Invacare BAR750 User manual

Invacare® Bariatric Bed
Model BAR750
User Manual
This manual MUST be given to the user of the product. BEFORE using this product, this manual MUST be read
and saved for future reference.
©2018 Invacare Corporation
All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are
identified by ™and ®. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted.
Making Life’s Experiences Possible is a registered trademark in the U.S.A.

BAR750
1
Contents
Parts Locator................................................................................................................ 2
Safety Notes................................................................................................................. 3
Signal Words .....................................................................................................................................................................3
General Guidelines..........................................................................................................................................................4
Disposal ...........................................................................................................................................................................11
Intended Use.............................................................................................................. 12
Unpacking and Setup Instructions ............................................................................... 13
Receiving..........................................................................................................................................................................13
Unpacking .......................................................................................................................................................................13
Inspecting........................................................................................................................................................................14
Assembling the Bed......................................................................................................................................................14
Assembly Instructions ................................................................................................ 20
Storing the Bed ..............................................................................................................................................................21
Operation .................................................................................................................. 22
Operating the Bariatric Bed ........................................................................................................................................22
Steering the Bed ............................................................................................................................................................24
Adjusting the Bed..........................................................................................................................................................24
Maintenance .............................................................................................................. 28
Service Life ......................................................................................................................................................................29
Wear and Tear ................................................................................................................................................................29
Cleaning the Bed ...........................................................................................................................................................29
Maintenance and Cleaning Checklist ......................................................................................................................30
Troubleshooting......................................................................................................... 32
Troubleshooting: Electrical ........................................................................................................................................32
Troubleshooting: Mechanical ....................................................................................................................................32
Specifications............................................................................................................. 33
Warranty .................................................................................................................... 34
Limited Warranty ...........................................................................................................................................................34
THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

BAR750
2
Parts Locator
Parts Locations
Label Locations
The same labels are located on the opposite side of the bed.

BAR750
3
Safety Notes
Gives useful tips, recommendations and information for efficient, trouble-free use.
For household/residential or public occupancy use per UL 962.
Bed is NOT for hospital use and was not designed to meet hospital standards.
Only use bed indoors.
Signal Words
Signal words are used in this manual and apply to hazards or unsafe practices which could
result in personal injury or property damage. See the information below for definitions of
the signal words.
DANGER!
–Danger indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING!
–Warning indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION!
–Caution indicates a potentially hazardous situation which, if not
avoided, may result in property damage or minor injury or both.
WARNING!
Risk of Injury or Damage
The weight limit of the occupant of the bed CANNOT exceed 675
pounds. To avoid injury and/or damage from bed collapse:
– The TOTAL weight limit of the bed (including accessories,
mattress, occupant and any other objects positioned on the
bed) cannot exceed 750 pounds (Safe Working Load).
WARNING!
Risk of Injury or Damage
Patients that weigh less than 350 pounds have an increased risk of
entrapment. To avoid injury or damage from entrapment:
– Patients that weigh less than 350 pounds should not use the
BAR750 Bariatric Bed.

BAR750
4
General Guidelines
DANGER!
Risk of Death, Injury or Damage
Improper use of this product may cause injury or damage.
– If you are unable to understand the warnings, cautions or
instructions, contact a health care professional, dealer or
technical personnel before attempting to use this equipment.
– Do not use this product or any available optional equipment
without first completely reading and understanding these
instructions and any additional instructional material such as
user manuals, service manuals or instruction sheets supplied
with this product or optional equipment.
Continued use of the product with damaged parts could lead to the
product malfunctioning, causing injury to the user and/or caregiver.
– Check ALL product components and carton for damage, and
test components before use. DO NOT use product if
components are damaged or if product is not working
properly. Contact a qualified technician or Invacare for repair.
To avoid injury or product damage:
– Set-up and Assembly instructions MUST be performed by
qualified technicians only. “Qualified Technician Only” sections
are marked accordingly.
DANGER!
Risk of Death, Injury or Damage
Lighted cigarettes can cause a fire or other related hazards resulting
in death, injury, or damage.
– Do not smoke while using this product.
– Do not allow others to smoke near this product.
DANGER!
Risk of Death, Injury or Damage
Bed accessories designed by other manufacturers have NOT been
tested by Invacare. Use of non-Invacare bed accessories may result in
injury or death.
– Use ONLY Invacare rails, mattresses, bed extenders and other
accessories with Invacare bed products.
DANGER!
Risk of Injury or Death
To reduce the risk of electrical shock:
– Always unplug the product from the electrical outlet before
cleaning.

