International Concepts T-3030T User manual

ITEM: T
-
3030T, T
-
30
42T, T
-
3048T, T
-
3636T, T
-
4242T AND
T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S
REVISED SEP 24, 2014
Printed in Vietnam
- 1 – THIS ITEM IS PACKED IN 2 CARTONS
ASSEMBLY INSTRUCTIONS
T-3030T, T-3042T, T-3048T, T-3636T, T-4242T/T-330T, T-336T, T-342T
T-3030T, T-3042T, T-3048T, T-3636T, T-4242T/T-30S, T-36S, T-42S
Description: FIXED TOP TABLE
Item no : T-3030T, T-3042T, T-3048T, T-3636T, T-4242T AND
T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S
“PACKED IN SEPARATE BOX”

ITEM: T
-
3030T, T
-
30
42T, T
-
3048T, T
-
3636T, T
-
4242T AND
T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S
REVISED SEP 24, 2014
Printed in Vietnam
- 2 – THIS ITEM IS PACKED IN 2 CARTONS
BEFORE ASSEMB
LY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your
table. Protect the surface of the table with cloth if you are using any product with rubber feet or base.
PART
LIST
T
-
3030T,
T
-
3042T,
T
-
3048T,
T
-
3636T,
T
-
4242T
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have the following parts:
NO
Description
Qty
Sketch
A Table top 1
PART LIST
T
-
30S,
T
-
36S,
T
-
42S
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have the following parts:
NO
Description
Qty
Sketch
B Shaker legs 4
OR
PART LIST
T
-
330T, T
-
336T, T
-
342T
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have the following parts:
NO DeDescriptionscriti Qty Qty Sketch Sketch
BB
Sha
Turned legs er
legs
4
44

ITEM: T
-
3030T, T
-
30
42T, T
-
3048T, T
-
3636T, T
-
4242T AND
T-330T, T-336T, T-342T OR T-30S, T-36S, T-42S
REVISED SEP 24, 2014
Printed in Vietnam
- 3 – THIS ITEM IS PACKED IN 2 CARTONS
RT LIST T-3336T, T-3
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have all of the following hardware:
NO
Description
Qt
y
Sketch
NO
Description
Q
ty
Sketch
1 Hexagon nut
(M8x13mm) 8
3
Lock washer
(8.5x13mm)
8
2
Flat washer
( 8.5x19mm)
8 4 Wrench
(13mm) 1
NOTE: HARDWARE IS PACKED IN CARTON OF LEGS T-330T, T-336T, T-342T OR T-30S, T-36S, T-42T
STEP 1
Attach legs (B) to the top (A) with washers (2), and (3) and nuts (1) as shown below. Tighten with the
wrench (4).