International Concepts Whitewood SOLID TOP SHAKE T-3636T User manual

ITEM : T-3636T; T-4242T
Printed in Vietnam
- 1 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please
take the time to read and follow the assembly instructions carefully.
ASSEMBLY INSTRUCTIONS
Description
Item No.
: SOLID TOP SHAKER TABLE
: T-3636T; T-4242T

ITEM : T-3636T; T-4242T
Printed in Vietnam
- 2 -
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please
separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call Toll Free: 1-888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Table Top
(SEPARATELY)
1
36” TABLE TOP
42” TABLE TOP
B
Table Leg
4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Hexagon nut
( M8X7mm)
8
2
Lock washer
( 8/13mm)
8
3
Flat washer
( 8/19mm)
8
4
Wrench
(13mm)
1
STEP 1
Place legs (B) in position as shown below and attach using washers (2), (3), and nuts (1) with the
wrench (4).

ITEM : T-3636T; T-4242T
Printed in Vietnam
- 3 -
B
A
4
1
2
3
B
B
B
B
A
1
2
3