BAR750
5
DANGER!
Risk of Death, Injury or Damage
To reduce the risk of shock:
– Unplug from the outlet before servicing.
– Close supervision is necessary when the product is used by, or
near children and/or disabled persons.
– Use this product only for its intended use as described in these
instructions. DO NOT use attachments not recommended by
the manufacturer.
– If liquid is spilled in or around the product, unplug before
cleaning. Clean up the spill and allow the product or the area
around the product to dry thoroughly before using the controls
again.
DANGER!
Risk of Death, Injury or Damage
To avoid shock, product damage and personal injury:
– DO NOT use outdoors.
– Connect this product to a properly grounded outlet only.
– DO NOT place video equipment such as televisions or
computer monitors on product.
Operating Information
DANGER!
Risk of Death, Injury or Damage
To avoid injury or damage when operating product:
– After any adjustments, repair or service and before use, make
sure all attaching hardware is tightened securely.
– Close supervision is necessary when the product is used near
children or pets OR when this product is operated by or near
people with physical/mental disabilities. Physically challenged
individuals who cannot prevent themselves from
rolling/climbing out of the product may require alternative
safe means of restraint.
– The product is not designed to be used as a patient transport.
When transporting a patient, use an approved patient
transport. Otherwise, injury or damage may result.

BAR750
6
WARNING!
Risk of Injury or Damage
To avoid injury or damage when operating/moving bed:
– ALWAYS ensure that the individual utilizing the bed is
positioned properly within the confines of the bed. DO NOT let
any extremities protrude over the side or between the bed rails
when performing these functions.
– Be aware of potential pinch points when operating bed rails or
other accessories.
– Make sure head and foot springs/sections are connected
securely to the bed ends before use.
– The bed is equipped with locking casters. Before using the
bed, test the wheel locks to ensure casters lock correctly.
When transferring into or out of the bed, ALWAYS lock the
casters. Even with casters properly locked, some flooring
surfaces (such as tile or wood,) will allow the bed to move
under some conditions. Using the bed on these types of
surfaces MUST be evaluated by the care provider. DO NOT
transfer occupant if bed is not stable. Otherwise, injury and/or
damage may occur.
– DO NOT move product with locking casters in LOCKED
position.
DANGER!
Risk of Death, Injury or Damage
To avoid pinching, crush and collapse hazards from bed deck contact
with objects under the bed:
– DO NOT place any objects or let any individual underneath the
bed or in between the raised bed frame components at any
time.
To avoid choking from small detachable parts contained underneath
the bed:
– Closely supervise children, pets, or people with
physical/mental disabilities.
Refer to the Bed Rail Entrapment Risk Notification Guide at www.invacare.com for additional safety
information.

BAR750
7
DANGER!
Risk of Death, Injury or Damage
Patient entrapment from the use of bed side rails may cause injury or
death. To avoid patient entrapment:
– The Invacare mattress MUST fit firmly against the bed frame
AND bed side rails to prevent patient entrapment. Follow the
manufacturer’s instructions. Monitor patient frequently. Read
and understand the user manual prior to using the Invacare
bed and bed rails. User manuals are available at
www.invacare.com or your dealer.
– After any adjustments, repair or service and before use, make
sure all attaching hardware is tightened securely.
– Mattress platform, bed ends, pendant and accessories are
applied parts
DANGER!
Risk of Death, Injury or Damage
Conditions such as restlessness, mental deterioration and dementia or
seizure disorders (uncontrolled body movement), sleeping problems,
and incontinence can significantly impact a patient's risk of
entrapment.
Pediatric patients or patients with small body size may also have an
increased risk of entrapment.
– Monitor patients with these conditions frequently.
– Place the mattress deck in the flat position when left
unattended.
WARNING!
Risk of Injury or Adverse Health Consequences
Fall hazard exists due to bed height.
– Always leave bed in lowest height when unattended.
Replacement Parts/Accessories
DANGER!
Risk of Death, Injury or Damage
To avoid fire hazards and tubing entanglement:
– Use masked or nasal type oxygen administering equipment
only in conjunction with the manual/electric bed. The use of
any other type of oxygen administering equipment can result
in a fire hazard.
– When using nasal or masked type oxygen administering
equipment, the oxygen or air tubing MUST be routed and
secured properly to ensure that the tubing does not become
entangled and/or severed during normal operation of
manual/electric bed.
– Do not use this bed in Active Treatment “Ether Environments.”

