Jason.L Quadro Wood A User manual

ASSEMBLY INSTRUCTIONS
Quadro Wood A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation

ASSEMBLY INSTRUCTIONS
Quadro Wood A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
Table top x2
Leg Quadro Wood A x2
Beam x2
Plastic bracket x8
A
B
C
D
Allen key x2J
M8x20MM CSK x4
M8x20MM Socket head x4
M6x20MM Socket head x8
M6x30MM Socket head x8
E
F
G
H
M6x30mm Mushroom head screw x4I
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
D
E F G H I
B
A

ASSEMBLY INSTRUCTIONS
Quadro Wood A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 3 of 7
Insert the bottom of the legs as shown in the
illustration. Using Allen Key provided, attach
Mushroom Head Screw (I) - for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
STEP 01 STEP 02
I

F
G
ASSEMBLY INSTRUCTIONS
Quadro Wood A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 03
Using Allen Key provided, attach 4 plastic brackets per leg (D)
(as per picture above) using M6x20MM (G) Socket head screw.
Using Allen Key provided, attach M8x20MM Socket head (F)-
screw socket half way into leg for both legs (B).
STEP 04
Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au

ASSEMBLY INSTRUCTIONS
Quadro Wood A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 05
Adjust extendable beam (C)to desired
length using markers and secure beam
at that length using screws provided
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50

ASSEMBLY INSTRUCTIONS
Quadro Wood A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 06
TOP VIEW
Attach beam (C)to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (C) with Socket (E)
STEP 07
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
E
E
E
E

ASSEMBLY INSTRUCTIONS
Quadro Wood A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 08
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktops ontop of frame. Nut inserts in top will align with
plastic joiner brackets using M6x30MM
to frame.
H
(H) sockets attach tops
TABLE TOP
BOTTOM VIEW
nut insertnut insert
nut insertnut insert