3
Appearance
Pairing with Main Panel
Scanning the QR Code for Pairing.
• Scan the QR code printed on this accessory by App
• The APP will auto recognize smart plug, do NOT send out paring commands by APP
• now and just hold it
• Plug the smart plug on the socket or wall plug, press the LED button and LED will on
• 4 Send out the pairing commands by APP, the LED will o auto if pairing succeed.
Learn Mode (To GSM Alarm, if we doing Nova, please remove this part)
• Launch the PC client for turn on Learn Mode.
• Follow the guideline in App/PC client to trigger the accessory for the system to learn.
• The pairing result would be confirmed in App/PC client.
Hint: How to trigger?
• Plug it into the socket, light up the LED button.
• Hold the button for 10 seconds until it flashes.
LED indicator
Power/Reset Button
* We oer Smart Plug in global standards like CEE, GB, SAA, FC, etc.
CEE standard is used for reference only in this document.