BAR750
8
DANGER!
Risk of Death, Injury or Damage
To avoid fire hazards, injury or damage:
– DO NOT use product with flammable gases. Explosion may
occur.
WARNING!
Risk of Injury or Damage
To avoid injury or damage from misuse or entrapment:
– Read and understand the instructions or labels provided with
mattress.
– If you do not understand the instructions or if instructions are
missing, contact the mattress manufacturer.
DANGER!
Risk of Death, Injury or Damage
To avoid entrapment, product damage and/or personal injury:
– Invacare recommends that the mattress be centered on the
bed frame. Otherwise, individuals may become trapped
between the bed rail and the bed frame.
– ALWAYS test to make sure that the side rails are properly and
securely in place before using. Otherwise, injury or damage
may occur.
DANGER!
Risk of Injury or Adverse Health Consequences
Fall hazards exist due to the use of non-Invacare mattresses. Non-
Invacare mattresses are potentially incompatible with Invacare beds.
– To avoid injury, ensure that only Invacare mattresses are used
with Invacare beds at all times.
DANGER!
Risk of Death or Injury
An increased risk of patient entrapment may occur over time due to
mattress compression.
– Periodically monitor gaps between the bed, mattress, and/or
bed rail. Where gaps occur, patient entrapment is possible and
the mattress should be replaced.

BAR750
9
DANGER!
Risk of Death, Injury or Damage
To avoid entrapment, product damage and/or personal injury:
– When used with a manual/electric bed, the bed rails DO NOT fall
under any weight limitations. Bed rails can be deformed or broken
if excessive side pressure is exerted on the bed rails. These bed
rails are used for the purpose of preventing an individual from
inadvertently rolling out of bed. The bed rails are not intended
nor may be used for restraint purposes. If an individual is capable
of injuring himself/herself, a physician or a health care
professional should be consulted for alternative means of safe
restraint.
– After raising/lowering the head/foot end of the electric bed, check
the distance between the bottom of the bed rail and the mattress.
If there is excessive distance between the bottom of the bed rail
and the mattress in which individuals may become entangled,
adjust the height of the bed rail (if applicable), or provide
alternative means of patient protection.
– DO NOT use the side rails as push handles for moving the electric
bed.
– Replacement mattresses and bed side rails with dimensions
different from the original equipment supplied or specified by the
bed frame manufacturer are not interchangeable. Variations in
bed side rail design, width and thickness or firmness of the
mattress could cause/contribute to entrapment.
DANGER!
Risk of Death, Injury or Damage
To avoid injury or damage from misuse or entrapment:
– Proper patient assessment and monitoring, and proper
maintenance and use of equipment is required to reduce the risk
of entrapment. Variations in bed rail dimensions and mattress
thickness, size or density could increase the risk of entrapment.
Visit the FDA website at http://www.fda.gov to learn about the
risks of entrapment. Review “A Guide to Bed Safety”, published by
the Hospital Bed Safety Workgroup located at www.invacare.com.
Use the link located under each bed rail product entry to access
this bed safety guide.
– Refer to the user manuals for beds and rails for additional product
and safety information.
– Patient entrapment from the use of bed side rails may cause injury
or death. The Invacare mattress MUST fit firmly against the bed
frame AND bed side rails to prevent patient entrapment. Follow
the manufacturer’s instructions. Monitor patient frequently. Read
and understand the User Manual prior to using this equipment.
Invacare manuals are available at www.invacare.com or your
dealer.
– An increased risk of patient entrapment may occur over time due
to mattress compression. Periodically monitor gaps between the
bed, mattress, and/or bed rail. Where gaps occur, patient
entrapment is possible and the mattress should be replaced.

