4
Pairing with main panel
Scanning the QR Code for Pairing.
• Turn on both the siren and the alarm system, reset the siren by pressing the reset
button on the back
• until it beeps. ② Scan the QR code printed on this accessory.
• The pairing result would be confirmed in App and also be indicated by 2 beeps
from siren.
Learn Mode
• Launch the App/PC client for turn on Learn Mode.
• Follow the guideline in App/PC client to trigger the accessory for the system to learn.
• The pairing result would be confirmed in App/PC client and also be indicated by 2
beeps from siren.
Hint: How to trigger?
• Power up the siren.
• Press the reset button on the back until it beeps.
Function Clarification
1. Set Up Sound & Light Mode for Status Indicating all settings can be operated in App
after pairing.
Users can determine to beeps or be silent when system alarm mode (ARM/DISARM/
HOME ARM) changes.
Users can also set up the LED indicator to stay lighting, keep blinking, or just a flash
when system alarm mode
changes. Other settings like siren time, indicating volume and alarm volume can be set
up in App too.
In default, the Sound and Light modes are listed below:
2. Anti-tamper function
The siren will immediately alarm when someone tries to remove illegally.
Main panel status LED Indicator
Status Horn Status Interval Time of
Sound Sound Frequency
Disarm Power light on Beep 3 times 150 m 1 kHz
Arm Red light flashing Beep 2 times 150 m 1 kHz
Home arm Blue light flashing - - -
SOS Red/Blue light
flashing alternately SOS sound - -
