extensions. Holding the KVM switch
module on both sides, push it in evenly.
8. Push the rear brackets all the
way in and fasten them
securely.
9. Slide the drawer out to
access the connecting
screws. Push the KVM switch
module evenly toward the
connector attached to the
console drawer and lock
both units together by
tightening the screws
indicated by the arrows.
10. Make sure the CEN36 connectors are firmly mated
connector is secured firmly,
leaving a slight gap as
shown in the image at right.
11. Connect the power supply
to the power jack on the
KVM switch module to
complete the installation.
CEN36

6
6
5
46
89
7
10
console installation
Connecting
to a
Computer
Connecting
to a KVM
Switch
Console Panel
The console panel of the switch is located along the top of the keyboard.
KVM Control and Status Indicators:
NOTE: This section is effective only when a KVM switch module is connected.
1. Computer Selection Pad — Press one of these buttons to select a computer.

77
NOTE: If this 8-port model is used in conjunction with a 16-port model, you
may see a keyboard labeled with “A”–”H” in addition to “1”–”8” (as shown).
“1”–”8” are for the lower row of eight ports; “A”–”H” are for the higher/upper
row. Port 1 and Port A share the same button: If Port 1 is already selected,
tap its button to select Port A. If Port 1 is not selected, press and hold the “1”
button on the console panel for two seconds to select Port A.
2. Selected Computer Indicator — An indicator lights red when its corresponding
computer is selected.
3. Local Console in Operation — This lights green when a computer is accessed
through the console.
4. Remote Console in Operation — This lights green when a computer is accessed
by a remote keyboard/mouse/monitor set.
LCD Panel Controls:
5. LCD Panel Menu — These buttons bring up the on-screen display menu of
settings for the LCD panel.
6. LCD Panel Adjustment — These let you adjust the settings for the LCD panel.
7–9. Number lock, caps lock and scroll lock indicators, respectively.
10. LCD panel power switch.
specifications
Standards
• PS/2, USB
• Compatible with
Windows, MAC, Unix
General
• PC connections: 8
• Cable type: special 3-
in-1, HD15 for PS/2 or
for USB (sold separately)
• Console connections: 1
• PC port connectors:
- Keyboard + mouse +
monitor: HD15 x 8
• Console port connectors:
- Keyboard: PS/2
- Mouse: PS/2
- Monitor: HD15 female
• Computer selection:
- Via buttons
- Via hotkeys
- Via Windows switching
software client
• Maximum number of
cascadable PCs: 64
(when cascaded with
models of same type)
• OSD: yes
• Automatic scan interval:
3, 8, 15, 30 seconds
• Programmable scan
pattern
• Cable length maximum:
30 m (100 ft.) at console;
15 m (50 ft.) at PC ports
for PS/2; 5 m (16 ft.) at
PC ports for USB
• VGA bandwidth: 1920
x 1440, DDC2B
• LCD KVM drawer
connector: CEN36
• Video resolution: max.
1024 x 768
• FCC Class B, CE, RoHS
Power
• 12 V DC, 3 A (connected
to LCD drawer)
• 9 – 12 V DC, 500 mA
(not connected to LCD
drawer)
• Power consumption:
max. 500 mA
LCD Panel Specifications
• Active display area:
304.1 x 228.1 (mm)
• Pixel pitch (mm): 0.297
(H) x 0.297 (V)
• Resolution: 1024 x 768
@ 60/70/75 Hz
• Color pixel arrangement:
RGB vertical strip
• Display mode: normally
white
• Brightness (cd/m^2):
250 (center)
• Contrast ratio: 350:1
• Display color: 16.2M
colors (RGB 6-bits +
FRC data)
• User control: OSD control
(auto saving)
• Input signal: RGB analog,
H/V separate
• Plug and Play VESA:
VESA DDC 1/2B
• Power consumption
(max): 33 W (normal
operation/typical)
• Viewing angle (typical):
-70 – 70 (H); -60 – 60
(V) (typical)
• Backlight unit: 2 CCFLs
edge-light (top/bottom)
• Power supply input
voltage: full range,
100 – 240 V AC
Environmental
• KVM module dimensions:
40 (H) x 404 (W) x
114 (D) mm (1.6 x 15.9
x 4.5 in.)
• Weight: 18.8 kg
(41.44 lbs.)
• Operating temperature:
0 – 50°C (32 – 122°F)
• Operating humidity:
8 – 95%
• Storage temperature:
-20 – 60°C (-4 – 140°F)
• Storage humidity: 95% RH
Package Contents
• Rackmount Console
• Rear bracket and
extension kit
• KVM Switch Module
• Power adapter
• One 1.8 m (6 ft.) PS/2
3-in-1 cable
• One 1.8 m (6 ft.) USB
3-in-1 cable
• Console quick install
guide
• CD with KVM Switch
Module user manual
Add’l Cables Required
(sold separately)
• PS/2 3-in-1 KVM Cable,
1.8 m (6 ft.): 502535
• PS/2 3-in-1 KVM Cable,
3.0 m (10 ft.): 503303
• USB 3-in-1 KVM Cable,
1.8 m (6 ft.): 502242
• USB 3-in-1 KVM Cable,
3.0 m (10 ft.): 503327

INTELLINET NETWORK SOLUTIONS™offers a complete line
of active and passive networking products.
Ask your local computer dealer for more information or visit
www.intellinet-network.com.
Copyright © INTELLINET NETWORK SOLUTIONS
All products mentioned are trademarks or registered trademarks of their respective owners.