InWin SATORN ASN140 User manual

User Manual

Product Video Information
Saturn Series Product Video
Saturn Series Installation Video

Product Story
Inspired by the vibrant coloration found
in some regions of outer space, the ASN140
Saturn ARGB case fans continue InWin’s
breakthrough technological case fan
development. InWin is the first company
to develop modular case fans. By simply
connecting the fans together, this not only
makes cable management a breeze, but they
are daisy-chainable too. Saturn o󽗈ers newer
features than even our previous Polaris fans.
Improvements to the provided controller
enhances the overall building experience.

Package Contents
Triple Pack
1. Saturn ASN140 Fans x 3
2. ARGB One-Click Controller PLUS x 1
3. Screws x 12
4. 6-6 Pin Fan Cables 100mm x 2
5. 6-6 Pin Fan Cable 1000mm x 1
6. ARGB Cable x 1
7. PWM Cable x 1
8. Main Cable x 1
Single Pack
1. Saturn ASN140 Fan x 1
2. Screws x 4
3. 6-6 Pin Fan Cables 100mm x 1
4. 6-6 Pin Fan Cable 1000mm x 1

Product Name Saturn ASN140
Quantity Included Single Pack Triple Pack
Model Number IW-FN-ASN140-1PK IW-FN-ASN140-3PK
Colors Black/White
Fan Size 140 x 140 x 25mm
Materials PC, PBT
Rated Voltage 12V
Rated Power 3.24W
Rated Current 0.27A
ADD RGB Rated Voltage 5V
ADD RGB Rated Power 1.5W
ADD RGB Rated Current 0.30A (max.)
Speed Mode PWM 500~1400 RPM
Air Flow 93.97 CFM
Air Pressure 1.73mm/ H2O
LED Addressable RGB
Connector (Fan to Fan) 6-pin Modular
Connector to M/B 4 Pin (PWM, 12V), 3 Pin (ARGB, 5V)
Noise Level 35 dB(A)
Bearing Type Long Lifespan Sleeve Bearing
Gross Weight 200g 583g
Package Dimensions
(L x W x H) 147 x 205 x 28mm 144 x 216 x 90mm
Warranty 2 Years
Speci󽗉cations
140mm
140mm
25mm
* Specications may vary based on different regions.
* InWin products comply with RoHS regulations.

ARGB One-Click
Controller PLUS Information
1. M/B ARGB Port
2. M/B PWM Port
3. Main Cable Port
4. ARGB Port
5. PC 2-Pin Reset Port
6. Special Speci󽗉cation Port
7. Button
3
(Note: Only in Triple-Pack)
2
1
7
5
4
6

PWM Cable 600mm
ARGB Cable 600mm
Main Cable 800mm
6-6 Pin
Fan Cable
100mm
6-6 Pin
Fan Cable
Cable Information
a
b
c
d
e

Installation
1. Please make sure the power is o󽗈.
(Note: Please connect the cable according to the cable information.)
2.
Connect C to the 1st fan and the controller.
Connecting the fans with each other by using
D or . (Chain a max of 6 ASN fans)
Install the fans in your PC case and mount
them in the designated areas.
Connect the A and B to the controller and M/B.
3.
4.
5. b
b
a
de
c
a

Installation
6. If you wish to adjust the ARGB Lighting e󽗈ect
via the PC case reset button, please connect
the PC case’s 2-pin reset button cable to
the controller.
To connect more ARGB peripherals such as
LED Strip, please connect the ARGB cable of
the peripheral to the controller “ARGB Out”
jack.
7.
Note: Do not connect “ARGB In” peripherals to the controller
“ARGB Out” jack.

Installation
Connect the SATA Power Connector to the
PSU’s SATA Connector.
Complete installation.
9.
10.
Use the magnetic strip on the back of the
controller to place the controller to the metal
parts in the PC case.
8.

How to use the ARGB
One-Click Controller PLUS
(Note: The Controller only comes with the 3-Pack.)
Switch on your PC after completing
installation.
Mode Switching:
M/B Mode: The controller will automatically connect
to “M/B Mode” if your M/B supports ARGB lighting
e󽗈ects. Now you can control your ARGB lighting e󽗈ect
via M/B software.
Controller Mode: If your M/B does not support a
3-pin, 5V ARGB header, the controller will switch to
“Controller Mode”, and you will able to switch the
lighting e󽗈ect by clicking the button on the controller
or the PC reset button if you had connected the 2-Pin
reset button cable to the controller.
Tap the button to change the lighting modes.
1.
2.
1Rainbow 9Diagonal Transition
2LED-Red 10 Rotating LED Trio
3LED-Green 11 Full Circle
4LED-Blue 12 Flow-Red
5LED-Purple 13 Flow-Green
6LED-White 14 Flow-Blue
7Light at the end of
the Tunnel 15 Turn Off the Light
8Two-Tone Ring
*InWin reserves the right to change the lighting
modes.

Note: Tap the button (Controller button/2-
Pin Reset button) once under "M/B Mode" to
switch to "Controller Mode" or you can hold
the button for 3 seconds to switch back to
“M/B Mode” under "Controller Mode".
*For more installation instructions, please scan
the QR Code below or watch the video in the
website link: https://youtu.be/lloT2GTKWds

Troubleshooting
If your fan does not operate properly, please
follow the instructions below:
1. Please check your system’s power.
2. Please make sure all the connectors are
connected properly.
Important Notes
1. Please install the fans by following our
instructions.
2. When storing the fans, please keep this
product away from high temperatures.
Keep it away from machines such as heaters
that might cause high temperatures.
3. Please do not put anything in the impeller.
4. Please do not modify the wires or the
connectors provided by InWin.
5. Please do not touch the fan blades when the
fan is in operation.
6. Please only use your fan in a computer case.
7. Please keep this product away from any liquids.

Copyright © 2020 In Win Development Inc. All Rights Reserved.