Jason.L Litewall Evolve User manual

ASSEMBLY INSTRUCTIONS
Litewall Evolve
Workstation 4 Person
Size: 1200mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set.
2 persons required for installation

Legs x2 (1625mm)
Beams x8 (800mm)
Connector Frame x1
Connector Frame T Legs x2
Feets x6
1
2
3
4
5
M8x25mm Dome Head x16
M6x40mm Hex Head x32
M6x35mm Hex Head x4
6
7
8
COMPONENTS
SCREWS
ASSEMBLY INSTRUCTIONS
Litewall Evolve
Workstation 4 Person
Size: 1200mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
1
6
5
8
4
2
7
3

ASSEMBLY INSTRUCTIONS
Litewall Evolve
Workstation 4 Person
Size: 1200mm
Screw the feet to each leg and T leg. Assemble connector frames. Attach the 2 T legs to the double connector frame
using M6x35mm hex scews x4.
Attach the remaining 4x 800mm beams to the connector frame using M8x25mm
dome head screw.
Attach 4x 800mm beams to 1625mm leg using M8x25mm dome head screw.
Attach connector frame from diagram 2 to 4 beams using M8x25mm dome
head screws. Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
0201
03 04

Attach tops to frame by tightening M6x40mm through beams & into tops.
ASSEMBLY INSTRUCTIONS
Litewall Evolve
Workstation 4 Person
Size: 1200mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05