BAR750
10
Electrical
WARNING!
Risk of Death, Injury or Damage
Shock hazards and risk of fire exist due to use of improper extension
cord and use of three prong adapters.
– To avoid injury or product damage, when using an extension
cord, use only a UL approved three prong extension cord
having at least 16 AWG (American Wire Gauge) wire and the
same or higher electrical rating as the product being
connected.
– DO NOT use three prong to two prong adapters.
WARNING!
Risk of Injury or Damage
To avoid product damage and personal injury:
– Disconnect pendant when not in use and store out of reach of
children.
Grounding Information
WARNING!
Risk of Shock Injury
Electric beds are equipped with three prong (grounding) plugs for
protection against possible shock hazards.
Where a two prong wall receptacle is encountered, it is the personal
responsibility and obligation of the
customer to contact a qualified electrician and have the two prong
receptacle replaced with a properly grounded three prong wall
receptacle in accordance with the National Electrical Code.
– If you must use an extension cord, use only a three prong
extension cord having the same or higher electrical rating as
the product being connected. DO NOT, under any
circumstances, cut or remove the round grounding prong from
any plug used with or for Invacare products.
– Junction box MUST be securely connected to the bed with
metal screws and the spacer provided for proper grounding.
Otherwise, electrical shock may occur.
WARNING!
Risk of Injury or Damage
To avoid injury or damage from improper grounding or using
damaged parts:
– DO NOT operate the product if the cord or outlet is damaged.
– DO NOT operate the product if any motor has malfunctioned
or is damaged in any manner.

BAR750
11
Radio Frequency Interference
Use of portable and mobile RF communications equipment can affect medical
electrical equipment.
WARNING!
Risk of Product Damage
Electronic equipment may be influenced by Radio Frequency Interference
(RFI).
– Caution should be exercised with regard to the use of portable
communications equipment in the area around such equipment.
– If RFI causes erratic behavior, unplug the product immediately.
Leave unplugged while transmission is in progress.
WARNING!
Risk of Product Damage
The use of accessories, transducers, cords and cables other than those
specified by the manufacturer, may result in increased emissions or
decreased immunity of this bed.
– This product should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, this
product should be observed to verify normal operation in the
configuration in which it will be used.
Weight Limitations
Danger!
Risk of Death, Injury or Damage
To avoid bed collapse and resulting injury or damage:
– The weight limit of the occupant of the bed CANNOT exceed 675
pounds. The TOTAL weight limit of the bed (including accessories,
mattress, occupant and any other objects positioned on the bed)
cannot exceed 750 pounds (Safe Working Load).
– NEVER permit more than one person on the bed at any time.
– Body weight should be evenly distributed over the surface of the
bed. DO NOT lay, sit or lean in such a way that your entire body
weight is placed only on raised head or foot sections of the bed.
This includes when repositioning or transferring in or out of bed.
Disposal
Follow local governing ordinances and recycling plans regarding disposal of the product or components
normally used in operation. The product does not generate waste or residue in operation. Any accessories
not part of the product MUST be handled in accordance with the individual product marking for disposal.
This product has been supplied from an environmentally aware manufacturer that complies with the Waste
Electrical and Electronic Equipment (WEEE) Directive 2012/19/EC.
This product may contain substances that could be harmful to the environment if disposed of in places
(landfills) that are not appropriate according to legislation.
Please be environmentally responsible and recycle this product through your recycling facility at its end of
life.
Never disassemble your Bariatric bed. If problems are found, contact INVACARE customer service at
1-800-333-6900 or your local INVACARE provider.

BAR750
12
Intended Use
Intended Use
To provide mattress support system for articulation of the head and foot sections to provide
different positions for the patient.
Indications for Use
Indicated to provide mattress system for use in home care and long term facilities.
This bed is designed for bariatric patients. The bed is ideal for short term use in clinics, hospitals,
and rehab centers; and long term use in nursing care centers. It is intended for all age groups
with varying medical and physical conditions.
3-FUNCTIONS
1) Raise and lower head 2) Lift and lower leg and foot section 3) Elevate bed height
Power functions are powered by 24-volt DC electric actuators.
Electrical Power: 120 volt AC power transformer converts system to 24-volt DC. Electrical
actuators, handset, transformer, and battery backup meet CE, UL, ETL & CSA listing.
Power plug: Three-prong hospital type plug, grounding meets NFPA & IEC standards.
Construction: Constructed entirely of steel, solid frame, powder coat painted.
Frame: Expandable frame allows the bed to accommodate 39 inch, 42 inch, and 48 inch wide
support surfaces. The bed surface adjusts to allow it to fit through a 42-inch door opening.
Side Rails: Head end, three position, drop down style.
Casters: Heavy Duty Five (5) inch casters. Two individual locking-type (foot end) and two steer
type (head end).
Accessory sockets: One IV socket and one square socket on each corner of bed.

