Intermatic eco CI7 User manual

eco CI7 and CG7
EN Operating manual

This manual ensures safe and efficient use of the
“eco CI7” and “eco CG7” timers (referred to as “device”
in the following). This manual is a component of the
devices and must remain accessible at all times for
everyone who uses the devices.
Everyone who uses the devices must have read and
understood this manual before commencing any work.
The basic prerequisite for working safely is compliance
with all safety instructions and usage instructions speci-
fied in this manual. Furthermore, the local accident pre-
vention regulations and the general safety regulations in
the area in which the devices are operated apply.
2

Illustrations in this manual are intended to provide a gen-
eral understanding and may differ from the actual
design.
Copyright
This manual is copyright protected.
Handover of this manual to third parties, reproductions of
any type and form – including excerpts – and use and/or
disclosure of the content without the written permission
of Intermatic (referred to as “manufacturer” in the
following), except for internal purposes, is not permitted.
Violations will result in liability for compensation. The
manufacturer reserves the right to assert additional
claims.
EN
3

The copyright is held by the manufacturer.
©Intermatic Incorporated
1950 Innovation Way, Suite 300
Libertyville, IL 60048
USA
Declaration of conformity and download instructions
The declaration of conformity for the devices described in
this manual, a download of the manual, and the technical
data can be found at www. intermatic.com.
4

Overview................................................ 7
Safety................................................... 19
Installation............................................ 22
Configuration....................................... 45
Menu structure........................................... 45
Setting the time and date............................ 52
Programming....................................... 56
Selecting the predefined programmes........ 56
Changing the predefined programmes........ 59
Creating an individual switching program... 70
EN
5

Deleting a programme................................ 72
Selecting summer/winter time.................... 75
Selecting the operating mode..................... 77
Disposal............................................... 79
6

Overview
Fig. 1: Insert
1 Display of day blocks/days
2 Display of on/off times
3 Display of the current time
EN
7

Fig. 2: Rear view of “eco CI7”
1 Mounting holes
2 Flexible union fittings for cable feed-through
8

Display Function
Set the time format (24 h or 12 h)
Set summer or winter time
On/off time memory space
Switch between automatic mode, perma-
nently on, permanently off
Automatic mode
Prog. Switching programme is displayed
qLights up in automatic mode via and
when permanently ON via
EN
9

Button Function
+ Press briefly to increase value by 1
Press and hold to increase value by 5
Only in operating mode:
Switch between automatic mode, perma-
nently on, permanently off
− Press briefly to reduce value by 1
Press and hold to reduce value by 5
Menu Start/exit programming mode; return to
automatic mode
OK Confirm programming
10

Button Function
Res. Reset device to factory settings
+1 h Switch between summer and winter time
EN
11

Description of function
The “eco CI7” and “eco CG7” timers are digital single-
channel synchronous timers that switch connected loads
on and off at defined times. The times are either set by
means of a predefined switching programme or in an
individually defined switching pro-gramme. There are 20
memory spaces available for all switching programmes,
both predefined or individual; 10 of these are switch-on
times and 10 are switch-off times.
12

On delivery, three profiles – P01, P02 and P03 – are pre-
defined on the device, each with different switching
times. The times of these profiles can be copied,
adjusted and/or amended. All three profiles apply to all
seven days of the week. The following profiles are prede-
fined:
EN
13

Fig. 3: Predefined profiles P01, P02, P03
P01 07:00 – 20:00 (Mon – Sun)
P02 07:00 – 12:00 and 14:00 – 20:00 (Mon – Sun)
P03 07:00 – 12:00, 14:00 – 18:00 and 20:00 – 22:00
(Mon – Sun)
14

In addition, you can use the P-- individually program-
mable switching programme. Here, you define all the
times individually.
Each changed or individual time is assigned to the seven
days of the week in the form of day blocks or individual
days:
EN
15

Day blocks or days
Mon –
Sun Mon – Sat Mon – Fri Sat – Sun Indiv. days
Mon
1
Tue 2
Wed
3
Thu 4
Fri 5
16

Mon –
Sun Mon – Sat Mon – Fri Sat – Sun Indiv. days
Sat 6
Sun 7
Contents
The following components are included in the contents:
Number Designation
1 “eco CI7” or “eco CG7”
4 Screws
EN
17

Number Designation
2 Strain relief clamps
4 Wire end sleeves
18

Safety
Intended use
The device is used exclusively for switching connected
loads e.g. heating systems, pumps, motors and machines
with a resistance load of up to 16 A. The
connected devices must comply with the limits specified
in the technical data.
The “eco CI7” and “eco CG7” timers may only be used in
private and commercial areas at ambient temperatures
from -10 °C to +55 °C.
The intended use also includes compliance with all
information specified in this manual. Any use other than
the intended use is considered incorrect use.
EN
19

Residual risks
WARNING!
Danger to life due to electric shock!
Improper assembly and installation of the
device may result in life-threatening electrical
voltages.
− Have assembly and connection performed
by a qualified electrician only.
20