IPGARD SA-KMN-4S-P User manual

4 Port secure KM switch
TECHNICAL SPECIFICATIONS
SA-KMN-4S-P
Advanced 4-Port Secure
Single-head KM Switch
with Audio and CAC Support
Quick Start Guide
USB
Signal Type
USB 1.1 and 1.0 Keyboard and
Mouse only.
USB 2.0 for CAC connection.
USB Connectors (8) USB Type B
User Console Interface
(2) USB Type A for keyboard/mouse
connections;
(1) USB Type A for CAC
AUDIO
Input (4) Connector stereo 3.5 mm
female
Output (1) Connector stereo 3.5 mm
female
POWER
Power Requirements 12V DC, 3A power adapter with
center-pin positive polarity
ENVIRONMENT
Operating Temp 32° to 104° F (0° to 40° C)
Storage Temp -4° to 140° F (-20° to 60° C)
Humidity 0-80% RH, non-condensing
CERTIFICATIONS
Security
Accreditation
Common Criteria Validated To
NIAP, Protection Prole PSS Ver.
4.0
OTHER
Emulation Keyboard, mouse, and video
User Controls Front-panel buttons
WHAT’S IN THE BOX
PART NO. QTY DESCRIPTION
SA-KMN-4S-P 14-Port SH Secure KM with Audio
and CAC Support
PS12VDC2A 112-VDC, 2-A power adapter with
center-pin positive polarity.
1Quick Start Guide
A full manual can be downloaded from
www.ipgard.com/documentation/
DESIGNED
AND MADE
IN THE USA
NOTICE
The information contained in this document
is subject to change without notice. iPGARD
makes no warranty of any kind with regard
to this material, including but not limited to,
implied warranties of merchantability and
tness for a particular purpose. iPGARD
will not be liable for errors contained
herein, or for incidental or consequential
damages in connection with the furnishing,
performance, or use of this material. No
part of this document may be photocopied,
reproduced, or translated into another
language without the prior written consent
from iPGARD, Inc.
20170518
Toll Free: (888)-994-7427
Phone: [phone]
Fax: [phone]
WWW.iPGARD.COM
SA-KMN-4S-P
1 2 3 4ST1 ST2
CONSOLE
12VDC2.0A AUDIO
K/M
AUDIO AUDIO AUDIO AUDIO
K/M K/M K/M K/M
CAC
CAC CAC CAC CAC
IN-1IN-2IN-3IN-4

Cursor
Auto-switch
from 4 to 1
Auto-switch
from 1 to 2
Auto-switch
from 2 to 3
Auto-switch
from 3 to 4
Monitor 4
Monitor 3Monitor 2
Monitor 1
INITIAL SETUP INSTALLATION
SEE THE FULL MANUAL FOR MORE INFO.
A full Manual can be downloaded from www.
ipgard.com/documentation/
Optional display topology
After connecting all devices to the SA-KMN,
a default display topology conguration and
display mode will be in effect. By default the
SA-KMN is congured to Single-Head mode
and a topology with 4 screens arranged
horizontally starting with port 1 on the
lefthand side. If a different display topology
conguration and display mode is desired.
See the full manual for details on available
settings.
The installation setup must match one of
the SA-KMN’s predened display topology
congurations. This can be selected through
keyboard hotkey commands. Please refer to
“Display Topology Conguration” in the full
manual for the available display topologies.
If one or more of the input computers have
multiple displays, Multi-Head Display Mode
must be selected. Otherwise, select
Single-Head mode.
SYSTEM REQUIREMENTS
1. iPGARD Secure PSS is compatible with standard personal/portable computers, servers or thin-clients, running
operating systems such as Windows or Linux.
2. The peripheral devices that are supported by the KM are listed in the following table:
HARDWARE INSTALLATION
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the
unit.
3. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the
AUDIO IN ports of the unit.
4. Connect a USB keyboard and mouse in the two USB console ports.
5. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
6. Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port in the user console
interface.
7. Power on the KM by connecting a 12VDC power supply to the power connector, and then turn on all the
computers.
Note: The computer connected to port 1 will always be selected by default after power up.
Note: You can connect up to 4 computers to the 4 port KM.
Console Port Authorized Devices
Keyboard
Wired keyboard and keypad without internal USB hub or composite device functions,
unless the connected device has at least one endpoint which is a keyboard or mouse
HID class, KVM/KM extender;
Audio out Analog amplied speakers, Analog headphones, Digital audio appliance.
Mouse/Pointing Device Any wired mouse or trackball without internal USB hub or composite device functions,
Touch-screen, Multi-touch or digitizer, KVM/KM extender.
User Authentication
Device Smart-card reader, PIV/CAC reader, Token or Biometric reader
AUDIO OUT
VIDEO USB IN
USB OUT
CAC IN
CAC OUT
AUDIO IN
SA-KMN-4S-P
SA-KMN-4S-P
1 2 3 4ST1 ST2