BAR750
13
Unpacking and Setup Instructions
Receiving
WARNING!
Risk of Injury or Damage
“Qualified Technician Only” sections are marked accordingly.
– Set-up and Assembly instructions MUST be performed by
qualified technicians only.
1. Count cartons before signing shipping papers.
2. Designate someone at the facility to receive and inspect all
merchandise. Use the master order acknowledgment to check
off items as they are received.
3. Compare the number of cartons shipped with the number of
cartons actually received and note such on the consignee copy
of the freight bill. Make sure to have the truck driver sign the
copy acknowledging the count.
4. If shortage occurs, IMMEDIATELY contact Invacare Customer
Service department at [phone].
Unpacking
DANGER!
Risk of Injury or Damage
Continued use of the product with damaged parts could lead to the
bed malfunctioning, causing injury to the user and/or caregiver.
– Check ALL product components and carton for damage, and
test components before use. In case of damage or if the
product is not working properly, contact a qualified technician
or Invacare for repair.
WARNING!
Risk of Injury or Damage
To avoid damage or personal injury:
– DO NOT plug the power cord into a power source until
assembly is complete.
– DO NOT attempt to operate product controls prior to
completion of assembly.
1. Remove any loose packing from the cartons.
2. Carefully remove all components from the cartons.

BAR750
14
Inspecting
DANGER!
Risk of Injury or Damage
To avoid injury or damage, inspect the following and contact a
qualified technician or Invacare if any of the following issues are
present:
– Pendant covering is cracked or damaged.
– Power cord or plug have cuts or damage.
– Motor cables have cuts or damage.
– Junction box or connectors are damaged.
DANGER!
Risk of Injury or Damage
To avoid injury or damage:
– Ensure that the connectors are plugged into the junction box
and fit properly.
Assembling the Bed
DANGER!
Risk of Death, Injury or Damage
To avoid serious injury or product damage from tripping,
entanglement and/or pinched, or severed cords:
– Ensure that all cord(s) are routed and secured properly.
– Keep all moving parts, including the main frame, mattress
deck, and all drive shafts, free of obstruction (i.e.
blankets/sheets, tubing, wiring, cords, etc.) during operation
of the product.
– Do not roll the product over the power or pendant cord.
1. Remove packing carton from bed.
Remove stretch wrap from around bed.
Remove all packaging bands. Carefully
remove the box containing the side rails
and head/foot boards.
(see photo 1)
Photo 1

BAR750
15
2. Grasp cross bar on head-end section of
bed (section packed on top).
(see photo 2)
Photo 2
3. Pull section and flip section over until
wheels touch floor as shown.
(see photo 3)
Photo 3
4. Grasp back-rest of head-end section and
rotate until that section rests on frame
portion already on floor.
(see photo 4)
Photo 4

BAR750
16
5. Locate 2 Clevis pins (1 each side of bed)
on backrest of head-end section which
connect shipping brace to bed.
Remove rue ring from clevis pin.
Remove clevis pin from bed and packing
brace. Repeat for other side (2 total).
(see photo 5)
Photo 5
6. The head-end section of the bed can
now be pulled away from the shipping
bracket as shown.
(see photo 6)
Photo 6
7. Remove rue ring and clevis pins (both
sides) securing shipping bracket to foot-
end section (bed section still on pallet) of
bed.
(see photo 7)
Save the clevis pin and rue ring to
assemble bed together (step #11).
Photo 7

BAR750
17
8. Remove shipping brace from foot-end
bed section. Lift up on frame before
pulling shipping brace out.
(see photo 8)
Photo 8
9. Slide head-end section into foot-end
section until side clevis pin holes line up.
(see photo 9)
Photo 9
10. Clevis pin holes located in side of frame
lined up.
(see photo 10)
Photo 10

BAR750
18
11. Insert clevis pin into each side frame
hole. Place pin into frame from outside.
Secure clevis pin using rue ring on
inside of frame.
(see photo 11)
Photo 11
12. Lift back rest and attach the hi/lo
actuator to the bed leg with clevis pin
and hairpin clip.
(see photo 12)
Photo 12
13. Raise bed up using hand pendant
enough for some working room between
the pallet and the bed.
(see photo 13)
Photo 13

BAR750
19
14. Attach the back rest actuator to the
back rest with clevis pin and hairpin
clip.
(see photo 14)
Photo 14
15. Grasp the bed from the length
extensions and lift the bed up out of the
cardboard blocks. Walk the bed off of
the pallet and gently set it down on the
floor.
(see photo 15)
Photo 15
DECREASING BED HEIGHT FOR TRANSPORT
Always lower the bed to its lowest position which is against the “stops” before transporting the bed.
STOP