Jason.L Quadro A leg 2 person corner workstations U... User manual

ASSEMBLY INSTRUCTIONS
Quadro A leg 2 person
corner workstations
U configuration
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Page 1 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation

ASSEMBLY INSTRUCTIONS
Quadro A leg 2 person
corner workstations
U configuration
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Page 2 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
E
Table top x2
Table top Return x2
Legs Quadro A x4
Legs Quadro A Return x2
Connector frame x1
Beam: Main desk x2
Beam: Return x2
Plastic bracket x12
Joiner plates x4
A
B
C
D
E
F
G
H
I
Allen key x2O
M8x20MM CSK x6
M8x20MM Socket head x6
M6x20MM Socket head x12
M6x30MM Socket head x12
Join plates Screws
J
K
L
M
N
COMPONENTS
SCREWS
G
F
H
I
J K L M N
A
B
C
D

ASSEMBLY INSTRUCTIONS
Quadro A leg 2 person
corner workstations
U configuration
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Using Allen Key provided, attach 2 plastic brackets per leg
(C)(D) (as per picture above) using M6x20MM (L) Socket head
screw. Do the same with Connector frame (E).
Using Allen Key provided, attach M8x20MM Socket head (K)-
screw socket half way into leg for both legs (C) and into
Connector frame (E).Page 3 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
K
L
STEP 01 STEP 02

ASSEMBLY INSTRUCTIONS
Quadro A leg 2 person
corner workstations
U configuration
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
STEP 03
Adjust extendable beam (F) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50

ASSEMBLY INSTRUCTIONS
Quadro A leg 2 person
corner workstations
U configuration
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Attach beam (F) to legs (C) and Connector frame (E)
using nut insert in legs. See point attached
Frame looks like this. Using Allen Key, attach beam (F) with Socket (J)
Page 5 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 05
J
J
J
J
STEP 04
TOP VIEW