iPuray BRT-483 User manual

Product Description of BRT-483 Page 1of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Timer Plug-in
Model #：BRT-483
Features:
BRT-483 is a timer plug-in of our mini-A product family. It delivers much more functionalities
than most timer plug-ins in the market can do. It is a perfect device when being used at home or
when traveling.
Compact design with flip up display and 4 operation buttons;
Up to different 24 timing periods on any given day;
USB charging port;
Charging protection, automatically turns off power when charging is completed;
Internal shutter for child safety;
Blue LED ring nightlight;
PC-V0 flame resistance material; and
Compact design and high quality build.
LCD Display and Front Panel Buttons:
Fig. 1 and Fig. 2 show the front view and the back view of BRT-483 timer plug-in respectively.
Fig. 1 Front View Fig. 2 Back View

Product Description of BRT-483 Page 2of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
As shown in Fig. 3, BRT-483 timer plug-in has a flip up LCD display on its top, a standard power
socket on its front, 4 operation buttons at its corners, and a USB charging port on its bottom.
Fig. 3 Ports, Controls and LCD Display
Specification Parameters:
Input
Voltage
110～240V(50Hz/60Hz)/10A
Operation
Environment
No-condensation 20-90% RH，
-20℃～55℃
Output
Voltage
AC: 110～240V(50Hz/60Hz), 10A
DC: 5V/1A
Wattage
AC: 2000W
Dimension
60mm x 60mm x 30mm
Weight
160g
Installation Guide:
BRT-483 has no need for further wiring installation. As shown in Fig. 4 and Fig. 5, once it is
plugged to a wall socket or extension bar, it is ready to go.
Fig. 4 Plug to a Wall Mount Socket

Product Description of BRT-483 Page 3of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
Fig. 5 Plug to an Extension Bar
BRT-483 Timer Plug-in Setup:
Using the 4 buttons and the flip up display of BRT-483, users can manually turn on or turn off the
loads, or set up timing periods to have BRT-483 automatically turn on or turn off the loads. As
shown in Fig. 6, the display shows weekdays, clock, timing period #s, and ON/Off status.
Fig. 6 LED Display
1. Set up the clock:
Once powered on, BRT-483 displays clock as follows:
Press and hold K1 button until the clocks digits flashes, and then press K1 button to select
weekdays, hours, or minutes to be changed. Pressing K3 button will increase the flashing
digits, while pressing K4 button will decrease the flashing digits. Finally, press and hold K1
button to exit setup and save the settings.

Product Description of BRT-483 Page 4of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
The setting will be saved as well if there is no button operation for 30 seconds.
2. Manual Override:
Pressing K2 button will manually turn on or turn off the load.
3. Set up Timing Periods:
Press K1 button to enter timing period set up screen as follows:
Pressing K1 button to select timing action (On or Off) or timing (weekdays, hours, or minutes)
to be set and make the selected digits flashing. Pressing K3 button will increase the flashing
digits, while Pressing K4 button will decrease the flashing digits.
Once one timing period is set up, pressing K1 button will bring up the timing setup screen
again. Repeat the above procedures to complete setting up the next timing period. Up to 24
timing periods can be set up for any day.
Finally, press and hold K1 button to exit setup and save the settings. The setting will be saved
as well if there is no button operation for 30 seconds.
4. Review or Delete Timing Settings:
Press K3 button to enter timing setting screen as follows:
The timing periods will alternate when pressing K3 button. If a timing period needs to be
deleted, pressing and hold K4 button. Finally, press and hold K3 button to exit and save the
changes.
The changes will be saved as well if there is no button operation for 30 seconds.

Product Description of BRT-483 Page 5of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
www.a-brt.com. [email protected].
© 2015 All rights reserved. Subject to change without notices.
5. Reset BRT-483:
Pressing and holding K2 button for 5 seconds will reset BRT-483 to the default settings.
6. Charging:
Connect a USB cable to the USB port.
7. Nightlight:
When the LCD shows clock, pressing K4 button will turn on or turn off the nightlight.
Applications:
BRT-483 timer plug-in is used for automatically turning on and/or turning off various loads. These
loads include fans, lights, appliances, or other kinds of electrical equipment. Its USB port is very
handy for charging digital devices too. It is perfect for bringing convenience and safety to our
daily life and work.
How to Order:
Please contact us: Shenzhen Asia Bright Industry Co., Ltd
Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China
Tel: [phone] [phone]
Fax: [phone] [phone]
Email: [e-mail] Website: www.a-brt.com