IPGARD SKMN-8S User manual

DESIGNED
AND MADE
IN THE USA
TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX
VIDEO
Signal Type USB 1.1 and 1.0 Keyboard and
Mouse only
Type A to B (8)
User Console
Interface
(2) USB Type-A for keyboard
and mouse connection only
AUDIO
Input (8) Connector Stereo 3.5mm
Female
Output (1) Connector Stereo 3.5mm
Female
POWER
Power Requirements
12VDC 3A (minimum) power
adapter with center-pin positive
polarity.
ENVIRONMENT
Operating Temp 32° to 104° F (0° to 40° C)
Storage Temp -4° to 140° F (-20° to 60° C)
Humidity 0-80% RH, non-condensing
CERTIFICATIONS
Security Accreditation
Common Criteria Validated To
NIAP, Protection Prole PSS
Ver. 3.0
OTHER
Emulation USB 1.1 and USB 2.0
Compatible
Control Front Panel Buttons
PART NO. QTY DESCRIPTION
SKMN-8S 1 8-port Secure KM Switch
PS12VDC3A 112V DC, 3A power adapter with
center-pin positive polarity.
1Quick Start Guide
Toll Free: [phone]
Phone: [phone]
Fax: [phone]
3291 N. Jones Blvd.,
Las Vegas, NV 89108
iPGARD.COM
NOTICE
The information contained in this document is
subject to change without notice. iPGARD makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
iPGARD will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material. No part of this document may be
photocopied, reproduced, or translated into another
language without prior written consent from
iPGARD, Inc.
20170720
SKMN-8S
Secure KM Switch
Advanced 8-Port
Secure KM Switch with Audio
Quick Start Guide
A full Manual can be downloaded from
www.ipgard.com/documentation/

AUDIO OUT
VIDEO USB IN
USB OUT
AUDIO IN
SKMN-8S
SKMN-8S
1 2 3 4 5 6 7 8
Auto-Switch
From 2 to 3
Cursor Movement
Auto-Switch
From 3 to 4
Auto-Switch
From 4 to 5
Auto-Switch
From 8 to 1
Auto-Switch
From 7 to 8
Auto-Switch
From 6 to 7
Auto-Switch
From 5 to 6
Auto-Switch
From 1 to 2
Monitor 2
Monitor 1
Monitor 3
Monitor 8
Monitor 4
Monitor 7
Monitor 5
Monitor 6
INITIAL SETUP INSTALLATION
SEE THE FULL MANUAL FOR MORE INFO.
A full Manual can be downloaded from www.
ipgard.com/documentation/
Optional display topology
After connecting all devices to the SKMN, a
default display topology conguration and
display mode will be in effect. By default the
SKMN is congured to Single-Head mode
and a topology with 8 screens arranged
horizontally starting with port 1 on the
lefthand side. If a different display topology
conguration and display mode is desired.
See the full manual for details on available
settings.
The installation setup must match one of
the SKMN’s predened display topology
congurations. This can be selected through
keyboard hotkey commands. Please refer to
“Display Topology Conguration” in the full
manual for the available display topologies.
If one or more of the input computers have
multiple displays, Multi-Head Display Mode
must be selected. Otherwise, select
Single-Head mode.
SYSTEM REQUIREMENTS
1. iPGARD Secure PSS is compatible with standard personal/portable computers, servers or
thin-clients, running operating systems such as Windows or Linux.
2. The peripheral devices that are supported by the KM are listed in the following table:
CONNECTING THE SKMN
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective
USB ports of the unit.
3. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of
the computers to the AUDIO IN ports of the unit.
4. Connect a USB keyboard and mouse in the two USB console ports.
5. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
6. Power on the KM by connecting a 12VDC power supply to the power connector, and then turn
on all the computers.
Note: The computer connected to port 1 will always be selected by default after power up.
Note: You can connect up to 8 computers to the 8 port KM.
Console Port Authorized Devices
Keyboard
Wired keyboard and keypad without internal USB hub or composite device functions,
unless the connected device has at least one endpoint which is a keyboard or mouse
HID class, KVM/KM extender;
Audio out Analog amplied speakers, Analog headphones, Digital audio appliance.
Mouse/Pointing Device Any wired mouse or trackball without internal USB hub or composite device functions,
Touch-screen, Multi-touch or digitizer, KVM/KM extender.