InWin Explorer User manual

User Manual

EXPLORER Assemble Guide Video
EXPLORER Installation Guide Video
EXPLORER Product Video
Product Video InformationProduct Video Information

Product StoryProduct Story
Build Your PC from the Outside In
The EXPLORER gaming chassis offers you the
chance to build your own PC case! Assemble
the 10-piece modular structure of EXPLORER to
complete the mini tower. Nice DIY project for
yourself or build the chassis with friends or family!

Model EXPLORER
Model Number IW-CS- EXPLORER-JWHI,
IW-CS- EXPLORER-BWHI
Colors Justice White, Bone White
Case Type Mini-ITX Tower
Materials Tempered Glass, SECC, ABS
M/B Compatibility Mini-ITX
Expansion Slots 3 x Vertical PCI-E
Maximum Compatibility VGA Card Length: 330mm
CPU Heatsink Height: 160mm
I/O Ports
1 x USB 3.1 Gen 2 Type-C
2 x USB 3.0
HD Audio
Internal Drive Bays 2 x 2.5" / 1 x 3.5"
Thermal Solution
Compatibility
Air Cooling Fans:
Top: 2 x 120 / 2 x 140mm
Rear: 1 x 120 / 140mm
(3 InWin AL120 Fans Included)
Water Cooling Radiator:
Top: 1 x 240mm
* Number of fans pre-installed may vary based on di󶇯erent regions.
Power Supply Compatibility PSII: ATX12V
- Length up to 160mm
Product Dimensions
(L x W x H)
390 x 272 x 310mm
15.3 x 10.7 x 12.2”
Package Dimensions
(L x W x H)
405 x 300 x 225 mm
15.9 x 11.8 x 8.8”
Net Weight 3.75 kg / 8.26 lbs.
Gross Weight 5 kg / 11 lbs.
Speci󶇰cationsSpeci󶇰cations
InWin EXPLORER Chassis
* InWin's products comply with RoHS regulations.
* Speci󶇰cations may vary based on di󶇯erent regions.

Speci󶇰cationsSpeci󶇰cations
InWin Luna AL120 Fans
* Specications may vary based on different regions.
* Our products comply with RoHS regulations.
Model Luna AL120
Quantity Included Single Pack Triple Pack
Model Number IW-FN-AL120-1PK IW-FN-AL120-3PK
Colors Black
Fan Size 120 x 120 x 25 mm
Materials PC, PBT
Rated Voltage DC 12V
Rated Power 3.96W
Rated Current 0.33A
ADD RGB Rated Voltage DC 5V
ADD RGB Rated Power 1.5W
ADD RGB Rated Current 0.3A
Speed Mode PWM 400-1800 +/-10% RPM
Air Flow 82.96 CFM
Air Pressure 2.31 mm / H2O
LED Addressable RGB
Connector (Fan to Fan) Non-Modular Cables
Connector to M/B 4-Pin (PWM, 12V), 3-Pin (ARGB, 5V)
Noise Level 25 dB(A) (Normal)
Bearing Type Long Lifespan Sleeve Bearing
Net Weight 133 g 399 g
Gross Weight 169 g 484 g
Package Dimensions
(L x W x H)
185 x 125 x 30mm
7.3 x 4.9 x 1.2”
185 x 125 x 82mm
7.3 x 4.9 x 3.2”
Warranty 2 Years

Package ContentPackage Content

Fans Package ContentsFans Package Contents
Luna AL120 Fans
Fan Screws
ARGB One-Click Controller
x 12
x 1
x 3

Accessories BagAccessories Bag
S-2 Screws
S-2 Rubber Stands
S-1 Hexagon Head Screws
3.5” HDD Screws
Power Supply Holder
Power Cord
Cable Ties
2.5” HDD Screws
S-3 Power Cord Screws
x 30
x 4
x 6
x 1
x 1
x 5
x 4
x 10
x 2

Case StructureCase Structure
1
4
6
2
1. I/O Panel
2. Tempered Glass Side Panels
3. Anti-Dust Filter
4. Shock-Proof Stand
5. Swappable SECC Front Panel
6. Swappable ABS Front Panel
5
3

1
2
3
4
5
1. 2.5”/3.5” Drive Mounting Area
2. Power Supply Mounting Area
3. Top Fans/Radiator Mounting Area
4. Rear Fan Mounting Area
5. Motherboard Mounting Area
6. CPU Cooler Installation Cut-Out Hole
7. PCI-E Expansion Slots
67
Case StructureCase Structure

Installation GuideInstallation Guide
* Please follow the related chapters to assemble.
* Please only use original provided accessories to avoid damage
to the product.
1.
Opening the Chassis
2.
Motherboard Installation
Parts Required: Hexagon
Head Screws

3.
Expansion Card Installation
4.
Connection Cables
Parts Required: Hexagon
Head Screws
I/O Wires
HD Audio Header
Black(P_LED) 1
Black(P_LED) 3
Black(P_SW) 5
Black(P_SW) 7
Key 9
2 Black (HDD)
4 Black (HDD)
6 NC
8 NC
10 NC

Parts Required: Included Luna AL120 Fans
Fan Installation Instructions:
https://youtu.be/_S_LLcqe0KI
USB 3.0 Header
USB 3.1 Type-C Header
5.
Fan/Liquid Cooling Radiator Installation

6.
2.5”/ 3.5” Drive Bays Installation
7.
Power Supply Installation
7.1 Uninstall the Power Supply Holder by unscrewing the two screws.
7.2 Screw your power supply to the bracket, connect the power cord
to your power supply and install the bracket back to the chassis.
Parts Required:
2.5”/ 3.5”
HDD Screws
You can choose to either install 2 x 2.5” SSDs or 1 x 3.5” HDD on
the selected area.
Parts Required: Hexagon
Head Screws

8.
Installation Complete Parts Required:
Cable Ties

Notices and WarrantyNotices and Warranty
■Notices
1. Please follow the user manual for installation guidelines.
2. When installing the computer components, please
use antistatic precautions to prevent ESD (electrostatic
discharge) damage. Failure to take the necessary
precautions may result in injury to the installer and/or
damage to the machine. Incorrect installation may
burnout the motherboard and other system components.
3. To avoid any damages, please do not use this product for
any other purpose than its intended use.
4. Any modi󶇰cations may damage the product.
5. Please remove all internal devices before shipping or
moving. (Including power supply, hard drives,
motherboard, CPU, etc.)
6. When storing the case, please keep this product away
from high temperatures. Keep away from machines such
as heaters that might cause high temperatures.
■ Warranty
* For more detailed warranty information, please visit the
InWin retail website at www.in-win.com.
* The actual product is subject to change without prior
notice. In Win Development Inc. reserves the right to make
󶇰nal modi󶇰cations.

Copyright © 2021 In Win Development Inc. All Rights Reserved.