Jabra GO 6470 Safety guide

How to connect my Jabra PRO / GO with Avaya IP 2410, IP
5410, IP 6416D, IP 6416M, 6424D, 6424M
Jabra GO 6470
Prerequisite:
Jabra PRO 9460 / 9470 + Jabra Link 14201-20
In combination with one of the following Avaya devices:
IP 2410
IP 5410
IP 6416D+M/ 6424D+M
Connection:
1. Plug the supplied RJ9 to RJ9 connection cable into the socket marked
"phone" on your Jabra PRO 94x0 base and the other end to the socket
marked with a "phone" symbol on the EHS adapter.
2. Now connect the cable marked red to the socket marked "AUX" on the
EHS adapter and to the "AUX" socket on your Jabra PRO 94x0 base.
3. Now connect the cable marked white and "A" to the socket marked
"Headset/handset" on the EHS adapter and to the "headset" socket on
your phone.
Important: If you have a 6416D+M / 6424D+M phone, use the cable
marked white and "B" (instead of the cable marked "C").
Connect the ring sensor to the EHS adapter and attach it to the middle of
the phone's loudspeaker.
05/04/2021 16:19
https://www.jabra.in/supportpages/jabra-go-6470/6470-15-207-503/faq/cfcf3c30-d00a-
487b-971e-ea1f652c45b2
Page 1 of 3

Then follow the instructions on the Jabra PRO 94x0 base SmartSetup
Wizard.
Select the phone setting "Desk phone", then "Connect to a desk phone?",
"Manual".
Select adapter type "DHSG"
Base settings:
05/04/2021 16:19
https://www.jabra.in/supportpages/jabra-go-6470/6470-15-207-503/faq/cfcf3c30-d00a-
487b-971e-ea1f652c45b2
Page 2 of 3

Set the phone set-up switch to position "A".
Microphone level setup:
We recommend setting the microphone volume to 7 out of 13.
Guided setup:
As part of the installation, you can dial into your local Jabra Setup Server,
which will configure the audio path. Please follow the instructions shown
on the display. If your Jabra Setup Server is unavailable, please contact
your local Jabra support team.
05/04/2021 16:19
https://www.jabra.in/supportpages/jabra-go-6470/6470-15-207-503/faq/cfcf3c30-d00a-
487b-971e-ea1f652c45b2
Page 3 of 3