InWin SR Series User manual

User Manual
Version 1.0
User Manual
All-In-One
Twin Turbines Liquid CPU Cooler
Version 1.0

The SR series possesses a high waterow pump,
and the patented twin-turbine function runs
parallel with one another and functions
simultaneously to push both currents toward the
copper cold plate to signicantly reduce the
temperature and keep hardware cool. The pump
illuminates a white LED logo under normal
circumstances. If it detects an unusual current or
excessive heat, the LEDs will ash red and blue
lights to prevent damaging components.
The SR series come with AJF120 fans to provide
the best operational performance, while
reducing noise pollution. The AJF120 case fans
can also sync with addressable motherboards.
The tubing is sleeved with braided nylon for
protection and the rubber used is designed to
withstand constant motion of water drawn from
the twin-turbine pump.
Product Story

* Our products comply with RoHS regulations
* Specifications may vary based on different regions
Specifications
Model Number
CPU Socket Support
Model
Package Dimensions ( H x W x D)
SR24
2 PCS
IW-LC-SR24
1.5kg/ 3.3lbs
2.1kg/ 4.6lbs
IW-LC-SR36
1.8kg/ 3.9lbs
2.5kg/ 5.5lbs
SR36
3 PCS
Material
Tube Length
Tube Material
Dimensions
Materials
Pump Speed
Model
Quantity Included
Dimensions
Speed Mode (PWM)
Noise Level
Airflow
Static Pressure
Connectors
Bearing Type
Intel® LGA 2066/2011-V3/2011/1366/1156/1155/1151/1150/1200
AMD® AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1/TR4
Aluminium
400 mm
Rubber with Nylon Braided Sleeve
68 x 68 x 100 mm
Copper, Plastic
2400±10%RPM
Jupiter Series AJF120
120 x 120 x 26 mm
PWM 500-2500 RPM +/- 10%
23 dBA (normal)
101.5 CFM (max)
4.22 mm-H2O
4-pin (12V, PWM) , 3-pin (5V, ARGB)
Double Ball Bearing
5 Years
Radiator
Water Block
& Pump
Fan
Net Weight
Gross Weight
Warranty
277 x 120 x 27 mm
(10.9 x 4.7 x 1.1")
136 x 265 x 331 mm
(5.4" x 10.4" x 13")
142 x 244 x 459 mm
(5.6" x 9.6" x 18")
397 x 120 x 27 mm
(15.6 x 4.7 x 1.1")
Dimensions

a. Intel mounting bracket x2
b. AMD mounting bracket x2
c. Jupiter AJF Fan x2
d. Intel CPU backplate x1
e. 240 Radiator x1
f. Addressable Cable to M/B (5V, 3-pin) 1 to 3 x1
g. SATA Cable (Pump+PWM）x1
h. Fan Screws x8
i. Washer x8
j. Radiator Screws x8
k. Thumbscrew Cap x4
l. Standoff Screws x4 (LGA 20XX)
m.Standoff Screws x4 (LGA 115X/1366)
n. Standoff Screws x4 (TR4)
o. Standoff Screws x4 (AMD)
p. Thermal Compound x1
q. ARGB One-Click Controller x1
SR24 Package Contents
ad
ik
q
l
e
h
g
j
i
bc
m n
o p
f

a. Intel mounting bracket x2
b. AMD mounting bracket x2
c. Jupiter AJF Fan x3
d. Intel CPU backplate x1
e. 360 Radiator x1
f. Addressable Cable to M/B (5V, 3-pin) 1 to 3 x1
g. SATA Cable (Pump+PWM）x1
h. Fan Screws x12
i. Washer x12
j. Radiator Screws x12
k. Thumbscrew Cap x4
l. Standoff Screws x4 (LGA 20XX)
m.Standoff Screws x4 (LGA 115X/1366)
n. Standoff Screws x4 (TR4)
o. Standoff Screws x4 (AMD)
p. Thermal Compound x1
q. ARGB One-Click Controller x1
SR36 Package Contents
ad
ik
q
l
e
h
g
j
i
bc
m n
o p
f

1. Install AJF120 Fans to Radiator.
Parts Required: 240mm/360mm radiator, Jupiter
AJ120 Fans, Washers, Fan Screws
2.Install Fans and Radiator combo to your
PC chassis.
Parts Required: Radiator Screws
Installation

3.Installation for motherboards
A.For Intel Motherboards (LGA115X / 1366 or LGA 20XX) :
(1) Switch the Intel backplate pins according to the CPU
socket of your motherboard.
(2) Attach the Intel backplate to the bottom of the
motherboard.
Note: Intel LGA 20XX does not require backplate
installation.
Installation
LGA 115X
LGA 1366

B. For AMD Motherboards (AMD or TR4)
Directly install the AMD standoff screws onto your motherboard.
Parts Required: Standoff Screws (AMD or TR4)
Installation
(3)Install the standoff screws onto your motherboard.
Ensure to use the correct standoff screws for your
CPU socket.
Note: Intel LGA 20XX does not require backplate
installation.
Parts Required: Standoff Screws (LGA115X / 1366 or
LGA 20XX)
Standoff Screws x4 (LGA 20XX) Standoff Screws x4 (LGA 115X/1366)
Standoff Screws x4 (TR4) Standoff Screws x4 (AMD)

Installation
Intel AMD
4.Install the Pump Unit
Parts Required: Mounting Bracket, Thumbscrew Cap,
Thermal Compound
A. Choose your Mounting Bracket according to your CPU.
B. Apply the Thermal Compound evenly on the CPU
surface.

Installation
C. Remove the protect film from the cold-plate.
D. Install the pump unit and then tighten it with the
Thumbscrews.