Invacare 1108705 Assembly instructions

Part No. 1123847 1MPR Tray Assembly Kit
MPR Tray Assembly Kit - Model 6905A
Assembly,InstallationandOperatingInstructions
Kit No. 1108705, 1069956
SAVE THESE INSTRUCTIONS
NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact
Carrier/Dealer for further instruction.
SAFETY SUMMARY
To ensure the safe installation, operation and use of the MPR Tray Assembly
Kit, these instructions MUST be followed:
GENERAL WARNING
DONOTinstallorusethisequipmentwithoutfirstreadingandunderstanding
theseinstructions.IfyouareunabletounderstandtheWarnings,Cautionsor
Instructions,contactahealthcareprofessional,dealerortechnicalpersonnelbefore
attemptingtoinstallthisequipment-otherwiseinjuryordamagemayoccur.
INSTALLATION WARNING
AfterANYadjustments,repairorserviceandbeforeuse,makesureallattaching
hardwareistightenedsecurely-otherwiseinjuryordamagemayoccur.
MPR Tray Assembly Kit (Part No. 1108705) contains the following items:
DESCRIPTION QUANTITY
Tray* 1
Pivot Arm 1
Support Arm 1
Tray Tab 4
Flange Screw 8
Dome Plug 2
*Tray (Part No. 1069956) can also be ordered separately.
REPLACING THE TRAY - MODEL 6905A (FIGURE 1)
1. Remove tray from recliner. Refer to STORING/REMOVING THE TRAY in the
Owner’s Manual, part number 54000M107.
2. Position tray assembly on the floor as shown in FIGURE 1.
3. Remove the four (4) flange screws and two (2) tray tabs that secure the support arm
to the tray.
4. Remove the four (4) flange screws and two (2) tray tabs that secure the pivot arm to
the tray.
5. Remove existing tray.
NOTE: Retain ALL mounting hardware and arms if only installing new Tray, part number 1069956.
For more information regarding Invacare products, parts, and services,
please visit: www.invacare.com
All manuals and user guides at all-guides.com
all-guides.com

Invacare Corporation www.invacare.com
USA Canada
One Invacare Way 570 Matheson Blvd E Unit 8 Invacare is a registered trademark of
Elyria, Ohio USA Mississauga Ontario Invacare Corporation.
44036-2125 L4Z4G4 Canada Yes, you can. is a trademark of Invacare
800-333-6900 800-668-5324 Corporation.
© 2004 Invacare Corporation
Part No. 1123847 Rev A-3/04
6. Secure the pivot arm and two (2) tray tabs to the tray with four (4) flange screws.
Securely tighten flange screws. Repeat for support arm.
7. Insert pivot arm and support arm into recliner frame underneath armrests.
FIGURE 1 - REPLACING THE TRAY - MODEL 6905A
Support Arm
Tray
Tray Tabs
Flange Screws
Pivot Arm
Tray Tabs
Flange Screws
All manuals and user guides at all-guides.com